linux-kernel - [PATCH v4 0/4] Add support for vibrator motor for TBS A711 Tablet

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200714102303.3007896-1-megous@megous.com>
Date:   Tue, 14 Jul 2020 12:22:59 +0200
From:   Ondrej Jirman <megous@...ous.com>
To:     linux-sunxi@...glegroups.com,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Maxime Ripard <mripard@...nel.org>,
        Chen-Yu Tsai <wens@...e.org>
Cc:     Ondrej Jirman <megous@...ous.com>, Luca Weiss <luca@...tu.xyz>,
        Tomas Novotny <tomas@...otny.cz>, linux-input@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v4 0/4] Add support for vibrator motor for TBS A711 Tablet

The tablet has a vibrator motor. This patch series exposes it via
input subsystem (EV_FF).

I'd like to ask input maintainers to take the patches 1 and 2.
Patches 3 and 4 should go via the sunxi tree.

The change to the vibrator driver is meant to enable toggling the
vibrator motor just via a power supply itself. There's not additional
gpio driven switch on this tablet between the power supply for the
motor and the motor.

Please take a look.

Changes in v4:
- Added DT reviewed-by tag
- Fixed motor typo

Changes in v3:
- Changed dt-binding to require at least one of enable/supply, dropped ack
- Changed driver to bail out if neither supply nor gpio is given

Changes in v2:
- Added DT ack tag
- Add more information to the commit log (re use of LDO for the power)


thank you and regards,
  Ondrej Jirman

Ondrej Jirman (4):
  dt-bindings: input: gpio-vibrator: Don't require enable-gpios
  input: gpio-vibra: Allow to use vcc-supply alone to control the
    vibrator
  ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor
  ARM: dts: sun8i-a83t-tbs-a711: Increase voltage on the vibrator

 .../devicetree/bindings/input/gpio-vibrator.yaml   |  7 ++++++-
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts          |  9 +++++++--
 drivers/input/misc/gpio-vibra.c                    | 14 ++++++++++----
 3 files changed, 23 insertions(+), 7 deletions(-)

-- 
2.27.0