[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3a7f78c9178a6fa02dc339c3507c5229@codeaurora.org>
Date: Thu, 16 Jul 2020 13:55:43 +0530
From: Sibi Sankar <sibis@...eaurora.org>
To: Rishabh Bhatnagar <rishabhb@...eaurora.org>
Cc: linux-remoteproc@...r.kernel.org, linux-kernel@...r.kernel.org,
bjorn.andersson@...aro.org, mathieu.poirier@...aro.org,
tsoni@...eaurora.org, psodagud@...eaurora.org,
sidgup@...eaurora.org, linux-kernel-owner@...r.kernel.org
Subject: Re: [PATCH v7 3/4] remoteproc: Add inline coredump functionality
On 2020-07-10 02:01, Rishabh Bhatnagar wrote:
> The current coredump implementation uses vmalloc area to copy
> all the segments. But this might put strain on low memory targets
> as the firmware size sometimes is in tens of MBs. The situation
> becomes worse if there are multiple remote processors undergoing
> recovery at the same time. This patch adds inline coredump
> functionality that avoids extra memory usage. This requires
> recovery to be halted until data is read by userspace and free
> function is called. Also modify the qcom_q6v5_mss driver to include
> size and offset in the segment dump function.
>
> Signed-off-by: Rishabh Bhatnagar <rishabhb@...eaurora.org>
> Reviewed-by: Sibi Sankar <sibis@...eaurora.org>
> ---
> drivers/remoteproc/qcom_q6v5_mss.c | 11 ++-
> drivers/remoteproc/remoteproc_coredump.c | 160
> +++++++++++++++++++++++++++----
> include/linux/remoteproc.h | 21 +++-
> 3 files changed, 166 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c
> b/drivers/remoteproc/qcom_q6v5_mss.c
> index c6ce032..79df354 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -1199,11 +1199,12 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>
> static void qcom_q6v5_dump_segment(struct rproc *rproc,
> struct rproc_dump_segment *segment,
> - void *dest)
> + void *dest, size_t cp_offset, size_t size)
> {
> int ret = 0;
> struct q6v5 *qproc = rproc->priv;
> int offset = segment->da - qproc->mpss_reloc;
> + size_t cp_size = size ? size : segment->size;
> void *ptr = NULL;
>
> /* Unlock mba before copying segments */
> @@ -1219,16 +1220,16 @@ static void qcom_q6v5_dump_segment(struct rproc
> *rproc,
> }
>
> if (!ret)
> - ptr = ioremap_wc(qproc->mpss_phys + offset, segment->size);
> + ptr = ioremap_wc(qproc->mpss_phys + offset + cp_offset, cp_size);
>
> if (ptr) {
> - memcpy(dest, ptr, segment->size);
> + memcpy(dest, ptr, cp_size);
> iounmap(ptr);
> } else {
> - memset(dest, 0xff, segment->size);
> + memset(dest, 0xff, cp_size);
> }
>
> - qproc->current_dump_size += segment->size;
> + qproc->current_dump_size += cp_size;
>
> /* Reclaim mba after copying segments */
> if (qproc->current_dump_size == qproc->total_dump_size) {
> diff --git a/drivers/remoteproc/remoteproc_coredump.c
> b/drivers/remoteproc/remoteproc_coredump.c
> index ded0244..646886f 100644
> --- a/drivers/remoteproc/remoteproc_coredump.c
> +++ b/drivers/remoteproc/remoteproc_coredump.c
> @@ -5,6 +5,7 @@
> * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> */
>
> +#include <linux/completion.h>
> #include <linux/devcoredump.h>
> #include <linux/device.h>
> #include <linux/kernel.h>
> @@ -12,6 +13,12 @@
> #include "remoteproc_internal.h"
> #include "remoteproc_elf_helpers.h"
>
> +struct rproc_coredump_state {
> + struct rproc *rproc;
> + void *header;
> + struct completion dump_done;
> +};
> +
> /**
> * rproc_coredump_cleanup() - clean up dump_segments list
> * @rproc: the remote processor handle
> @@ -72,7 +79,8 @@ int rproc_coredump_add_custom_segment(struct rproc
> *rproc,
> dma_addr_t da, size_t size,
> void (*dumpfn)(struct rproc *rproc,
> struct rproc_dump_segment *segment,
> - void *dest),
> + void *dest, size_t offset,
> + size_t size),
> void *priv)
> {
> struct rproc_dump_segment *segment;
> @@ -114,12 +122,110 @@ int rproc_coredump_set_elf_info(struct rproc
> *rproc, u8 class, u16 machine)
> }
> EXPORT_SYMBOL(rproc_coredump_set_elf_info);
>
> +static void rproc_coredump_free(void *data)
> +{
> + struct rproc_coredump_state *dump_state = data;
> +
> + complete(&dump_state->dump_done);
> + vfree(dump_state->header);
Rishabh,
I observed a system hang when I trigger
recovery of a number of remoteproc
simultaneously (after a number of iterations
consistently). This goes away if I free the
header and then issue the dump completion
and that does seem to be the right thing to
do.
> +}
> +
> +static void *rproc_coredump_find_segment(loff_t user_offset,
> + struct list_head *segments,
> + size_t *data_left)
> +{
> + struct rproc_dump_segment *segment;
> +
> + list_for_each_entry(segment, segments, node) {
> + if (user_offset < segment->size) {
> + *data_left = segment->size - user_offset;
> + return segment;
> + }
> + user_offset -= segment->size;
> + }
> +
> + *data_left = 0;
> + return NULL;
> +}
> +
> +static void rproc_copy_segment(struct rproc *rproc, void *dest,
> + struct rproc_dump_segment *segment,
> + size_t offset, size_t size)
> +{
> + void *ptr;
> +
> + if (segment->dump) {
> + segment->dump(rproc, segment, dest, offset, size);
> + } else {
> + ptr = rproc_da_to_va(rproc, segment->da + offset, size);
> + if (!ptr) {
> + dev_err(&rproc->dev,
> + "invalid copy request for segment %pad with offset %zu and size
> %zu)\n",
> + &segment->da, offset, size);
> + memset(dest, 0xff, size);
> + } else {
> + memcpy(dest, ptr, size);
> + }
> + }
> +}
> +
> +static ssize_t rproc_coredump_read(char *buffer, loff_t offset, size_t
> count,
> + void *data, size_t header_sz)
> +{
> + size_t seg_data, bytes_left = count;
> + ssize_t copy_sz;
> + struct rproc_dump_segment *seg;
> + struct rproc_coredump_state *dump_state = data;
> + struct rproc *rproc = dump_state->rproc;
> + void *elfcore = dump_state->header;
> +
> + /* Copy the vmalloc'ed header first. */
> + if (offset < header_sz) {
> + copy_sz = memory_read_from_buffer(buffer, count, &offset,
> + elfcore, header_sz);
> +
> + return copy_sz;
> + }
> +
> + /*
> + * Find out the segment memory chunk to be copied based on offset.
> + * Keep copying data until count bytes are read.
> + */
> + while (bytes_left) {
> + seg = rproc_coredump_find_segment(offset - header_sz,
> + &rproc->dump_segments,
> + &seg_data);
> + /* EOF check */
> + if (!seg) {
> + dev_info(&rproc->dev, "Ramdump done, %lld bytes read",
> + offset);
> + break;
> + }
> +
> + copy_sz = min_t(size_t, bytes_left, seg_data);
> +
> + rproc_copy_segment(rproc, buffer, seg, seg->size - seg_data,
> + copy_sz);
> +
> + offset += copy_sz;
> + buffer += copy_sz;
> + bytes_left -= copy_sz;
> + }
> +
> + return count - bytes_left;
> +}
> +
> /**
> * rproc_coredump() - perform coredump
> * @rproc: rproc handle
> *
> * This function will generate an ELF header for the registered
> segments
> - * and create a devcoredump device associated with rproc.
> + * and create a devcoredump device associated with rproc. Based on the
> + * coredump configuration this function will directly copy the
> segments
> + * from device memory to userspace or copy segments from device memory
> to
> + * a separate buffer, which can then be read by userspace.
> + * The first approach avoids using extra vmalloc memory. But it will
> stall
> + * recovery flow until dump is read by userspace.
> */
> void rproc_coredump(struct rproc *rproc)
> {
> @@ -129,11 +235,13 @@ void rproc_coredump(struct rproc *rproc)
> size_t data_size;
> size_t offset;
> void *data;
> - void *ptr;
> u8 class = rproc->elf_class;
> int phnum = 0;
> + struct rproc_coredump_state dump_state;
> + enum rproc_dump_mechanism dump_conf = rproc->dump_conf;
>
> - if (list_empty(&rproc->dump_segments))
> + if (list_empty(&rproc->dump_segments) ||
> + dump_conf == RPROC_COREDUMP_DISABLED)
> return;
>
> if (class == ELFCLASSNONE) {
> @@ -143,7 +251,14 @@ void rproc_coredump(struct rproc *rproc)
>
> data_size = elf_size_of_hdr(class);
> list_for_each_entry(segment, &rproc->dump_segments, node) {
> - data_size += elf_size_of_phdr(class) + segment->size;
> + /*
> + * For default configuration buffer includes headers & segments.
> + * For inline dump buffer just includes headers as segments are
> + * directly read from device memory.
> + */
> + data_size += elf_size_of_phdr(class);
> + if (dump_conf == RPROC_COREDUMP_DEFAULT)
> + data_size += segment->size;
>
> phnum++;
> }
> @@ -182,23 +297,30 @@ void rproc_coredump(struct rproc *rproc)
> elf_phdr_set_p_flags(class, phdr, PF_R | PF_W | PF_X);
> elf_phdr_set_p_align(class, phdr, 0);
>
> - if (segment->dump) {
> - segment->dump(rproc, segment, data + offset);
> - } else {
> - ptr = rproc_da_to_va(rproc, segment->da, segment->size);
> - if (!ptr) {
> - dev_err(&rproc->dev,
> - "invalid coredump segment (%pad, %zu)\n",
> - &segment->da, segment->size);
> - memset(data + offset, 0xff, segment->size);
> - } else {
> - memcpy(data + offset, ptr, segment->size);
> - }
> - }
> + if (dump_conf == RPROC_COREDUMP_DEFAULT)
> + rproc_copy_segment(rproc, data + offset, segment, 0,
> + segment->size);
>
> offset += elf_phdr_get_p_filesz(class, phdr);
> phdr += elf_size_of_phdr(class);
> }
>
> - dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> + if (dump_conf == RPROC_COREDUMP_DEFAULT) {
> + dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> + return;
> + }
> +
> + /* Initialize the dump state struct to be used by rproc_coredump_read
> */
> + dump_state.rproc = rproc;
> + dump_state.header = data;
> + init_completion(&dump_state.dump_done);
> +
> + dev_coredumpm(&rproc->dev, NULL, &dump_state, data_size, GFP_KERNEL,
> + rproc_coredump_read, rproc_coredump_free);
> +
> + /*
> + * Wait until the dump is read and free is called. Data is freed
> + * by devcoredump framework automatically after 5 minutes.
> + */
> + wait_for_completion(&dump_state.dump_done);
> }
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index e7b7bab..38d037d 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -435,6 +435,20 @@ enum rproc_crash_type {
> };
>
> /**
> + * enum rproc_dump_mechanism - Coredump options for core
> + * @RPROC_COREDUMP_DEFAULT: Copy dump to separate buffer and carry on
> with
> + recovery
> + * @RPROC_COREDUMP_INLINE: Read segments directly from device memory.
> Stall
> + recovery until all segments are read
> + * @RPROC_COREDUMP_DISABLED: Don't perform any dump
> + */
> +enum rproc_dump_mechanism {
> + RPROC_COREDUMP_DEFAULT,
> + RPROC_COREDUMP_INLINE,
> + RPROC_COREDUMP_DISABLED,
> +};
> +
> +/**
> * struct rproc_dump_segment - segment info from ELF header
> * @node: list node related to the rproc segment list
> * @da: device address of the segment
> @@ -451,7 +465,7 @@ struct rproc_dump_segment {
>
> void *priv;
> void (*dump)(struct rproc *rproc, struct rproc_dump_segment *segment,
> - void *dest);
> + void *dest, size_t offset, size_t size);
> loff_t offset;
> };
>
> @@ -466,6 +480,7 @@ struct rproc_dump_segment {
> * @dev: virtual device for refcounting and common remoteproc behavior
> * @power: refcount of users who need this rproc powered up
> * @state: state of the device
> + * @dump_conf: Currently selected coredump configuration
> * @lock: lock which protects concurrent manipulations of the rproc
> * @dbg_dir: debugfs directory of this rproc device
> * @traces: list of trace buffers
> @@ -499,6 +514,7 @@ struct rproc {
> struct device dev;
> atomic_t power;
> unsigned int state;
> + enum rproc_dump_mechanism dump_conf;
> struct mutex lock;
> struct dentry *dbg_dir;
> struct list_head traces;
> @@ -630,7 +646,8 @@ int rproc_coredump_add_custom_segment(struct rproc
> *rproc,
> dma_addr_t da, size_t size,
> void (*dumpfn)(struct rproc *rproc,
> struct rproc_dump_segment *segment,
> - void *dest),
> + void *dest, size_t offset,
> + size_t size),
> void *priv);
> int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16
> machine);
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.
Powered by blists - more mailing lists