| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <011f29e6-ad71-366e-dbff-bc8471f3da60@physik.fu-berlin.de>
Date: Wed, 15 Jul 2020 01:12:33 +0200
From: John Paul Adrian Glaubitz <glaubitz@...sik.fu-berlin.de>
To: Rich Felker <dalias@...c.org>
Cc: Christoph Hellwig <hch@....de>,
Yoshinori Sato <ysato@...rs.sourceforge.jp>,
linux-sh@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: ioremap and dma cleanups and fixes for superh (2nd resend)
Hello!
I have applied Christoph's full series on top of Linus' tree and I can confirm that
the kernel boots fine on my SH-7785LCR board.
Thus, for the whole series of patches:
Tested-by: John Paul Adrian Glaubitz <glaubitz@...sik.fu-berlin.de>
However, independent of Christoph's series, the kernels throws two backtraces during
boot which I think should require a git bisect (unless I missed a configuration option
as I trimmed down the kernel a bit to make sure it's not too big).
See the traces below and let me know what you think.
Adrian
====================================================================================
## Booting kernel from Legacy Image at 89000000 ...
Image Name: Linux-5.8.0-rc5-00026-g22b7a96ec
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 4058011 Bytes = 3.9 MiB
Load Address: 80001000
Entry Point: 80002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
[ 0.000000] Linux version 5.8.0-rc5-00026-g22b7a96ece82 (glaubitz@...c) (sh4-linux-gnu-gcc (Debian 9.3.0-13) 9.3.0, GNU ld (GNU Binutils for Debian) 2.34.90.20200706) #3 PREEMPT Wed Jul 15 01:03:46 CEST 2020
[ 0.000000] Boot params:
[ 0.000000] ... MOUNT_ROOT_RDONLY - 00000000
[ 0.000000] ... RAMDISK_FLAGS - 00000000
[ 0.000000] ... ORIG_ROOT_DEV - 00000000
[ 0.000000] ... LOADER_TYPE - 00000000
[ 0.000000] ... INITRD_START - 00000000
[ 0.000000] ... INITRD_SIZE - 00000000
[ 0.000000] Booting machvec: SH7785LCR
[ 0.000000] PMB: boot mappings:
[ 0.000000] 0x00080000 -> 0x00040000 [ 512MB cached ]
[ 0.000000] 0x000a0000 -> 0x00040000 [ 16MB uncached ]
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] Renesas Technology Corp. R0P7785LC0011RL support.
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttySC1,115200 root=/dev/sda1 init=/bin/bash
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] PVR=10300700 CVR=71440211 PRR=00000250
[ 0.000000] I-cache : n_ways=4 n_sets=256 way_incr=8192
[ 0.000000] I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
[ 0.000000] D-cache : n_ways=4 n_sets=256 way_incr=8192
[ 0.000000] D-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
[ 0.000000] Memory: 510080K/524288K available (4601K kernel code, 276K rwdata, 1660K rodata, 156K init, 2966K bss, 14204K reserved, 0K cma-reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xdffd7000 - 0xdffff000 ( 160 kB)
[ 0.000000] vmalloc : 0xc0000000 - 0xdffd5000 ( 511 MB)
[ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB) (cached)
[ 0.000000] : 0xa0000000 - 0xa1000000 ( 16 MB) (uncached)
[ 0.000000] .init : 0x80666000 - 0x8068d000 ( 156 kB)
[ 0.000000] .data : 0x80480594 - 0x806658d0 (1940 kB)
[ 0.000000] .text : 0x80001000 - 0x80480594 (4605 kB)
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 8, nr_irqs: 8, preallocated irqs: 0
[ 0.000000] intc: Registered controller 'sh7785' with 67 IRQs
[ 0.000000] intc: Registered controller 'sh7785-irq4567' with 4 IRQs
[ 0.000000] intc: Registered controller 'sh7785-irq0123' with 4 IRQs
[ 0.000000] random: get_random_bytes called from start_kernel+0x264/0x5c2 with crng_init=0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] sh-tmu.0: ch0: used for clock events
[ 0.000000] sh-tmu.0: ch0: used for periodic clock events
[ 0.000000] sh-tmu.0: ch1: used as clock source
[ 0.000000] clocksource: sh-tmu.0: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 152900847964 ns
[ 0.000000] sh-tmu.1: ch0: used for clock events
[ 0.000000] sh-tmu.1: ch1: used as clock source
[ 0.000000] clocksource: sh-tmu.1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 152900847964 ns
[ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 8589934590000000ns
[ 0.000000] Calibrating delay loop (skipped)... 599.99 BogoMIPS PRESET (lpj=1199999)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] LSM: Security Framework initializing
[ 0.000000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.012000] CPU: SH7785
[ 0.016000] Performance Events: sh4a support registered
[ 0.020000] rcu: Hierarchical SRCU implementation.
[ 0.024000] devtmpfs: initialized
[ 0.044000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.044000] futex hash table entries: 256 (order: 0, 7168 bytes, linear)
[ 0.048000] pinctrl core: initialized pinctrl subsystem
[ 0.060000] NET: Registered protocol family 16
[ 0.140000] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.144000] audit: initializing netlink subsys (disabled)
[ 0.148000] audit: type=2000 audit(0.144:1): state=initialized audit_enabled=0 res=1
[ 0.168000] cpuidle: using governor ladder
[ 0.168000] cpuidle: using governor menu
[ 0.228000] sh-pfc pfc-sh7785: sh7785_pfc handling gpio 0 -> 110
[ 0.232000] sh-pfc pfc-sh7785: sh7785_pfc handling gpio 111 -> 275
[ 0.232000] sh-pfc pfc-sh7785: sh7785_pfc support registered
[ 0.232000] HW Breakpoints: SH-4A UBC support registered
[ 0.232000] PCI: Starting initialization.
[ 0.484000] PCI: Found a Renesas SH7785 host controller, revision 1.
[ 0.484000] PCI: Checking 66MHz capabilities...
[ 0.484000] PCI: Running at 66MHz.
[ 0.932000] HugeTLB registered 1.00 MiB page size, pre-allocated 0 pages
[ 0.980000] SCSI subsystem initialized
[ 0.988000] libata version 3.00 loaded.
[ 1.004000] usbcore: registered new interface driver usbfs
[ 1.004000] usbcore: registered new interface driver hub
[ 1.008000] usbcore: registered new device driver usb
[ 1.016000] sh_tmu sh-tmu.0: kept as earlytimer
[ 1.020000] sh_tmu sh-tmu.1: kept as earlytimer
[ 1.024000] random: fast init done
[ 1.048000] DMA: Registering sh_dmac handler (12 channels).
[ 1.096000] DMA: Registering DMA API.
[ 1.100000] PCI host bridge to bus 0000:00
[ 1.100000] pci_bus 0000:00: root bus resource [io 0x1000-0x3fffff]
[ 1.100000] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff]
[ 1.100000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 1.100000] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 1.104000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.104000] pci_bus 0000:00: scanning bus
[ 1.104000] pci 0000:00:00.0: [10ec:8169] type 00 class 0x020000
[ 1.104000] pci 0000:00:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 1.104000] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x000000ff]
[ 1.104000] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 1.104000] pci 0000:00:00.0: supports D1 D2
[ 1.104000] pci 0000:00:00.0: PME# supported from D1 D2 D3hot
[ 1.104000] pci 0000:00:00.0: PME# disabled
[ 1.108000] pci 0000:00:01.0: [1095:3512] type 00 class 0x018000
[ 1.108000] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
[ 1.108000] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
[ 1.108000] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
[ 1.108000] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
[ 1.108000] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
[ 1.108000] pci 0000:00:01.0: reg 0x24: [mem 0x00000000-0x000001ff]
[ 1.108000] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 1.108000] pci 0000:00:01.0: supports D1 D2
[ 1.116000] pci_bus 0000:00: fixups for bus
[ 1.116000] pci_bus 0000:00: bus scan returning with max=00
[ 1.116000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 1.116000] pci 0000:00:01.0: BAR 6: assigned [mem 0xfd000000-0xfd07ffff pref]
[ 1.116000] pci 0000:00:00.0: BAR 6: assigned [mem 0xfd080000-0xfd09ffff pref]
[ 1.116000] pci 0000:00:01.0: BAR 5: assigned [mem 0xfd0a0000-0xfd0a01ff]
[ 1.116000] pci 0000:00:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 1.116000] pci 0000:00:00.0: BAR 1: assigned [mem 0xfd0a0200-0xfd0a02ff]
[ 1.116000] pci 0000:00:01.0: BAR 4: assigned [io 0x1400-0x140f]
[ 1.116000] pci 0000:00:01.0: BAR 0: assigned [io 0x1410-0x1417]
[ 1.116000] pci 0000:00:01.0: BAR 2: assigned [io 0x1418-0x141f]
[ 1.116000] pci 0000:00:01.0: BAR 1: assigned [io 0x1420-0x1423]
[ 1.116000] pci 0000:00:01.0: BAR 3: assigned [io 0x1424-0x1427]
[ 1.120000] clocksource: Switched to clocksource sh-tmu.0
[ 1.124000] sh_tmu sh-tmu.0: ch0: used for oneshot clock events
[ 1.456000] NET: Registered protocol family 2
[ 1.464000] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 6144 bytes, linear)
[ 1.464000] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 1.464000] TCP bind hash table entries: 4096 (order: 4, 81920 bytes, linear)
[ 1.464000] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.464000] UDP hash table entries: 256 (order: 1, 12288 bytes, linear)
[ 1.464000] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes, linear)
[ 1.468000] NET: Registered protocol family 1
[ 1.468000] PCI: CLS 0 bytes, default 32
[ 1.468000] sq: Registering store queue API.
[ 1.512000] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 1.536000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.536000] io scheduler mq-deadline registered
[ 1.544000] SuperH (H)SCI(F) driver initialized
[ 1.544000] sh-sci.0: ttySC0 at MMIO 0xffea0000 (irq = 40, base_baud = 0) is a scif
[ 1.560000] sh-sci.1: ttySC1 at MMIO 0xffeb0000 (irq = 44, base_baud = 0) is a scif
[ 1.560000] BUG: spinlock bad magic on CPU#0, swapper/1
[ 1.560000] lock: sci_ports+0x1d8/0xb10, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[ 1.560000] CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc5-00026-g22b7a96ece82 #3
[ 1.560000] Stack: (0x9f445ce8 to 0x9f446000)
[ 1.560000] 5ce0:
[ 1.560000]
[ 1.560000]
[ 1.560000] 80260daa
[ 1.560000] 9f445cfc
[ 1.560000] 80048fd8
[ 1.560000] 8096c158
[ 1.560000] 805ab908
[ 1.560000] 8004449c
[ 1.560000]
[ 1.560000] 5d00:
[ 1.560000] 9f445d08
[ 1.560000] 00000000
[ 1.560000] ffffffff
[ 1.560000] 00000000
[ 1.560000] 8004455e
[ 1.560000] 9f445d24
[ 1.560000] 8064b2c0
[ 1.560000] 8096c158
[ 1.560000]
[ 1.560000] 5d20:
[ 1.560000] 8096c158
[ 1.560000] 8047e57c
[ 1.560000] 9f445d30
[ 1.560000] 00000000
[ 1.560000] 802b850a
[ 1.560000] 9f445d40
[ 1.560000] 8096c158
[ 1.560000] 9f66694c
[ 1.560000]
[ 1.560000] 5d40:
[ 1.560000] 9f445d70
[ 1.560000] 0000002c
[ 1.560000] 00000000
[ 1.560000] 805cc1a0
[ 1.560000] 9f4d7660
[ 1.560000] 9f666a88
[ 1.560000] 805e101c
[ 1.560000] 0000002c
[ 1.560000]
[ 1.560000] 5d60:
[ 1.560000] 9f647d80
[ 1.560000] 9f445d70
[ 1.560000] 00000000
[ 1.560000] 9f666a48
[ 1.560000] 4f494d4d
[ 1.560000] 66783020
[ 1.560000] 30626566
[ 1.560000] 00303030
[ 1.560000]
[ 1.560000] 5d80:
[ 1.560000] 9f445d9c
[ 1.560000] 00000000
[ 1.560000] 8096bf7c
[ 1.560000] 8062deb4
[ 1.560000] 8096bf80
[ 1.560000] 8096c158
[ 1.560000] 8096c158
[ 1.560000] 8096c214
[ 1.560000]
[ 1.560000] 5da0:
[ 1.560000] 9f445db0
[ 1.560000] 805cc298
[ 1.560000] 805cc29c
[ 1.560000] 00000000
[ 1.560000] b6b1ed6c
[ 1.560000] 802bc842
[ 1.560000] 9f445dd4
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000] 5dc0:
[ 1.560000] 8096bf7c
[ 1.560000] 8096c158
[ 1.560000] 8096bf80
[ 1.560000] 8096c158
[ 1.560000] 00000001
[ 1.560000] 00000000
[ 1.560000] 9f4d81c8
[ 1.560000] 805e5c0c
[ 1.560000]
[ 1.560000] 5de0:
[ 1.560000] 8062dec0
[ 1.560000] 8062e050
[ 1.560000] 802c9890
[ 1.560000] 9f445e08
[ 1.560000] 00000000
[ 1.560000] 8096cd10
[ 1.560000] 8062df3c
[ 1.560000] 8096ce20
[ 1.560000]
[ 1.560000] 5e00:
[ 1.560000] 8062dec0
[ 1.560000] 8064b1b4
[ 1.560000] 802c7cdc
[ 1.560000] 9f445e18
[ 1.560000] 8062dec0
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 8064b1b4
[ 1.560000]
[ 1.560000] 5e20:
[ 1.560000] 802c7fe6
[ 1.560000] 9f445e40
[ 1.560000] 8064b1f4
[ 1.560000] 8064bb08
[ 1.560000] 8062724c
[ 1.560000] 00000000
[ 1.560000] 8064b1b4
[ 1.560000] 8062dec0
[ 1.560000]
[ 1.560000] 5e40:
[ 1.560000] 802c81ce
[ 1.560000] 9f445e54
[ 1.560000] 00000000
[ 1.560000] 8064b1b4
[ 1.560000] 8062dec0
[ 1.560000] 802c8220
[ 1.560000] 9f445e68
[ 1.560000] 802627f4
[ 1.560000]
[ 1.560000] 5e60:
[ 1.560000] 8062dec0
[ 1.560000] 8064b1b4
[ 1.560000] 802c619a
[ 1.560000] 9f445e7c
[ 1.560000] 802627f4
[ 1.560000] 802c81e0
[ 1.560000] 8064b1b4
[ 1.560000] 8047e4e0
[ 1.560000]
[ 1.560000] 5e80:
[ 1.560000] 9f40bc70
[ 1.560000] 9f40f5c0
[ 1.560000] b6b1ed6c
[ 1.560000] 802c778a
[ 1.560000] 9f445ea4
[ 1.560000] 8064bac8
[ 1.560000] 00000000
[ 1.560000] 9f664f60
[ 1.560000]
[ 1.560000] 5ea0:
[ 1.560000] 8064b1b4
[ 1.560000] 802c71d2
[ 1.560000] 9f445eac
[ 1.560000] 805a0d88
[ 1.560000] 802c87cc
[ 1.560000] 9f445ed0
[ 1.560000] 8068d000
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000] 5ec0:
[ 1.560000] 8062724c
[ 1.560000] 9f445efc
[ 1.560000] 8068d008
[ 1.560000] 8064b1b4
[ 1.560000] 802c9856
[ 1.560000] 9f445ee4
[ 1.560000] 9f445efc
[ 1.560000] 8068d008
[ 1.560000]
[ 1.560000] 5ee0:
[ 1.560000] 80678800
[ 1.560000] 80678816
[ 1.560000] 9f445eec
[ 1.560000] 80002292
[ 1.560000] 9f445ef4
[ 1.560000] 9f422dd6
[ 1.560000] 00000000
[ 1.560000] 8002d300
[ 1.560000]
[ 1.560000] 5f00:
[ 1.560000] 9f445f0c
[ 1.560000] 000000b2
[ 1.560000] 9f445f0c
[ 1.560000] 00000006
[ 1.560000] 00000006
[ 1.560000] 00000000
[ 1.560000] 805dda74
[ 1.560000] 8061f9f0
[ 1.560000]
[ 1.560000] 5f20:
[ 1.560000] 80666098
[ 1.560000] 00000000
[ 1.560000] 9f422dea
[ 1.560000] 00000000
[ 1.560000] 9f422de5
[ 1.560000] 9f422dea
[ 1.560000] b6b1ed6c
[ 1.560000] 80666c92
[ 1.560000]
[ 1.560000] 5f40:
[ 1.560000] 9f445f5c
[ 1.560000] 000000b2
[ 1.560000] 80685900
[ 1.560000] 9f422dc0
[ 1.560000] 806858e0
[ 1.560000] 8068d008
[ 1.560000] 8061f9f0
[ 1.560000] 00000006
[ 1.560000]
[ 1.560000] 5f60:
[ 1.560000] 00000006
[ 1.560000] 00000000
[ 1.560000] 80666098
[ 1.560000] 8068a6d0
[ 1.560000] 00000007
[ 1.560000] 804778b4
[ 1.560000] 9f445f94
[ 1.560000] 80636160
[ 1.560000]
[ 1.560000] 5f80:
[ 1.560000] 80477788
[ 1.560000] 8063659c
[ 1.560000] 00000000
[ 1.560000] 9f442020
[ 1.560000] 80048fd8
[ 1.560000] 80007224
[ 1.560000] 9f449f28
[ 1.560000] 9f442020
[ 1.560000]
[ 1.560000] 5fa0:
[ 1.560000] 80034b98
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 804778a4
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000] 5fc0:
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000] 5fe0:
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 40008000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000] 00000000
[ 1.560000]
[ 1.560000]
[ 1.560000] Call trace:
[ 1.560000] [<(ptrval)>] dump_stack+0x1a/0x30
[ 1.560000] [<(ptrval)>] printk+0x0/0x50
[ 1.560000] [<(ptrval)>] spin_dump+0x58/0x88
[ 1.560000] [<(ptrval)>] do_raw_spin_lock+0x4a/0x94
[ 1.560000] [<(ptrval)>] _raw_spin_lock_irqsave+0x24/0x44
[ 1.560000] [<(ptrval)>] uart_add_one_port+0x32a/0x470
[ 1.560000] [<(ptrval)>] sci_probe+0x116/0x2f4
[ 1.560000] [<(ptrval)>] platform_drv_probe+0x1c/0x60
[ 1.560000] [<(ptrval)>] really_probe+0xc0/0x2c8
[ 1.560000] [<(ptrval)>] driver_probe_device+0x26/0x6c
[ 1.560000] [<(ptrval)>] device_driver_attach+0x4a/0x5c
[ 1.560000] [<(ptrval)>] __driver_attach+0x40/0xc4
[ 1.560000] [<(ptrval)>] klist_next+0x0/0xe4
[ 1.560000] [<(ptrval)>] bus_for_each_dev+0x56/0xa8
[ 1.560000] [<(ptrval)>] klist_next+0x0/0xe4
[ 1.560000] [<(ptrval)>] __driver_attach+0x0/0xc4
[ 1.560000] [<(ptrval)>] _raw_spin_lock+0x10/0x28
[ 1.560000] [<(ptrval)>] driver_attach+0x12/0x24
[ 1.560000] [<(ptrval)>] bus_add_driver+0x13a/0x1bc
[ 1.560000] [<(ptrval)>] driver_register+0x50/0xf8
[ 1.560000] [<(ptrval)>] __platform_driver_register+0x22/0x40
[ 1.560000] [<(ptrval)>] sci_init+0x0/0x34
[ 1.560000] [<(ptrval)>] sci_init+0x16/0x34
[ 1.560000] [<(ptrval)>] do_one_initcall+0x5e/0x164
[ 1.560000] [<(ptrval)>] parse_args+0xe0/0x2b8
[ 1.560000] [<(ptrval)>] ignore_unknown_bootoption+0x0/0xc
[ 1.560000] [<(ptrval)>] kernel_init_freeable+0xf6/0x1e0
[ 1.560000] [<(ptrval)>] ignore_unknown_bootoption+0x0/0xc
[ 1.560000] [<(ptrval)>] kernel_init+0x10/0x100
[ 1.560000] [<(ptrval)>] debug_smp_processor_id+0x0/0x24
[ 1.560000] [<(ptrval)>] printk+0x0/0x50
[ 1.560000] [<(ptrval)>] ret_from_kernel_thread+0xc/0x14
[ 1.560000] [<(ptrval)>] schedule_tail+0x0/0x88
[ 1.560000] [<(ptrval)>] kernel_init+0x0/0x100
[ 1.560000]
[ 3.248000] printk: console [ttySC1] enabled
[ 3.264000] sh-sci.2: ttySC2 at MMIO 0xffec0000 (irq = 60, base_baud = 0) is a scif
[ 3.284000] sh-sci.3: ttySC3 at MMIO 0xffed0000 (irq = 61, base_baud = 0) is a scif
[ 3.304000] sh-sci.4: ttySC4 at MMIO 0xffee0000 (irq = 62, base_baud = 0) is a scif
[ 3.324000] sh-sci.5: ttySC5 at MMIO 0xffef0000 (irq = 63, base_baud = 0) is a scif
[ 3.628000] brd: module loaded
[ 3.816000] loop: module loaded
[ 3.820000] sm501 sm501: SM501 At (ptrval): Version 050100c0, 4 Mb, IRQ 10
[ 3.828000] sm501 sm501: setting M1XCLK to 112000000
[ 3.856000] sm501 sm501: setting MCLK to 84000000
[ 3.884000] sm501-fb[0] [mem 0x13e80000-0x13e8ffff]
[ 3.888000] sm501-fb[1] [mem 0x13f00000-0x13f4ffff]
[ 3.892000] sm501-fb[2] [mem 0x10000000-0x103fffff]
[ 3.896000] sm501-fb[3] [irq 10]
[ 3.920000] sata_sil 0000:00:01.0: assign IRQ: got 66
[ 3.928000] sata_sil 0000:00:01.0: version 2.4
[ 3.932000] sata_sil 0000:00:01.0: enabling device (0000 -> 0003)
[ 3.940000] sata_sil 0000:00:01.0: cache line size not set. Driver may not function
[ 3.948000] sata_sil 0000:00:01.0: Applying R_ERR on DMA activate FIS errata fix
[ 3.956000] sata_sil 0000:00:01.0: enabling bus mastering
[ 4.004000] scsi host0: sata_sil
[ 4.020000] scsi host1: sata_sil
[ 4.036000] ata1: SATA max UDMA/100 mmio m512@...d0a0000 tf 0xfd0a0080 irq 66
[ 4.044000] ata2: SATA max UDMA/100 mmio m512@...d0a0000 tf 0xfd0a00c0 irq 66
[ 4.068000] physmap-flash physmap-flash.0: physmap platform flash device: [mem 0x00000000-0x03ffffff]
[ 4.076000] physmap-flash.0: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000001 Chip ID 0x002201
[ 4.088000] Amd/Fujitsu Extended Query Table at 0x0040
[ 4.092000] Amd/Fujitsu Extended Query version 1.3.
[ 4.100000] number of CFI chips: 1
[ 4.108000] Creating 4 MTD partitions on "physmap-flash.0":
[ 4.116000] 0x000000000000-0x000000080000 : "loader"
[ 4.176000] 0x000000080000-0x000000100000 : "bootenv"
[ 4.232000] 0x000000100000-0x000000500000 : "kernel"
[ 4.288000] 0x000000500000-0x000004000000 : "data"
[ 4.364000] ata1: SATA link down (SStatus 0 SControl 310)
[ 4.388000] r8169 0000:00:00.0: assign IRQ: got 65
[ 4.396000] r8169 0000:00:00.0: enabling device (0000 -> 0003)
[ 4.404000] r8169 0000:00:00.0: enabling bus mastering
[ 4.444000] libphy: r8169: probed
[ 4.468000] r8169 0000:00:00.0 eth0: RTL8169sc/8110sc, 74:90:50:00:02:03, XID 180, IRQ 65
[ 4.476000] r8169 0000:00:00.0 eth0: jumbo features [frames: 7146 bytes, tx checksumming: ok]
[ 4.504000] r8a66597_hcd r8a66597_hcd: USB Host Controller
[ 4.512000] r8a66597_hcd r8a66597_hcd: new USB bus registered, assigned bus number 1
[ 4.520000] r8a66597_hcd r8a66597_hcd: irq 2, io base 0x08000000
[ 4.564000] hub 1-0:1.0: USB hub found
[ 4.568000] hub 1-0:1.0: 2 ports detected
[ 4.600000] usbcore: registered new interface driver usb-storage
[ 4.612000] mousedev: PS/2 mouse device common for all mice
[ 4.624000] PCA9564/PCA9665 at 0x06000000: PCA9564 detected.
[ 4.632000] PCA9564/PCA9665 at 0x06000000: Choosing the clock frequency based on index is deprecated. Use the nominal frequency.
[ 4.644000] (null): No reset-pin found. Chip may get stuck!
[ 4.648000] PCA9564/PCA9665 at 0x06000000: Clock frequency is 330kHz
[ 4.660000] i2c-pca-platform i2c-pca-platform: registered.
[ 4.672000] cpufreq: SuperH CPU frequency driver.
[ 4.680000] cpufreq: cpufreq_online: ->get() failed
[ 4.696000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4.716000] ata2.00: ATA-9: TOSHIBA THNSNJ128GCSU, JURA0101, max UDMA/100
[ 4.724000] usbcore: registered new interface driver usbhid
[ 4.728000] usbhid: USB HID core driver
[ 4.732000] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.744000] NET: Registered protocol family 10
[ 4.748000] ata2.00: READ LOG DMA EXT failed, trying PIO
[ 4.764000] ata2.00: configured for UDMA/100
[ 4.772000] Segment Routing with IPv6
[ 4.776000] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.792000] scsi 1:0:0:0: Direct-Access ATA TOSHIBA THNSNJ12 0101 PQ: 0 ANSI: 5
[ 4.836000] NET: Registered protocol family 17
[ 4.852000] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 4.860000] heartbeat: version 0.1.2 loaded
[ 4.868000] sd 1:0:0:0: [sda] Write Protect is off
[ 4.876000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.884000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.896000] kmemleak: Kernel memory leak detector initialized (mem pool available: 15858)
[ 4.904000] kmemleak: Automatic memory scanning thread started
[ 4.940000] sda: sda1 sda2 sda3
[ 4.976000] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.988000] usb 1-1: new high-speed USB device number 2 using r8a66597_hcd
[ 5.252000] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 5.272000] scsi host2: usb-storage 1-1:1.0
[ 5.364000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.372000] VFS: Mounted root (ext4 filesystem) on device 8:1.
[ 5.396000] devtmpfs: mounted
[ 5.400000] Freeing unused kernel memory: 156K
[ 5.404000] This architecture does not have kernel memory protection.
[ 5.412000] Run /bin/bash as init process
[ 5.416000] with arguments:
[ 5.420000] /bin/bash
[ 5.420000] with environment:
[ 5.424000] HOME=/
[ 5.428000] TERM=linux
[ 5.464000] ------------[ cut here ]------------
[ 5.464000] WARNING: CPU: 0 PID: 1 at mm/slab.c:2589 cache_alloc_refill+0x216/0x6a0
[ 5.464000] Modules linked in:
[ 5.464000]
[ 5.464000] CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc5-00026-g22b7a96ece82 #3
[ 5.464000] PC is at cache_alloc_refill+0x216/0x6a0
[ 5.464000] PR is at kmem_cache_alloc+0xd6/0x128
[ 5.464000] PC : 800ec0d2 SP : 9f445e68 SR : 400080f0
[ 5.464000] TEA : c00c30d0
[ 5.464000] R0 : 8062724c R1 : 8000fee8 R2 : 9f403540 R3 : 00000100
[ 5.464000] R4 : 9f403500 R5 : 00000000 R6 : 8068d5b0 R7 : 007fffff
[ 5.464000] R8 : 0000000c R9 : 9f403500 R10 : 8096fc0c R11 : 80044410
[ 5.464000] R12 : 9f405060 R13 : 00000dc0 R14 : 9f445e68
[ 5.464000] MACH: 10623bba MACL: 00000cc0 GBR : 2957bd58 PR : 800ec80a
[ 5.464000]
[ 5.464000] Call trace:
[ 5.464000] [<(ptrval)>] _raw_spin_unlock_irqrestore+0x0/0x54
[ 5.464000] [<(ptrval)>] _raw_spin_lock_irqsave+0x0/0x44
[ 5.464000] [<(ptrval)>] kmem_cache_alloc+0xd6/0x128
[ 5.464000] [<(ptrval)>] arch_local_irq_restore+0x0/0x2c
[ 5.464000] [<(ptrval)>] __raw_spin_lock_init+0x0/0x1c
[ 5.464000] [<(ptrval)>] pgd_alloc+0x10/0x24
[ 5.464000] [<(ptrval)>] memset+0x0/0x8c
[ 5.464000] [<(ptrval)>] __raw_spin_lock_init+0x0/0x1c
[ 5.464000] [<(ptrval)>] mm_init.isra.0+0x10e/0x194
[ 5.464000] [<(ptrval)>] mm_alloc+0x2a/0x4c
[ 5.464000] [<(ptrval)>] _raw_spin_unlock+0x0/0x44
[ 5.464000] [<(ptrval)>] __do_execve_file+0x2a6/0x97c
[ 5.464000] [<(ptrval)>] kmemleak_alloc+0x1e/0x30
[ 5.464000] [<(ptrval)>] arch_local_irq_restore+0x0/0x2c
[ 5.464000] [<(ptrval)>] getname_kernel+0x24/0xf8
[ 5.464000] [<(ptrval)>] do_execve+0x1a/0x28
[ 5.464000] [<(ptrval)>] debug_smp_processor_id+0x0/0x24
[ 5.464000] [<(ptrval)>] printk+0x0/0x50
[ 5.464000] [<(ptrval)>] run_init_process+0x5c/0x90
[ 5.464000] [<(ptrval)>] kernel_init+0x5c/0x100
[ 5.464000] [<(ptrval)>] ret_from_kernel_thread+0xc/0x14
[ 5.464000] [<(ptrval)>] schedule_tail+0x0/0x88
[ 5.464000] [<(ptrval)>] kernel_init+0x0/0x100
[ 5.464000]
[ 5.464000] Code:
[ 5.464000] 800ec0cc:
[ 5.464000] mov.w
[ 5.464000] 800ec222 <cache_alloc_refill+0x366/0x6a0>
[ 5.464000] ,
[ 5.464000] r3
[ 5.464000] ! 00000100 <0x100>
[ 5.464000]
[ 5.464000] 800ec0ce:
[ 5.464000] tst
[ 5.464000] r3
[ 5.464000] ,
[ 5.464000] r13
[ 5.464000]
[ 5.464000] 800ec0d0:
[ 5.464000] bt
[ 5.464000] 800ec0d4
[ 5.464000]
[ 5.464000] ->800ec0d2:
[ 5.464000] trapa
[ 5.464000] #62
[ 5.464000]
[ 5.464000] 800ec0d4:
[ 5.464000] mov.w
[ 5.464000] 800ec224 <cache_alloc_refill+0x368/0x6a0>
[ 5.464000] ,
[ 5.464000] r1
[ 5.464000] ! 00000400 <0x400>
[ 5.464000]
[ 5.464000] 800ec0d6:
[ 5.464000] mov
[ 5.464000] r13
[ 5.464000] ,
[ 5.464000] r2
[ 5.464000]
[ 5.464000] 800ec0d8:
[ 5.464000] mov.l
[ 5.464000] 800ec238 <cache_alloc_refill+0x37c/0x6a0>
[ 5.464000] ,
[ 5.464000] r12
[ 5.464000] ! 003beee0 <0x3beee0>
[ 5.464000]
[ 5.464000] 800ec0da:
[ 5.464000] and
[ 5.464000] r1
[ 5.464000] ,
[ 5.464000] r2
[ 5.464000]
[ 5.464000] 800ec0dc:
[ 5.464000] tst
[ 5.464000] r1
[ 5.464000] ,
[ 5.464000] r13
[ 5.464000]
[ 5.464000]
[ 5.464000] ---[ end trace 8fe2f9c439309f6b ]---
bash: cannot set terminal process group (-1): Inappropriate ioctl for device
bash: no job control in this shell
root@(none):/# [ 6.340000] usb 1-1: address 2, EndpointAddress 0x02 use DMA FIFO
[ 6.344000] usb 1-1: address 2, EndpointAddress 0x81 use DMA FIFO
[ 6.352000] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 6.392000] sd 2:0:0:0: [sdb] 7936000 512-byte logical blocks: (4.06 GB/3.78 GiB)
[ 6.404000] sd 2:0:0:0: [sdb] Write Protect is off
[ 6.408000] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 6.416000] sd 2:0:0:0: [sdb] No Caching mode page found
[ 6.420000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6.456000] sdb: sdb1
[ 6.480000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
====================================================================================
[ 5.464000] ------------[ cut here ]------------
[ 5.464000] WARNING: CPU: 0 PID: 1 at mm/slab.c:2589 cache_alloc_refill+0x216/0x6a0
[ 5.464000] Modules linked in:
[ 5.464000]
[ 5.464000] CPU: 0 PID: 1 Comm: swapper Not tainted 5.8.0-rc5-00026-g22b7a96ece82 #3
[ 5.464000] PC is at cache_alloc_refill+0x216/0x6a0
[ 5.464000] PR is at kmem_cache_alloc+0xd6/0x128
[ 5.464000] PC : 800ec0d2 SP : 9f445e68 SR : 400080f0
[ 5.464000] TEA : c00c30d0
[ 5.464000] R0 : 8062724c R1 : 8000fee8 R2 : 9f403540 R3 : 00000100
[ 5.464000] R4 : 9f403500 R5 : 00000000 R6 : 8068d5b0 R7 : 007fffff
[ 5.464000] R8 : 0000000c R9 : 9f403500 R10 : 8096fc0c R11 : 80044410
[ 5.464000] R12 : 9f405060 R13 : 00000dc0 R14 : 9f445e68
[ 5.464000] MACH: 10623bba MACL: 00000cc0 GBR : 2957bd58 PR : 800ec80a
[ 5.464000]
[ 5.464000] Call trace:
[ 5.464000] [<(ptrval)>] _raw_spin_unlock_irqrestore+0x0/0x54
[ 5.464000] [<(ptrval)>] _raw_spin_lock_irqsave+0x0/0x44
[ 5.464000] [<(ptrval)>] kmem_cache_alloc+0xd6/0x128
[ 5.464000] [<(ptrval)>] arch_local_irq_restore+0x0/0x2c
[ 5.464000] [<(ptrval)>] __raw_spin_lock_init+0x0/0x1c
[ 5.464000] [<(ptrval)>] pgd_alloc+0x10/0x24
[ 5.464000] [<(ptrval)>] memset+0x0/0x8c
[ 5.464000] [<(ptrval)>] __raw_spin_lock_init+0x0/0x1c
[ 5.464000] [<(ptrval)>] mm_init.isra.0+0x10e/0x194
[ 5.464000] [<(ptrval)>] mm_alloc+0x2a/0x4c
[ 5.464000] [<(ptrval)>] _raw_spin_unlock+0x0/0x44
[ 5.464000] [<(ptrval)>] __do_execve_file+0x2a6/0x97c
[ 5.464000] [<(ptrval)>] kmemleak_alloc+0x1e/0x30
[ 5.464000] [<(ptrval)>] arch_local_irq_restore+0x0/0x2c
[ 5.464000] [<(ptrval)>] getname_kernel+0x24/0xf8
[ 5.464000] [<(ptrval)>] do_execve+0x1a/0x28
[ 5.464000] [<(ptrval)>] debug_smp_processor_id+0x0/0x24
[ 5.464000] [<(ptrval)>] printk+0x0/0x50
[ 5.464000] [<(ptrval)>] run_init_process+0x5c/0x90
[ 5.464000] [<(ptrval)>] kernel_init+0x5c/0x100
[ 5.464000] [<(ptrval)>] ret_from_kernel_thread+0xc/0x14
[ 5.464000] [<(ptrval)>] schedule_tail+0x0/0x88
[ 5.464000] [<(ptrval)>] kernel_init+0x0/0x100
[ 5.464000]
[ 5.464000] Code:
[ 5.464000] 800ec0cc:
[ 5.464000] mov.w
[ 5.464000] 800ec222 <cache_alloc_refill+0x366/0x6a0>
[ 5.464000] ,
[ 5.464000] r3
[ 5.464000] ! 00000100 <0x100>
[ 5.464000]
[ 5.464000] 800ec0ce:
[ 5.464000] tst
[ 5.464000] r3
[ 5.464000] ,
[ 5.464000] r13
[ 5.464000]
[ 5.464000] 800ec0d0:
[ 5.464000] bt
[ 5.464000] 800ec0d4
[ 5.464000]
[ 5.464000] ->800ec0d2:
[ 5.464000] trapa
[ 5.464000] #62
[ 5.464000]
[ 5.464000] 800ec0d4:
[ 5.464000] mov.w
[ 5.464000] 800ec224 <cache_alloc_refill+0x368/0x6a0>
[ 5.464000] ,
[ 5.464000] r1
[ 5.464000] ! 00000400 <0x400>
[ 5.464000]
[ 5.464000] 800ec0d6:
[ 5.464000] mov
[ 5.464000] r13
[ 5.464000] ,
[ 5.464000] r2
[ 5.464000]
[ 5.464000] 800ec0d8:
[ 5.464000] mov.l
[ 5.464000] 800ec238 <cache_alloc_refill+0x37c/0x6a0>
[ 5.464000] ,
[ 5.464000] r12
[ 5.464000] ! 003beee0 <0x3beee0>
[ 5.464000]
[ 5.464000] 800ec0da:
[ 5.464000] and
[ 5.464000] r1
[ 5.464000] ,
[ 5.464000] r2
[ 5.464000]
[ 5.464000] 800ec0dc:
[ 5.464000] tst
[ 5.464000] r1
[ 5.464000] ,
[ 5.464000] r13
[ 5.464000]
[ 5.464000]
[ 5.464000] ---[ end trace 8fe2f9c439309f6b ]---
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaubitz@...ian.org
`. `' Freie Universitaet Berlin - glaubitz@...sik.fu-berlin.de
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
Powered by blists - more mailing lists