[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200717234800.9423-4-s-anna@ti.com>
Date: Fri, 17 Jul 2020 18:47:57 -0500
From: Suman Anna <s-anna@...com>
To: Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>
CC: Lokesh Vutla <lokeshvutla@...com>,
<linux-remoteproc@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Suman Anna <s-anna@...com>
Subject: [PATCH v4 3/6] dt-bindings: remoteproc: Add common TI SCI rproc bindings
Add a bindings document that lists the common TI SCI properties
used by the K3 R5F and DSP remoteproc devices.
Signed-off-by: Suman Anna <s-anna@...com>
---
v4: Addressed both of Rob's review comments on ti,sci-proc-ids property
v3: https://patchwork.kernel.org/patch/11602317/
.../bindings/remoteproc/ti,k3-sci-proc.yaml | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-sci-proc.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-sci-proc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-sci-proc.yaml
new file mode 100644
index 000000000000..0dca2ffdbc48
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-sci-proc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,k3-sci-proc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common TI K3 remote processor device bindings
+
+maintainers:
+ - Suman Anna <s-anna@...com>
+
+description: |
+ The TI K3 family of SoCs usually have one or more remote processor sub-systems
+ like the dual-core R5F sub-system or a C66x or C71x DSP processor subsystem.
+ The device management of these remote processors is managed by a dedicated
+ System Processor, and the communication with that processor is managed through
+ the TI-SCI protocol.
+
+ Each remote processor device node should define a common set of properties
+ that allows the System Processor firmware to perform the device management
+ such as powering the IPs, asserting/deasserting the resets for each of these
+ processors.
+
+properties:
+ ti,sci:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Should be a phandle to the TI-SCI System Controller node
+
+ ti,sci-dev-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Should contain the TI-SCI device id corresponding to the remote processor
+ core. Please refer to the corresponding System Controller documentation
+ for valid values.
+
+ ti,sci-proc-ids:
+ description: Should contain a single tuple of <proc_id host_id>.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: TI-SCI processor id for the remote processor device
+ - description: TI-SCI host id to which processor control ownership
+ should be transferred to
+
+required:
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,sci-proc-ids
--
2.26.0
Powered by blists - more mailing lists