Message-ID: <20200713220023.35f7c79b@jacob-builder>
Date:   Mon, 13 Jul 2020 22:00:23 -0700
From:   Jacob Pan <jacob.jun.pan@...ux.intel.com>
To:     Alex Williamson <alex.williamson@...hat.com>
Cc:     iommu@...ts.linux-foundation.org,
        LKML <linux-kernel@...r.kernel.org>,
        Joerg Roedel <joro@...tes.org>,
        "Lu Baolu" <baolu.lu@...ux.intel.com>,
        David Woodhouse <dwmw2@...radead.org>,
        Yi Liu <yi.l.liu@...el.com>,
        "Tian, Kevin" <kevin.tian@...el.com>,
        Raj Ashok <ashok.raj@...el.com>,
        "Christoph Hellwig" <hch@...radead.org>,
        Jean-Philippe Brucker <jean-philippe@...aro.com>,
        Eric Auger <eric.auger@...hat.com>,
        Jonathan Corbet <corbet@....net>, jacob.jun.pan@...ux.intel.com
Subject: Re: [PATCH v4 1/5] docs: IOMMU user API

Hi Alex,

On Mon, 13 Jul 2020 16:48:42 -0600
Alex Williamson <alex.williamson@...hat.com> wrote:

> On Tue,  7 Jul 2020 16:43:45 -0700
> Jacob Pan <jacob.jun.pan@...ux.intel.com> wrote:
> 
> > IOMMU UAPI is newly introduced to support communications between
> > guest virtual IOMMU and host IOMMU. There has been lots of
> > discussions on how it should work with VFIO UAPI and userspace in
> > general.
> > 
> > This document is indended to clarify the UAPI design and usage. The
> > mechenics of how future extensions should be achieved are also
> > covered  
> 
> mechanics
> 
will fix.

> > in this documentation.
> > 
> > Signed-off-by: Liu Yi L <yi.l.liu@...el.com>
> > Signed-off-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> > ---
> >  Documentation/userspace-api/iommu.rst | 312
> > ++++++++++++++++++++++++++++++++++ 1 file changed, 312 insertions(+)
> >  create mode 100644 Documentation/userspace-api/iommu.rst
> > 
> > diff --git a/Documentation/userspace-api/iommu.rst
> > b/Documentation/userspace-api/iommu.rst new file mode 100644
> > index 000000000000..581b462c2cec
> > --- /dev/null
> > +++ b/Documentation/userspace-api/iommu.rst
> > @@ -0,0 +1,312 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +.. iommu:
> > +
> > +=====================================
> > +IOMMU Userspace API
> > +=====================================
> > +
> > +IOMMU UAPI is used for virtualization cases where communications
> > are +needed between physical and virtual IOMMU drivers. For native
> > +usage, IOMMU is a system device which does not need to communicate
> > +with user space directly.
> > +
> > +The primary use cases are guest Shared Virtual Address (SVA) and
> > +guest IO virtual address (IOVA), wherein a virtual IOMMU (vIOMMU)
> > is +required to communicate with the physical IOMMU in the host.
> > +
> > +.. contents:: :local:
> > +
> > +Functionalities
> > +===============
> > +Communications of user and kernel involve both directions. The
> > +supported user-kernel APIs are as follows:
> > +
> > +1. Alloc/Free PASID
> > +2. Bind/unbind guest PASID (e.g. Intel VT-d)
> > +3. Bind/unbind guest PASID table (e.g. ARM sMMU)
> > +4. Invalidate IOMMU caches
> > +5. Service page requests
> > +
> > +Requirements
> > +============
> > +The IOMMU UAPIs are generic and extensible to meet the following
> > +requirements:
> > +
> > +1. Emulated and para-virtualised vIOMMUs
> > +2. Multiple vendors (Intel VT-d, ARM sMMU, etc.)
> > +3. Extensions to the UAPI shall not break existing user space
> > +
> > +Interfaces
> > +==========
> > +Although the data structures defined in IOMMU UAPI are
> > self-contained, +there is no user API functions introduced.
> > Instead, IOMMU UAPI is +designed to work with existing user driver
> > frameworks such as VFIO. +
> > +Extension Rules & Precautions
> > +-----------------------------
> > +When IOMMU UAPI gets extended, the data structures can *only* be
> > +modified in two ways:
> > +
> > +1. Adding new fields by re-purposing the padding[] field. No size
> > change. +2. Adding new union members at the end. May increase in
> > size. +
> > +No new fields can be added *after* the variable sized union in
> > that it +will break backward compatibility when offset moves. In
> > both cases, a +new flag must be accompanied with a new field such
> > that the IOMMU +driver can process the data based on the new flag.
> > Version field is +only reserved for the unlikely event of UAPI
> > upgrade at its entirety. +
> > +It's *always* the caller's responsibility to indicate the size of
> > the +structure passed by setting argsz appropriately.
> > +Though at the same time, argsz is user provided data which is not
> > +trusted. The argsz field allows the user to indicate how much data
> > +they're providing, it's still the kernel's responsibility to
> > validate +whether it's correct and sufficient for the requested
> > operation. +
> > +Compatibility Checking
> > +----------------------
> > +When IOMMU UAPI extension results in size increase, user such as
> > VFIO +has to handle the following cases:
> > +
> > +1. User and kernel has exact size match
> > +2. An older user with older kernel header (smaller UAPI size)
> > running on a
> > +   newer kernel (larger UAPI size)
> > +3. A newer user with newer kernel header (larger UAPI size) running
> > +   on an older kernel.
> > +4. A malicious/misbehaving user pass illegal/invalid size but
> > within
> > +   range. The data may contain garbage.  
> 
> I'm still not sure where VFIO has responsibility in managing any of
> these cases.  I think we've determined that VFIO is just the wrapper
> and call-through mechanism, it's the UAPI core implementation and
> IOMMU drivers that are responsible for this.
> 
That is right, I shall rewrite the responsibility to be held by IOMMU
core.
"When IOMMU UAPI extension results in size increase, IOMMU UAPI core
shall handle the following cases:"

> > +
> > +Feature Checking
> > +----------------
> > +While launching a guest with vIOMMU, it is important to ensure
> > that host +can support the UAPI data structures to be used for
> > vIOMMU-pIOMMU +communications. Without upfront compatibility
> > checking, future faults +are difficult to report even in normal
> > conditions. For example, TLB +invalidations should always succeed.
> > There is no architectural way to +report back to the vIOMMU if the
> > UAPI data is incompatible. If that +happens, in order to protect
> > IOMMU iosolation guarantee, we have to +resort to not giving
> > completion status in vIOMMU. This may result in +VM hang.
> > +
> > +For this reason the following IOMMU UAPIs cannot fail:
> > +
> > +1. Free PASID
> > +2. Unbind guest PASID
> > +3. Unbind guest PASID table (SMMU)
> > +4. Cache invalidate
> > +
> > +User applications such as QEMU is expected to import kernel UAPI  
> 
> s/is/are/
> 
will fix.

> > +headers. Backward compatibility is supported per feature flags.
> > +For example, an older QEMU (with older kernel header) can run on
> > newer +kernel. Newer QEMU (with new kernel header) may refuse to
> > initialize +on an older kernel if new feature flags are not
> > supported by older +kernel. Simply recompile existing code with
> > newer kernel header should  
> 
> s/recompile/recompiling/
> 
got it.

> > +not be an issue in that only existing flags are used.
> > +
> > +IOMMU vendor driver should report the below features to IOMMU UAPI
> > +consumers (e.g. via VFIO).
> > +
> > +1. IOMMU_NESTING_FEAT_SYSWIDE_PASID
> > +2. IOMMU_NESTING_FEAT_BIND_PGTBL
> > +3. IOMMU_NESTING_FEAT_BIND_PASID_TABLE
> > +4. IOMMU_NESTING_FEAT_CACHE_INVLD
> > +5. IOMMU_NESTING_FEAT_PAGE_REQUEST
> > +
> > +Take VFIO as example, upon request from VFIO user space (e.g.
> > QEMU), +VFIO kernel code shall query IOMMU vendor driver for the
> > support of +the above features. Query result can then be reported
> > back to the +user-space caller. Details can be found in
> > +Documentation/driver-api/vfio.rst.
> > +
> > +
> > +Data Passing Example with VFIO
> > +------------------------------
> > +As the ubiquitous userspace driver framework, VFIO is already IOMMU
> > +aware and share many key concepts such as device model, group,
> > and  
> 
> s/share/shares/
> 
got it.

> > +protection domain. Other user driver frameworks can also be
> > extended +to support IOMMU UAPI but it is outside the scope of this
> > document. +
> > +In this tight-knit VFIO-IOMMU interface, the ultimate consumer of
> > the +IOMMU UAPI data is the host IOMMU driver. VFIO facilitates
> > user-kernel +transport, capability checking, security, and life
> > cycle management of +process address space ID (PASID).
> > +
> > +Unlike normal user data passed via VFIO UAPI IOTCL, IOMMU driver
> > is the +ultimate consumer of its UAPI data. At VFIO layer, the
> > IOMMU UAPI data +is wrapped in a VFIO UAPI data. It follows the
> > +pattern below::
> > +
> > +   struct {
> > +	__u32 argsz;
> > +	__u32 flags;
> > +	__u8  data[];
> > +   };
> > +
> > +Here data[] contains the IOMMU UAPI data structures. VFIO has the
> > +freedom to bundle the data as well as parse data size based on its
> > own flags. +
> > +In order to determine the size and feature set of the user data,
> > argsz +and flags are also embedded in the IOMMU UAPI data
> > structures. +A "__u32 argsz" field is *always* at the beginning of
> > each structure. +
> > +For example:
> > +::
> > +
> > +   struct iommu_cache_invalidate_info {
> > +	__u32	argsz;
> > +	#define IOMMU_CACHE_INVALIDATE_INFO_VERSION_1 1
> > +	__u32	version;
> > +	/* IOMMU paging structure cache */
> > +	#define IOMMU_CACHE_INV_TYPE_IOTLB	(1 << 0) /*
> > IOMMU IOTLB */
> > +	#define IOMMU_CACHE_INV_TYPE_DEV_IOTLB	(1 << 1) /*
> > Device IOTLB */
> > +	#define IOMMU_CACHE_INV_TYPE_PASID	(1 << 2) /*
> > PASID cache */
> > +	#define IOMMU_CACHE_INV_TYPE_NR		(3)
> > +	__u8	cache;
> > +	__u8	granularity;
> > +	__u8	padding[2];  
> 
> Now would be the right time to add more than just minimum alignment
> padding for future use.  Also note that we have 4-byte alignment
> leading into the union, it could be desirable to pad that out to
> 8-byte alignment anyway.
> 
make sense, will do padding[6]

> > +	union {
> > +		struct iommu_inv_pasid_info pasid_info;
> > +		struct iommu_inv_addr_info addr_info;
> > +	} granu;
> > +   };
> > +
> > +VFIO is responsible for checking its own argsz and flags then
> > invokes +appropriate IOMMU UAPI functions. User pointer is passed
> > to IOMMU +layer for further processing. The responsibilities are
> > divided as +follows:
> > +
> > +- Generic IOMMU layer checks argsz range and override out-of-range
> > +  value.
> > +
> > +- Generic IOMMU layer checks content of the UAPI data for non-zero
> > +  reserved bits in flags, padding fields, and unsupported version.
> > +  This is to ensure not breaking userspace in the future when these
> > +  fields or flags are used.
> > +
> > +- Vendor IOMMU driver checks argsz based on vendor flags, UAPI data
> > +  is consumed based on flags
> > +
> > +Once again, use guest TLB invalidation as an example, argsz is
> > based +on generic flags in the invalidation information. IOMMU
> > generic code +shall process the UAPI data as the following:
> > +
> > +::
> > +
> > + static int iommu_check_cache_invl_data(struct
> > iommu_cache_invalidate_info *info)
> > + {
> > +	int ret = 0;
> > +	u32 mask;
> > +
> > +	if (info->version != IOMMU_CACHE_INVALIDATE_INFO_VERSION_1)
> > +		return -EINVAL;
> > +
> > +	mask =  IOMMU_CACHE_INV_TYPE_IOTLB |
> > +		IOMMU_CACHE_INV_TYPE_DEV_IOTLB |
> > +		IOMMU_CACHE_INV_TYPE_PASID;  
> 
> Can TYPE_NR be used here?  ie.  ((1 << IOMMU_CACHE_INV_TYPE_NR) - 1)
> 
much better, thanks!

> > +	if (info->cache & ~mask) {
> > +		pr_warn_ratelimited("Invalid cache types %x\n",
> > info->cache);  
> 
> Even ratelimited, this is too much for a user triggered error, at most
> these should be some sort of debug level.  Should probably just drop
> them for production.
> 
I felt a little too chatty as well. will drop, we have a lot of these.

> > +		return -EINVAL;
> > +	}
> > +
> > +	if (info->granularity >= IOMMU_INV_GRANU_NR) {
> > +		pr_warn_ratelimited("Invalid cache invalidation
> > granu %x\n",
> > +				info->granularity);
> > +		return -EINVAL;
> > +	}
> > +
> > +	switch (info->granularity) {
> > +	case IOMMU_INV_GRANU_ADDR:
> > +		mask = IOMMU_INV_ADDR_FLAGS_PASID |
> > +			IOMMU_INV_ADDR_FLAGS_ARCHID |
> > +			IOMMU_INV_ADDR_FLAGS_LEAF;
> > +
> > +		if (info->granu.addr_info.flags & ~mask) {
> > +			pr_warn_ratelimited("Unsupported
> > invalidation addr flags %x\n",
> > +
> > info->granu.addr_info.flags);
> > +			ret = -EINVAL;  
> 
> Why not return?  Inconsistent with above and unclear benefit.
> 
will do. thanks

> > +		}
> > +		break;
> > +	case IOMMU_INV_GRANU_PASID:
> > +		mask = IOMMU_INV_PASID_FLAGS_PASID |
> > +			IOMMU_INV_PASID_FLAGS_ARCHID;
> > +		if (info->granu.pasid_info.flags & ~mask) {
> > +			pr_warn_ratelimited("Unsupported
> > invalidation PASID flags%x\n",
> > +
> > info->granu.pasid_info.flags);
> > +			ret = -EINVAL;
> > +		}
> > +		break;
> > +	}  
> 
> 
> What happened to IOMMU_INV_GRANU_DOMAIN?  Nothing to check?  Should
> probably still be included with a 
> 
I am not sure I got the complete comments here.

IOMMU_INV_GRANU_DOMAIN does not have additional info, actually not used
for now.

> > +
> > +	if (info->padding[0] || info->padding[1]) {
> > +		pr_warn_ratelimited("Non-zero reserved fields\n");
> > +		ret = -EINVAL;
> > +	}
> > +
> > +	return ret;
> > + }
> > +
> > + int iommu_cache_invalidate(struct iommu_domain *domain, struct
> > device *dev,
> > +			   void __user *uinfo)
> > + {
> > +	struct iommu_cache_invalidate_info inv_info;
> > +	unsigned long minsz, maxsz;
> > +	int ret = 0;
> > +
> > +	if (unlikely(!domain->ops->cache_invalidate))
> > +		return -ENODEV;
> > +
> > +	/* Current kernel data size is the max to be copied from
> > user */
> > +	maxsz = sizeof(struct iommu_cache_invalidate_info);
> > +	memset((void *)&inv_info, 0, maxsz);  
> 
> initialize as = { 0 };
> 
got it.

> > +
> > +	/*
> > +	 * No new spaces can be added before the variable sized
> > union, the
> > +	 * minimum size is the offset to the union.
> > +	 */
> > +	minsz = offsetof(struct iommu_cache_invalidate_info,
> > granu); +
> > +	/* Copy minsz from user to get flags and argsz */
> > +	if (copy_from_user(&inv_info, uinfo, minsz))
> > +		return -EFAULT;
> > +
> > +	/* Fields before variable size union is mandatory */
> > +	if (inv_info.argsz < minsz)
> > +		return -EINVAL;
> > +
> > +	/*
> > +	 * User might be using a newer UAPI header which has a
> > larger data
> > +	 * size, we shall support the existing flags within the
> > current
> > +	 * size.
> > +	 */
> > +	if (inv_info.argsz > maxsz)
> > +		inv_info.argsz = maxsz;  
> 
> maxsz handling seems a little clunky, maybe only because this is the
> documentation example?
> 
Not sure I am following.
My thinking is that we wanted to support old flags even the
user is compiled with a newer header with larger struct size. But
old flags must be within the current(older) kernel UAPI struct size.
That is why we override the size here, there is no need to copy the
whole new struct.

> > +
> > +	/* Copy the remaining user data _after_ minsz */
> > +	if (copy_from_user((void *)&inv_info + minsz, uinfo +
> > minsz,
> > +				inv_info.argsz - minsz))
> > +		return -EFAULT;
> > +
> > +	/* Now the argsz is validated, check the content for
> > reserved bits */
> > +	ret = iommu_check_cache_invl_data(&inv_info);
> > +	if (ret)
> > +		return ret;
> > +
> > +	return domain->ops->cache_invalidate(domain, dev,
> > &inv_info);
> > + }
> > +
> > +Notice that in this example, since union size is determined by
> > generic +flags, all checking to argsz is validated in the generic
> > IOMMU layer, +vendor driver does not need to check argsz.  
> 
> Not true.  What if the user provided argsz = minsz and the operation
> requires an entry in the granu union?  The vendor driver needs to
> check that argsz was _at_least_ sufficient to provide that entry.
My reason is that we have no vendor specific flags in cache invalidate
UAPI. Why would vendor driver gets involved in sanity checking?
Previously in v3, we check union size against argsz but was deemed to
strict.

>  The
> mangling of the user provided argsz above makes me cringe a little too
> for that reason, once we start modifying the user values in the core
> it could get messy for the vendor drivers.
> 
We do have vendor specific union in bind_gpasid UAPI. Could you
elaborate your concern?

> > +
> > +For UAPIs that are shared with in-kernel users, a wrapper function
> > +is provided to distinguish the callers. For example,
> > +
> > +Userspace caller ::
> > +
> > +  int iommu_sva_unbind_gpasid(struct iommu_domain *domain, struct
> > device *dev,
> > +  void __user *udata)
> > +
> > +In-kernel caller ::
> > +
> > +  int __iommu_sva_unbind_gpasid(struct iommu_domain *domain,
> > struct device *dev,
> > +  struct iommu_gpasid_bind_data *data)  
> 
> Maybe just prefix with iommu_uapi rather than underscores?  Underscore
> prefixes usually imply a locking requirement or other reasons to tread
> carefully whereas this is just the internal API.  Thanks,
> 
sounds good. Thanks for explaining.

> Alex
> 

[Jacob Pan]

Powered by blists - more mailing lists