| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFTs51UHaUqaKj5bEj0vQtEZrww9gnrqb-kGVk7DAgQJPBAR+w@mail.gmail.com>
Date: Tue, 14 Jul 2020 10:24:43 -0700
From: Peter Oskolkov <posk@...k.io>
To: Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
Cc: Peter Zijlstra <peterz@...radead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Thomas Gleixner <tglx@...utronix.de>,
"Paul E . McKenney" <paulmck@...ux.ibm.com>,
Boqun Feng <boqun.feng@...il.com>,
"H . Peter Anvin" <hpa@...or.com>, Paul Turner <pjt@...gle.com>,
linux-api@...r.kernel.org,
Christian Brauner <christian.brauner@...ntu.com>,
Florian Weimer <fw@...eb.enyo.de>, carlos@...hat.com,
Peter Oskolkov <posk@...gle.com>
Subject: Re: [RFC PATCH 2/4] rseq: Allow extending struct rseq
At Google, we actually extended struct rseq (I will post the patches
here once they are fully deployed and we have specific
benefits/improvements to report). We did this by adding several fields
below __u32 flags (the last field currently), and correspondingly
increasing rseq_len in rseq() syscall. If the kernel does not know of
this extension, it will return -EINVAL due to an unexpected rseq_len;
then the application can either fall-back to the standard/upstream
rseq, or bail. If the kernel does know of this extension, it accepts
it. If the application passes the old rseq_len (32), the kernel knows
that this is an old application and treats it as such.
I looked through the archives, but I did not find specifically why the
pretty standard approach described above is considered inferior to the
one taken in this patch (freeze rseq_len at 32, add additional length
fields to struct rseq). Can these be summarized?
Thanks,
Peter
On Mon, Jul 13, 2020 at 8:04 PM Mathieu Desnoyers
<mathieu.desnoyers@...icios.com> wrote:
>
> Add a __rseq_abi.flags "RSEQ_TLS_FLAG_SIZE", which indicates support for
> extending struct rseq. This adds two new fields to struct rseq:
> user_size and kernel_size.
>
> The user_size field allows the size of the __rseq_abi definition (which
> can be overridden by symbol interposition either by a preloaded library
> or by the application) to be handed over to the kernel at registration.
> This registration can be performed by a library, e.g. glibc, which does
> not know there is interposition taking place.
>
> The kernel_size is populated by the kernel when the "RSEQ_TLS_FLAG_SIZE"
> flag is set in __rseq_abi.flags to the minimum between user_size and
> the offset of the "end" field of struct rseq as known by the kernel.
> This allows user-space to query which fields are effectively populated
> by the kernel.
>
> A rseq_size field is added to the task struct to keep track of the
> "kernel_size" effective for each thread.
>
> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
> ---
> include/linux/sched.h | 4 ++++
> include/uapi/linux/rseq.h | 37 ++++++++++++++++++++++++++++++++--
> kernel/rseq.c | 42 +++++++++++++++++++++++++++++++++------
> 3 files changed, 75 insertions(+), 8 deletions(-)
>
> diff --git a/include/linux/sched.h b/include/linux/sched.h
> index 692e327d7455..5d61a3197987 100644
> --- a/include/linux/sched.h
> +++ b/include/linux/sched.h
> @@ -1147,6 +1147,7 @@ struct task_struct {
> #ifdef CONFIG_RSEQ
> struct rseq __user *rseq;
> u32 rseq_sig;
> + u32 rseq_size;
> /*
> * RmW on rseq_event_mask must be performed atomically
> * with respect to preemption.
> @@ -1976,10 +1977,12 @@ static inline void rseq_fork(struct task_struct *t, unsigned long clone_flags)
> if (clone_flags & CLONE_VM) {
> t->rseq = NULL;
> t->rseq_sig = 0;
> + t->rseq_size = 0;
> t->rseq_event_mask = 0;
> } else {
> t->rseq = current->rseq;
> t->rseq_sig = current->rseq_sig;
> + t->rseq_size = current->rseq_size;
> t->rseq_event_mask = current->rseq_event_mask;
> }
> }
> @@ -1988,6 +1991,7 @@ static inline void rseq_execve(struct task_struct *t)
> {
> t->rseq = NULL;
> t->rseq_sig = 0;
> + t->rseq_size = 0;
> t->rseq_event_mask = 0;
> }
>
> diff --git a/include/uapi/linux/rseq.h b/include/uapi/linux/rseq.h
> index e11d9df5e564..03c0b5e9a859 100644
> --- a/include/uapi/linux/rseq.h
> +++ b/include/uapi/linux/rseq.h
> @@ -37,6 +37,15 @@ enum rseq_cs_flags {
> (1U << RSEQ_CS_FLAG_NO_RESTART_ON_MIGRATE_BIT),
> };
>
> +enum rseq_tls_flags_bit {
> + /* enum rseq_cs_flags reserves bits 0-2. */
> + RSEQ_TLS_FLAG_SIZE_BIT = 3,
> +};
> +
> +enum rseq_tls_flags {
> + RSEQ_TLS_FLAG_SIZE = (1U << RSEQ_TLS_FLAG_SIZE_BIT),
> +};
> +
> /* The rseq_len expected by rseq registration is always 32 bytes. */
> enum rseq_len_expected {
> RSEQ_LEN_EXPECTED = 32,
> @@ -133,8 +142,9 @@ struct rseq {
> *
> * This field should only be updated by the thread which
> * registered this data structure. Read by the kernel.
> - * Mainly used for single-stepping through rseq critical sections
> - * with debuggers.
> + *
> + * The RSEQ_CS flags are mainly used for single-stepping through rseq
> + * critical sections with debuggers.
> *
> * - RSEQ_CS_FLAG_NO_RESTART_ON_PREEMPT
> * Inhibit instruction sequence block restart on preemption
> @@ -145,8 +155,31 @@ struct rseq {
> * - RSEQ_CS_FLAG_NO_RESTART_ON_MIGRATE
> * Inhibit instruction sequence block restart on migration for
> * this thread.
> + *
> + * - RSEQ_TLS_FLAG_SIZE
> + * Extensible struct rseq ABI. This flag should be statically
> + * initialized.
> */
> __u32 flags;
> + /*
> + * With __rseq_abi.flags RSEQ_TLS_FLAG_SIZE set, user_size should be
> + * statically initialized to offsetof(struct rseq, end).
> + */
> + __u16 user_size;
> + /*
> + * With __rseq_abi.flags RSEQ_TLS_FLAG_SIZE set, if the kernel supports
> + * extensible struct rseq ABI, the kernel_size field is populated by
> + * the kernel to the minimum between user_size and the offset of the
> + * "end" field within the struct rseq supported by the kernel on
> + * successful registration. Should be initialized to 0.
> + */
> + __u16 kernel_size;
> +
> + /*
> + * Very last field of the structure, to calculate size excluding padding
> + * with offsetof().
> + */
> + char end[];
> } __attribute__((aligned(4 * sizeof(__u64))));
>
> #endif /* _UAPI_LINUX_RSEQ_H */
> diff --git a/kernel/rseq.c b/kernel/rseq.c
> index a4f86a9d6937..bbc57fc18573 100644
> --- a/kernel/rseq.c
> +++ b/kernel/rseq.c
> @@ -96,6 +96,7 @@ static int rseq_update_cpu_id(struct task_struct *t)
> static int rseq_reset_rseq_cpu_id(struct task_struct *t)
> {
> u32 cpu_id_start = 0, cpu_id = RSEQ_CPU_ID_UNINITIALIZED;
> + u16 kernel_size = 0;
>
> /*
> * Reset cpu_id_start to its initial state (0).
> @@ -109,6 +110,11 @@ static int rseq_reset_rseq_cpu_id(struct task_struct *t)
> */
> if (put_user(cpu_id, &t->rseq->cpu_id))
> return -EFAULT;
> + /*
> + * Reset kernel_size to its initial state (0).
> + */
> + if (put_user(kernel_size, &t->rseq->kernel_size))
> + return -EFAULT;
> return 0;
> }
>
> @@ -266,7 +272,7 @@ void __rseq_handle_notify_resume(struct ksignal *ksig, struct pt_regs *regs)
>
> if (unlikely(t->flags & PF_EXITING))
> return;
> - if (unlikely(!access_ok(t->rseq, sizeof(*t->rseq))))
> + if (unlikely(!access_ok(t->rseq, t->rseq_size)))
> goto error;
> ret = rseq_ip_fixup(regs);
> if (unlikely(ret < 0))
> @@ -294,7 +300,7 @@ void rseq_syscall(struct pt_regs *regs)
>
> if (!t->rseq)
> return;
> - if (!access_ok(t->rseq, sizeof(*t->rseq)) ||
> + if (!access_ok(t->rseq, t->rseq_size) ||
> rseq_get_rseq_cs(t, &rseq_cs) || in_rseq_cs(ip, &rseq_cs))
> force_sig(SIGSEGV);
> }
> @@ -308,6 +314,7 @@ SYSCALL_DEFINE4(rseq, struct rseq __user *, rseq, u32, rseq_len,
> int, flags, u32, sig)
> {
> int ret;
> + u32 tls_flags;
>
> if (flags & RSEQ_FLAG_UNREGISTER) {
> if (flags & ~RSEQ_FLAG_UNREGISTER)
> @@ -315,7 +322,7 @@ SYSCALL_DEFINE4(rseq, struct rseq __user *, rseq, u32, rseq_len,
> /* Unregister rseq for current thread. */
> if (current->rseq != rseq || !current->rseq)
> return -EINVAL;
> - if (rseq_len != sizeof(*rseq))
> + if (rseq_len != RSEQ_LEN_EXPECTED)
> return -EINVAL;
> if (current->rseq_sig != sig)
> return -EPERM;
> @@ -323,6 +330,7 @@ SYSCALL_DEFINE4(rseq, struct rseq __user *, rseq, u32, rseq_len,
> if (ret)
> return ret;
> current->rseq = NULL;
> + current->rseq_size = 0;
> current->rseq_sig = 0;
> return 0;
> }
> @@ -336,7 +344,7 @@ SYSCALL_DEFINE4(rseq, struct rseq __user *, rseq, u32, rseq_len,
> * the provided address differs from the prior
> * one.
> */
> - if (current->rseq != rseq || rseq_len != sizeof(*rseq))
> + if (current->rseq != rseq || rseq_len != RSEQ_LEN_EXPECTED)
> return -EINVAL;
> if (current->rseq_sig != sig)
> return -EPERM;
> @@ -349,10 +357,32 @@ SYSCALL_DEFINE4(rseq, struct rseq __user *, rseq, u32, rseq_len,
> * ensure the provided rseq is properly aligned and valid.
> */
> if (!IS_ALIGNED((unsigned long)rseq, __alignof__(*rseq)) ||
> - rseq_len != sizeof(*rseq))
> + rseq_len != RSEQ_LEN_EXPECTED)
> return -EINVAL;
> - if (!access_ok(rseq, rseq_len))
> + if (!access_ok(rseq, RSEQ_LEN_EXPECTED))
> return -EFAULT;
> +
> + /* Handle extensible struct rseq ABI. */
> + ret = get_user(tls_flags, &rseq->flags);
> + if (ret)
> + return ret;
> + if (tls_flags & RSEQ_TLS_FLAG_SIZE) {
> + u16 user_size, kernel_size;
> +
> + ret = get_user(user_size, &rseq->user_size);
> + if (ret)
> + return ret;
> + if (user_size < offsetof(struct rseq, kernel_size) + sizeof(u16))
> + return -EINVAL;
> + kernel_size = min_t(u16, user_size, offsetof(struct rseq, end));
> + ret = put_user(kernel_size, &rseq->kernel_size);
> + if (ret)
> + return ret;
> + current->rseq_size = kernel_size;
> + } else {
> + current->rseq_size = offsetof(struct rseq, user_size);
> + }
> +
> current->rseq = rseq;
> current->rseq_sig = sig;
> /*
> --
> 2.17.1
>
Powered by blists - more mailing lists