| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200717063438.175022-10-vaibhavgupta40@gmail.com>
Date: Fri, 17 Jul 2020 12:04:32 +0530
From: Vaibhav Gupta <vaibhavgupta40@...il.com>
To: Bjorn Helgaas <helgaas@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Bjorn Helgaas <bjorn@...gaas.com>,
Adam Radford <aradford@...il.com>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Adaptec OEM Raid Solutions <aacraid@...rosemi.com>,
Hannes Reinecke <hare@...e.com>,
Bradley Grove <linuxdrivers@...otech.com>,
John Garry <john.garry@...wei.com>,
Don Brace <don.brace@...rosemi.com>,
James Smart <james.smart@...adcom.com>,
Dick Kennedy <dick.kennedy@...adcom.com>,
Kashyap Desai <kashyap.desai@...adcom.com>,
Sumit Saxena <sumit.saxena@...adcom.com>,
Shivasharan S <shivasharan.srikanteshwara@...adcom.com>,
Sathya Prakash <sathya.prakash@...adcom.com>,
Sreekanth Reddy <sreekanth.reddy@...adcom.com>,
Suganath Prabu Subramani
<suganath-prabu.subramani@...adcom.com>,
Jack Wang <jinpu.wang@...ud.ionos.com>,
Vaibhav Gupta <vaibhav.varodek@...il.com>
Cc: Vaibhav Gupta <vaibhavgupta40@...il.com>,
Shuah Khan <skhan@...uxfoundation.org>,
linux-kernel@...r.kernel.org,
linux-kernel-mentees@...ts.linuxfoundation.org,
linux-scsi@...r.kernel.org, esc.storagedev@...rosemi.com,
megaraidlinux.pdl@...adcom.com, MPT-FusionLinux.pdl@...adcom.com
Subject: [PATCH v1 09/15] scsi: lpfc: use generic power management
With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.
After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.
The driver was calling pci_save/restore_state(), pci_choose_state() and
pci_set_power_state() which is no more needed.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@...il.com>
---
drivers/scsi/lpfc/lpfc_init.c | 100 +++++++++++-----------------------
1 file changed, 33 insertions(+), 67 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 6637f84a3d1b..a36309b48144 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -12452,8 +12452,7 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
/**
* lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
- * @pdev: pointer to PCI device
- * @msg: power management message
+ * @dev_d: pointer to device
*
* This routine is to be called from the kernel's PCI subsystem to support
* system Power Management (PM) to device with SLI-3 interface spec. When
@@ -12471,10 +12470,10 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
* 0 - driver suspended the device
* Error otherwise
**/
-static int
-lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
+static int __maybe_unused
+lpfc_pci_suspend_one_s3(struct device *dev_d)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct Scsi_Host *shost = dev_get_drvdata(dev_d);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
@@ -12488,16 +12487,12 @@ lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
/* Disable interrupt from device */
lpfc_sli_disable_intr(phba);
- /* Save device state to PCI config space */
- pci_save_state(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
return 0;
}
/**
* lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
- * @pdev: pointer to PCI device
+ * @dev_d: pointer to device
*
* This routine is to be called from the kernel's PCI subsystem to support
* system Power Management (PM) to device with SLI-3 interface spec. When PM
@@ -12514,10 +12509,10 @@ lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
* 0 - driver suspended the device
* Error otherwise
**/
-static int
-lpfc_pci_resume_one_s3(struct pci_dev *pdev)
+static int __maybe_unused
+lpfc_pci_resume_one_s3(struct device *dev_d)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct Scsi_Host *shost = dev_get_drvdata(dev_d);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
uint32_t intr_mode;
int error;
@@ -12525,19 +12520,6 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0452 PCI device Power Management resume.\n");
- /* Restore device state from PCI config space */
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
-
- /*
- * As the new kernel behavior of pci_restore_state() API call clears
- * device saved_state flag, need to save the restored state again.
- */
- pci_save_state(pdev);
-
- if (pdev->is_busmaster)
- pci_set_master(pdev);
-
/* Startup the kernel thread for this host adapter. */
phba->worker_thread = kthread_run(lpfc_do_work, phba,
"lpfc_worker_%d", phba->brd_no);
@@ -13294,8 +13276,7 @@ lpfc_pci_remove_one_s4(struct pci_dev *pdev)
/**
* lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
- * @pdev: pointer to PCI device
- * @msg: power management message
+ * @dev_d: pointer to device
*
* This routine is called from the kernel's PCI subsystem to support system
* Power Management (PM) to device with SLI-4 interface spec. When PM invokes
@@ -13313,10 +13294,10 @@ lpfc_pci_remove_one_s4(struct pci_dev *pdev)
* 0 - driver suspended the device
* Error otherwise
**/
-static int
-lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
+static int __maybe_unused
+lpfc_pci_suspend_one_s4(struct device *dev_d)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct Scsi_Host *shost = dev_get_drvdata(dev_d);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
@@ -13331,16 +13312,12 @@ lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
lpfc_sli4_disable_intr(phba);
lpfc_sli4_queue_destroy(phba);
- /* Save device state to PCI config space */
- pci_save_state(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
return 0;
}
/**
* lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
- * @pdev: pointer to PCI device
+ * @dev_d: pointer to device
*
* This routine is called from the kernel's PCI subsystem to support system
* Power Management (PM) to device with SLI-4 interface spac. When PM invokes
@@ -13357,10 +13334,10 @@ lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
* 0 - driver suspended the device
* Error otherwise
**/
-static int
-lpfc_pci_resume_one_s4(struct pci_dev *pdev)
+static int __maybe_unused
+lpfc_pci_resume_one_s4(struct device *dev_d)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct Scsi_Host *shost = dev_get_drvdata(dev_d);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
uint32_t intr_mode;
int error;
@@ -13368,19 +13345,6 @@ lpfc_pci_resume_one_s4(struct pci_dev *pdev)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0292 PCI device Power Management resume.\n");
- /* Restore device state from PCI config space */
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
-
- /*
- * As the new kernel behavior of pci_restore_state() API call clears
- * device saved_state flag, need to save the restored state again.
- */
- pci_save_state(pdev);
-
- if (pdev->is_busmaster)
- pci_set_master(pdev);
-
/* Startup the kernel thread for this host adapter. */
phba->worker_thread = kthread_run(lpfc_do_work, phba,
"lpfc_worker_%d", phba->brd_no);
@@ -13696,8 +13660,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
/**
* lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
- * @pdev: pointer to PCI device
- * @msg: power management message
+ * @dev: pointer to device
*
* This routine is to be registered to the kernel's PCI subsystem to support
* system Power Management (PM). When PM invokes this method, it dispatches
@@ -13708,19 +13671,19 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
* 0 - driver suspended the device
* Error otherwise
**/
-static int
-lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+static int __maybe_unused
+lpfc_pci_suspend_one(struct device *dev)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct Scsi_Host *shost = dev_get_drvdata(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
int rc = -ENODEV;
switch (phba->pci_dev_grp) {
case LPFC_PCI_DEV_LP:
- rc = lpfc_pci_suspend_one_s3(pdev, msg);
+ rc = lpfc_pci_suspend_one_s3(dev);
break;
case LPFC_PCI_DEV_OC:
- rc = lpfc_pci_suspend_one_s4(pdev, msg);
+ rc = lpfc_pci_suspend_one_s4(dev);
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -13733,7 +13696,7 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
/**
* lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
- * @pdev: pointer to PCI device
+ * @dev: pointer to device
*
* This routine is to be registered to the kernel's PCI subsystem to support
* system Power Management (PM). When PM invokes this method, it dispatches
@@ -13744,19 +13707,19 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
* 0 - driver suspended the device
* Error otherwise
**/
-static int
-lpfc_pci_resume_one(struct pci_dev *pdev)
+static int __maybe_unused
+lpfc_pci_resume_one(struct device *dev)
{
- struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct Scsi_Host *shost = dev_get_drvdata(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
int rc = -ENODEV;
switch (phba->pci_dev_grp) {
case LPFC_PCI_DEV_LP:
- rc = lpfc_pci_resume_one_s3(pdev);
+ rc = lpfc_pci_resume_one_s3(dev);
break;
case LPFC_PCI_DEV_OC:
- rc = lpfc_pci_resume_one_s4(pdev);
+ rc = lpfc_pci_resume_one_s4(dev);
break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -13936,14 +13899,17 @@ static const struct pci_error_handlers lpfc_err_handler = {
.resume = lpfc_io_resume,
};
+static SIMPLE_DEV_PM_OPS(lpfc_pci_pm_ops_one,
+ lpfc_pci_suspend_one,
+ lpfc_pci_resume_one);
+
static struct pci_driver lpfc_driver = {
.name = LPFC_DRIVER_NAME,
.id_table = lpfc_id_table,
.probe = lpfc_pci_probe_one,
.remove = lpfc_pci_remove_one,
.shutdown = lpfc_pci_remove_one,
- .suspend = lpfc_pci_suspend_one,
- .resume = lpfc_pci_resume_one,
+ .driver.pm = &lpfc_pci_pm_ops_one,
.err_handler = &lpfc_err_handler,
};
--
2.27.0
Powered by blists - more mailing lists