linux-kernel - RE: [PATCH] PCI: hv: Fix a timing issue which causes kdump to fail occasionally

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <MW2PR2101MB10525DB04278B3042053FD83D77F0@MW2PR2101MB1052.namprd21.prod.outlook.com>
Date:   Thu, 16 Jul 2020 16:22:19 +0000
From:   Michael Kelley <mikelley@...rosoft.com>
To:     Wei Hu <weh@...rosoft.com>, KY Srinivasan <kys@...rosoft.com>,
        Haiyang Zhang <haiyangz@...rosoft.com>,
        Stephen Hemminger <sthemmin@...rosoft.com>,
        "wei.liu@...nel.org" <wei.liu@...nel.org>,
        "lorenzo.pieralisi@....com" <lorenzo.pieralisi@....com>,
        "robh@...nel.org" <robh@...nel.org>,
        "bhelgaas@...gle.com" <bhelgaas@...gle.com>,
        "linux-hyperv@...r.kernel.org" <linux-hyperv@...r.kernel.org>,
        "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Dexuan Cui <decui@...rosoft.com>
Subject: RE: [PATCH] PCI: hv: Fix a timing issue which causes kdump to fail
 occasionally

From: Wei Hu <weh@...rosoft.com> Sent: Thursday, July 16, 2020 8:51 AM
> 
> Kdump could fail sometime on HyperV guest over Accerlated Network
> interface. This is because the retry in hv_pci_enter_d0() relies on
> an asynchronous host event to arrive guest before calling
> hv_send_resources_allocated(). This fixes the problem by moving retry
> to hv_pci_probe(), removing this dependence and making the calling
> sequence synchronous.
> 
> Signed-off-by: Wei Hu <weh@...rosoft.com>

I'd suggest adding a "Fixes:" tag referencing commit c81992e7f4aa.

Otherwise,

Reviewed-by: Michael Kelley <mikelley@...rosoft.com>

> ---
>  drivers/pci/controller/pci-hyperv.c | 66 ++++++++++++++---------------
>  1 file changed, 32 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> index bf40ff09c99d..738ee30f3334 100644
> --- a/drivers/pci/controller/pci-hyperv.c
> +++ b/drivers/pci/controller/pci-hyperv.c
> @@ -2759,10 +2759,8 @@ static int hv_pci_enter_d0(struct hv_device *hdev)
>  	struct pci_bus_d0_entry *d0_entry;
>  	struct hv_pci_compl comp_pkt;
>  	struct pci_packet *pkt;
> -	bool retry = true;
>  	int ret;
> 
> -enter_d0_retry:
>  	/*
>  	 * Tell the host that the bus is ready to use, and moved into the
>  	 * powered-on state.  This includes telling the host which region
> @@ -2789,38 +2787,6 @@ static int hv_pci_enter_d0(struct hv_device *hdev)
>  	if (ret)
>  		goto exit;
> 
> -	/*
> -	 * In certain case (Kdump) the pci device of interest was
> -	 * not cleanly shut down and resource is still held on host
> -	 * side, the host could return invalid device status.
> -	 * We need to explicitly request host to release the resource
> -	 * and try to enter D0 again.
> -	 */
> -	if (comp_pkt.completion_status < 0 && retry) {
> -		retry = false;
> -
> -		dev_err(&hdev->device, "Retrying D0 Entry\n");
> -
> -		/*
> -		 * Hv_pci_bus_exit() calls hv_send_resource_released()
> -		 * to free up resources of its child devices.
> -		 * In the kdump kernel we need to set the
> -		 * wslot_res_allocated to 255 so it scans all child
> -		 * devices to release resources allocated in the
> -		 * normal kernel before panic happened.
> -		 */
> -		hbus->wslot_res_allocated = 255;
> -
> -		ret = hv_pci_bus_exit(hdev, true);
> -
> -		if (ret == 0) {
> -			kfree(pkt);
> -			goto enter_d0_retry;
> -		}
> -		dev_err(&hdev->device,
> -			"Retrying D0 failed with ret %d\n", ret);
> -	}
> -
>  	if (comp_pkt.completion_status < 0) {
>  		dev_err(&hdev->device,
>  			"PCI Pass-through VSP failed D0 Entry with status %x\n",
> @@ -3058,6 +3024,7 @@ static int hv_pci_probe(struct hv_device *hdev,
>  	struct hv_pcibus_device *hbus;
>  	u16 dom_req, dom;
>  	char *name;
> +	bool enter_d0_retry = true;
>  	int ret;
> 
>  	/*
> @@ -3178,11 +3145,42 @@ static int hv_pci_probe(struct hv_device *hdev,
>  	if (ret)
>  		goto free_fwnode;
> 
> +retry:
>  	ret = hv_pci_query_relations(hdev);
>  	if (ret)
>  		goto free_irq_domain;
> 
>  	ret = hv_pci_enter_d0(hdev);
> +	/*
> +	 * In certain case (Kdump) the pci device of interest was
> +	 * not cleanly shut down and resource is still held on host
> +	 * side, the host could return invalid device status.
> +	 * We need to explicitly request host to release the resource
> +	 * and try to enter D0 again.
> +	 * The retry should start from hv_pci_query_relations() call.
> +	 */
> +	if (ret == -EPROTO && enter_d0_retry) {
> +		enter_d0_retry = false;
> +
> +		dev_err(&hdev->device, "Retrying D0 Entry\n");
> +
> +		/*
> +		 * Hv_pci_bus_exit() calls hv_send_resources_released()
> +		 * to free up resources of its child devices.
> +		 * In the kdump kernel we need to set the
> +		 * wslot_res_allocated to 255 so it scans all child
> +		 * devices to release resources allocated in the
> +		 * normal kernel before panic happened.
> +		 */
> +		hbus->wslot_res_allocated = 255;
> +		ret = hv_pci_bus_exit(hdev, true);
> +
> +		if (ret == 0)
> +			goto retry;
> +
> +		dev_err(&hdev->device,
> +			"Retrying D0 failed with ret %d\n", ret);
> +	}
>  	if (ret)
>  		goto free_irq_domain;
> 
> --
> 2.20.1