linux-kernel - Re: [PATCH V1] arm64: dts: qcom: SD-card GPIO pin set bias-pull up

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20200718070740.GB61202@yoga>
Date:   Sat, 18 Jul 2020 00:07:40 -0700
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Shaik Sajida Bhanu <sbhanu@...eaurora.org>
Cc:     adrian.hunter@...el.com, ulf.hansson@...aro.org,
        robh+dt@...nel.org, mka@...omium.org, linux-mmc@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, agross@...nel.org,
        Veerabhadrarao Badiganti <vbadigan@...eaurora.org>
Subject: Re: [PATCH V1] arm64: dts: qcom: SD-card GPIO pin set bias-pull up

On Fri 17 Jul 23:34 PDT 2020, Shaik Sajida Bhanu wrote:

> From: Veerabhadrarao Badiganti <vbadigan@...eaurora.org>
> 
> On some sc7180 based platforms where external pull is not present on cd-gpio,
> this gpio state is getting read as HIGH when sleep config is applied on it.
> This is resulting in SDcard rescan after suspend-resume even though SDcard
> is not present.
> 
> Update cd-gpio sleep config with bais-pull to fix this issue.
> 
> Also include xo clock to sdhc clocks list which will be used
> in calculating MCLK_FREQ field of DLL_CONFIG2 register.
> 

Please split this in two patches; one fixing the card detect bias and
one for adding the xo clock.


This needs Veerabhadrarao's signed-off-by as well (followed by yours).

Regards,
Bjorn

> Signed-off-by: Shaik Sajida Bhanu <sbhanu@...eaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index d78a066..8034fcc 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -682,8 +682,9 @@
>  			interrupt-names = "hc_irq", "pwr_irq";
>  
>  			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
> -					<&gcc GCC_SDCC1_AHB_CLK>;
> -			clock-names = "core", "iface";
> +					<&gcc GCC_SDCC1_AHB_CLK>,
> +					<&xo_board>;
> +			clock-names = "core", "iface", "xo";
>  			interconnects = <&aggre1_noc MASTER_EMMC &mc_virt SLAVE_EBI1>,
>  				<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_EMMC_CFG>;
>  			interconnect-names = "sdhc-ddr","cpu-sdhc";
> @@ -1819,7 +1820,7 @@
>  
>  				pinconf-sd-cd {
>  					pins = "gpio69";
> -					bias-disable;
> +					bias-pull-up;
>  					drive-strength = <2>;
>  				};
>  			};
> @@ -2481,8 +2482,9 @@
>  			interrupt-names = "hc_irq", "pwr_irq";
>  
>  			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
> -					<&gcc GCC_SDCC2_AHB_CLK>;
> -			clock-names = "core", "iface";
> +					<&gcc GCC_SDCC2_AHB_CLK>,
> +					<&xo_board>;
> +			clock-names = "core", "iface", "xo";
>  
>  			interconnects = <&aggre1_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
>  				<&gem_noc MASTER_APPSS_PROC &config_noc	SLAVE_SDCC_2>;
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
>