| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 15 Jul 2020 17:22:29 -0300
From: Ezequiel Garcia <ezequiel@...labora.com>
To: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Tomasz Figa <tfiga@...omium.org>, kernel@...labora.com,
Jonas Karlman <jonas@...boo.se>,
Hans Verkuil <hverkuil@...all.nl>,
Alexandre Courbot <acourbot@...omium.org>,
Jeffrey Kardatzke <jkardatzke@...omium.org>,
Nicolas Dufresne <nicolas.dufresne@...labora.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Maxime Ripard <mripard@...nel.org>,
Paul Kocialkowski <paul.kocialkowski@...tlin.com>,
Ezequiel Garcia <ezequiel@...labora.com>
Subject: [PATCH 06/10] media: uapi: h264: Cleanup DPB entry interface
As discussed recently, the current interface for the
Decoded Picture Buffer is not enough to properly
support field coding.
This commit introduces enough semantics to support
frame and field coding, and to signal how DPB entries
are "used for reference".
Signed-off-by: Ezequiel Garcia <ezequiel@...labora.com>
---
.../media/v4l/ext-ctrls-codec.rst | 46 ++++++++++++-------
drivers/media/v4l2-core/v4l2-h264.c | 4 +-
drivers/staging/media/rkvdec/rkvdec-h264.c | 8 ++--
include/media/h264-ctrls.h | 8 +++-
4 files changed, 42 insertions(+), 24 deletions(-)
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index dd8e5a2e8986..46d4c8c6ad47 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -2058,10 +2058,35 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
* - __s32
- ``bottom_field_order_cnt``
-
+ * - enum :c:type:`v4l2_h264_dpb_reference`
+ - ``reference``
+ - Specifies how the DPB entry is referenced.
* - __u32
- ``flags``
- See :ref:`DPB Entry Flags <h264_dpb_flags>`
+.. c:type:: v4l2_h264_dpb_reference
+
+.. cssclass:: longtable
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+ * - ``V4L2_H264_DPB_TOP_REF``
+ - 0x1
+ - The top field in field pair is used for
+ short-term reference.
+ * - ``V4L2_H264_DPB_BOTTOM_REF``
+ - 0x2
+ - The bottom field in field pair is used for
+ short-term reference.
+ * - ``V4L2_H264_DPB_FRAME_REF``
+ - 0x3
+ - The frame (or the top/bottom fields, if it's a field pair)
+ is used for short-term reference.
+
.. _h264_dpb_flags:
``DPB Entries Flags``
@@ -2075,29 +2100,16 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
* - ``V4L2_H264_DPB_ENTRY_FLAG_VALID``
- 0x00000001
- - The DPB entry is valid and should be considered
+ - The DPB entry is valid (non-empty) and should be considered.
* - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE``
- 0x00000002
- - The DPB entry is currently being used as a reference frame
+ - The DPB entry is used for reference.
* - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM``
- 0x00000004
- - The DPB entry is a long term reference frame
+ - The DPB entry is used for long-term reference.
* - ``V4L2_H264_DPB_ENTRY_FLAG_FIELD``
- 0x00000008
- - The DPB entry is a field reference, which means only one of the field
- will be used when decoding the new frame/field. When not set the DPB
- entry is a frame reference (both fields will be used). Note that this
- flag does not say anything about the number of fields contained in the
- reference frame, it just describes the one used to decode the new
- field/frame
- * - ``V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD``
- - 0x00000010
- - The DPB entry is a bottom field reference (only the bottom field of the
- reference frame is needed to decode the new frame/field). Only valid if
- V4L2_H264_DPB_ENTRY_FLAG_FIELD is set. When
- V4L2_H264_DPB_ENTRY_FLAG_FIELD is set but
- V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD is not, that means the
- DPB entry is a top field reference
+ - The DPB entry is a single field or a complementary field pair.
``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (enum)``
Specifies the decoding mode to use. Currently exposes slice-based and
diff --git a/drivers/media/v4l2-core/v4l2-h264.c b/drivers/media/v4l2-core/v4l2-h264.c
index edf6225f0522..306a51683606 100644
--- a/drivers/media/v4l2-core/v4l2-h264.c
+++ b/drivers/media/v4l2-core/v4l2-h264.c
@@ -66,10 +66,10 @@ v4l2_h264_init_reflist_builder(struct v4l2_h264_reflist_builder *b,
else
b->refs[i].frame_num = dpb[i].frame_num;
- if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_FIELD))
+ if (dpb[i].reference & V4L2_H264_DPB_FRAME_REF)
pic_order_count = min(dpb[i].top_field_order_cnt,
dpb[i].bottom_field_order_cnt);
- else if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD)
+ else if (dpb[i].reference & V4L2_H264_DPB_BOTTOM_REF)
pic_order_count = dpb[i].bottom_field_order_cnt;
else
pic_order_count = dpb[i].top_field_order_cnt;
diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index 7b66e2743a4f..57539c630422 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -953,11 +953,11 @@ static void config_registers(struct rkvdec_ctx *ctx,
RKVDEC_COLMV_USED_FLAG_REF;
if (!(dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_FIELD))
- refer_addr |= RKVDEC_TOPFIELD_USED_REF |
- RKVDEC_BOTFIELD_USED_REF;
- else if (dpb[i].flags & V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD)
+ refer_addr |= RKVDEC_FIELD_REF;
+
+ if (dpb[i].reference & V4L2_H264_DPB_TOP_REF)
refer_addr |= RKVDEC_BOTFIELD_USED_REF;
- else
+ else if (dpb[i].reference & V4L2_H264_DPB_BOTTOM_REF)
refer_addr |= RKVDEC_TOPFIELD_USED_REF;
writel_relaxed(dpb[i].top_field_order_cnt,
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
index 620ee8863d74..52f3976b986c 100644
--- a/include/media/h264-ctrls.h
+++ b/include/media/h264-ctrls.h
@@ -202,7 +202,12 @@ struct v4l2_ctrl_h264_slice_params {
#define V4L2_H264_DPB_ENTRY_FLAG_ACTIVE 0x02
#define V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM 0x04
#define V4L2_H264_DPB_ENTRY_FLAG_FIELD 0x08
-#define V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD 0x10
+
+enum v4l2_h264_dpb_reference {
+ V4L2_H264_DPB_TOP_REF = 0x1,
+ V4L2_H264_DPB_BOTTOM_REF = 0x2,
+ V4L2_H264_DPB_FRAME_REF = 0x3,
+};
struct v4l2_h264_dpb_entry {
__u64 reference_ts;
@@ -211,6 +216,7 @@ struct v4l2_h264_dpb_entry {
/* Note that field is indicated by v4l2_buffer.field */
__s32 top_field_order_cnt;
__s32 bottom_field_order_cnt;
+ enum v4l2_h264_dpb_reference reference;
__u32 flags; /* V4L2_H264_DPB_ENTRY_FLAG_* */
};
--
2.27.0
Powered by blists - more mailing lists