[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200716125831.796904-1-philippe.schenker@toradex.com>
Date: Thu, 16 Jul 2020 14:58:28 +0200
From: Philippe Schenker <philippe.schenker@...adex.com>
To: devicetree@...r.kernel.org, Shawn Guo <shawnguo@...nel.org>,
Ahmad Fatoum <a.fatoum@...gutronix.de>
Cc: Philippe Schenker <philippe.schenker@...adex.com>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [RESEND PATCH v2 0/2] Adding USB dual-role switching support for colibri-imx6/7 with extcon
Hi Shawn,
This is a friendly reminder as I think the two patches in this patchset
got forgotten to pull back in.
Ahmad pointed out that extcon is legacy and I should better use the new
gpio-usb-b-connector compatible for that purpose. You removed those two
patches upon this recommendation.
In the meantime it turned out that I cannot use the new usb-connector
way of switching usb dual-role. This is due to Chipidea driver not
supporting it and Ahmad is fine using extcon for it.
I would be glad if you could pull those two patches back in.
Thanks,
Philippe
Philippe Schenker (2):
ARM: dts: colibri-imx6: add usb dual-role switch capability
ARM: dts: colibri-imx7: add usb dual-role switch capability
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 8 ++++++++
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 2 +-
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 9 +++++++++
arch/arm/boot/dts/imx7-colibri.dtsi | 4 ++--
4 files changed, 20 insertions(+), 3 deletions(-)
--
2.27.0
Powered by blists - more mailing lists