linux-kernel - Re: [PATCH v9 2/2] PCI: xilinx-cpm: Add Versal CPM Root Port driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAL_JsqLqJXPi-V37QgOVBCHkBZoHFfc5U+9C1kbgyN2oG03hMA@mail.gmail.com>
Date:   Tue, 14 Jul 2020 08:17:21 -0600
From:   Rob Herring <robh@...nel.org>
To:     Bharat Kumar Gogada <bharatku@...inx.com>
Cc:     "lorenzo.pieralisi@....com" <lorenzo.pieralisi@....com>,
        PCI <linux-pci@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Marc Zyngier <maz@...nel.org>
Subject: Re: [PATCH v9 2/2] PCI: xilinx-cpm: Add Versal CPM Root Port driver

On Mon, Jul 13, 2020 at 6:24 AM Bharat Kumar Gogada <bharatku@...inx.com> wrote:
>
> > Subject: Re: [PATCH v9 2/2] PCI: xilinx-cpm: Add Versal CPM Root Port driver
> >
> > On Fri, Jul 10, 2020 at 09:16:57AM -0600, Rob Herring wrote:
> > > On Tue, Jun 16, 2020 at 6:57 AM Bharat Kumar Gogada
> > > <bharat.kumar.gogada@...inx.com> wrote:
> > > >
> > > > - Add support for Versal CPM as Root Port.
> > > > - The Versal ACAP devices include CCIX-PCIe Module (CPM). The
> > integrated
> > > >   block for CPM along with the integrated bridge can function
> > > >   as PCIe Root Port.
> > > > - Bridge error and legacy interrupts in Versal CPM are handled using
> > > >   Versal CPM specific interrupt line.
> > > >
> > > > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@...inx.com>
> > > > ---
> > > >  drivers/pci/controller/Kconfig           |   8 +
> > > >  drivers/pci/controller/Makefile          |   1 +
> > > >  drivers/pci/controller/pcie-xilinx-cpm.c | 617
> > > > +++++++++++++++++++++++++++++++
> > > >  3 files changed, 626 insertions(+)
> > > >  create mode 100644 drivers/pci/controller/pcie-xilinx-cpm.c
> > >
> > > [...]
> > >
> > > > +static int xilinx_cpm_pcie_probe(struct platform_device *pdev) {
> > > > +       struct xilinx_cpm_pcie_port *port;
> > > > +       struct device *dev = &pdev->dev;
> > > > +       struct pci_host_bridge *bridge;
> > > > +       struct resource *bus_range;
> > > > +       int err;
> > > > +
> > > > +       bridge = devm_pci_alloc_host_bridge(dev, sizeof(*port));
> > > > +       if (!bridge)
> > > > +               return -ENODEV;
> > > > +
> > > > +       port = pci_host_bridge_priv(bridge);
> > > > +
> > > > +       port->dev = dev;
> > > > +
> > > > +       err = pci_parse_request_of_pci_ranges(dev, &bridge->windows,
> > > > +                                             &bridge->dma_ranges, &bus_range);
> > > > +       if (err) {
> > > > +               dev_err(dev, "Getting bridge resources failed\n");
> > > > +               return err;
> > > > +       }
> > > > +
> > > > +       err = xilinx_cpm_pcie_init_irq_domain(port);
> > > > +       if (err)
> > > > +               return err;
> > > > +
> > > > +       err = xilinx_cpm_pcie_parse_dt(port, bus_range);
> > > > +       if (err) {
> > > > +               dev_err(dev, "Parsing DT failed\n");
> > > > +               goto err_parse_dt;
> > > > +       }
> > > > +
> > > > +       xilinx_cpm_pcie_init_port(port);
> > > > +
> > > > +       err = xilinx_cpm_setup_irq(port);
> > > > +       if (err) {
> > > > +               dev_err(dev, "Failed to set up interrupts\n");
> > > > +               goto err_setup_irq;
> > > > +       }
> > >
> > > All the h/w init here can be moved to an .init() function in ecam ops
> > > and then use pci_host_common_probe. Given this is v9, that can be a
> > > follow-up I guess.
> >
> > I think there is time to get it done, Bharat please let me know if you can
> > repost it shortly with Rob's requested change implemented.
> >
> Thanks Rob for your time.
> Thanks Lorenzo, the reason I cannot use pci_host_common_probe is,
> I need pci_config_window locally as the we use same ecam space for local bridge register access.
> In xilinx_cpm_pcie_parse_dt funciton
> port->reg_base = port->cfg->win;

The .init() function is passed cfg, so what's the issue? You'll need
to alloc struct xilinx_cpm_pcie_port and then set it to cfg->priv. I'd
expect some fields to also be removed as there's no reason to store
things twice.

Rob