lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200714102303.3007896-4-megous@megous.com>
Date:   Tue, 14 Jul 2020 12:23:02 +0200
From:   Ondrej Jirman <megous@...ous.com>
To:     linux-sunxi@...glegroups.com,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Maxime Ripard <mripard@...nel.org>,
        Chen-Yu Tsai <wens@...e.org>
Cc:     Ondrej Jirman <megous@...ous.com>, Luca Weiss <luca@...tu.xyz>,
        Tomas Novotny <tomas@...otny.cz>, linux-input@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v4 3/4] ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor

The board has a vibrator motor. Hook it to the input subsystem.

According to the PMIC specification, LDO needs to be enabled (value 0b11)
to achieve the specified max driving current of 150mA. We can't drive
the motor with just GPIO mode.

In GPIO mode the chip is probably just using the regular CMOS logic
output circuitry (typically limited to around 20-35mA, but not specified
in this datasheet).

Signed-off-by: Ondrej Jirman <megous@...ous.com>
---
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index bfc9bb277a49..a278a1e33930 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -99,6 +99,11 @@ panel_input: endpoint {
 		};
 	};
 
+	vibrator {
+		compatible = "gpio-vibrator";
+		vcc-supply = <&reg_ldo_io1>;
+	};
+
 	reg_gps: reg-gps {
 		compatible = "regulator-fixed";
 		regulator-name = "gps";
-- 
2.27.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ