[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200716070025.GF3271@Mani-XPS-13-9360>
Date: Thu, 16 Jul 2020 12:30:25 +0530
From: Manivannan Sadhasivam <mani@...nel.org>
To: Patrick Delaunay <patrick.delaunay@...com>
Cc: linux-kernel@...r.kernel.org,
Alexandre Torgue <alexandre.torgue@...com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com
Subject: Re: [PATCH] ARM: dts: stm32: Correct spi4 pins in
stm32mp15-pinctrl.dtsi
On Wed, Jul 08, 2020 at 01:43:24PM +0200, Patrick Delaunay wrote:
> Move spi4_pins_a nodes from pinctrl_z to pinctrl
> as the associated pins are not in BANK Z.
>
Yikes, that's a nasty misplacement! Thanks for fixing.
> Fixes: 498a7014989dfdd9a47864b55704dc829ed0dc90
Fixes tag should be of below:
Fixes: 498a7014989d ("ARM: dts: stm32: Add missing pinctrl entries for STM32MP15")
> Signed-off-by: Patrick Delaunay <patrick.delaunay@...com>
Reviewed-by: Manivannan Sadhasivam <mani@...nel.org>
Thanks,
Mani
> ---
>
> arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 28 ++++++++++++------------
> 1 file changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> index 7eb858732d6d..6aedbd7077ff 100644
> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> @@ -1574,6 +1574,20 @@
> };
> };
>
> + spi4_pins_a: spi4-0 {
> + pins {
> + pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
> + <STM32_PINMUX('E', 6, AF5)>; /* SPI4_MOSI */
> + bias-disable;
> + drive-push-pull;
> + slew-rate = <1>;
> + };
> + pins2 {
> + pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
> + bias-disable;
> + };
> + };
> +
> usart2_pins_a: usart2-0 {
> pins1 {
> pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
> @@ -1776,18 +1790,4 @@
> bias-disable;
> };
> };
> -
> - spi4_pins_a: spi4-0 {
> - pins {
> - pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
> - <STM32_PINMUX('E', 6, AF5)>; /* SPI4_MOSI */
> - bias-disable;
> - drive-push-pull;
> - slew-rate = <1>;
> - };
> - pins2 {
> - pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
> - bias-disable;
> - };
> - };
> };
> --
> 2.17.1
>
Powered by blists - more mailing lists