[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20200718071650.GC61202@yoga>
Date: Sat, 18 Jul 2020 00:16:50 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Shaik Sajida Bhanu <sbhanu@...eaurora.org>
Cc: adrian.hunter@...el.com, ulf.hansson@...aro.org,
robh+dt@...nel.org, mka@...omium.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, agross@...nel.org,
Pradeep P V K <ppvk@...eaurora.org>
Subject: Re: [PATCH V1] arm64: dts: qcom: Add bandwidth votes for eMMC and
SDcard
On Fri 17 Jul 23:33 PDT 2020, Shaik Sajida Bhanu wrote:
Plase add "sc7180: " between "qcom:" and "Add"
> From: Pradeep P V K <ppvk@...eaurora.org>
>
> Add the bandwidth domain supporting performance state and
> the corresponding OPP tables for the sdhc device on sc7180.
>
You need Pradeep's signed-off-by here before yours.
> Signed-off-by: Shaik Sajida Bhanu <sbhanu@...eaurora.org>
> ---
> This change is depends on the patch series
> https://lkml.org/lkml/2020/6/30/1280
> Also depends on documentation commit 557ed5f (Present on linux-next)
Afaict both of these exists in linux-next, so no need to mention them.
Would be nice to have Rajendra's ack/reviewed-by on this patch, as
you're amending his. Please Cc him.
The change itself looks good to me though.
Regards,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 68f9894..d78a066 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -684,6 +684,9 @@
> clocks = <&gcc GCC_SDCC1_APPS_CLK>,
> <&gcc GCC_SDCC1_AHB_CLK>;
> clock-names = "core", "iface";
> + interconnects = <&aggre1_noc MASTER_EMMC &mc_virt SLAVE_EBI1>,
> + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_EMMC_CFG>;
> + interconnect-names = "sdhc-ddr","cpu-sdhc";
> power-domains = <&rpmhpd SC7180_CX>;
> operating-points-v2 = <&sdhc1_opp_table>;
>
> @@ -704,11 +707,15 @@
> opp-100000000 {
> opp-hz = /bits/ 64 <100000000>;
> required-opps = <&rpmhpd_opp_low_svs>;
> + opp-peak-kBps = <100000 100000>;
> + opp-avg-kBps = <100000 50000>;
> };
>
> opp-384000000 {
> opp-hz = /bits/ 64 <384000000>;
> required-opps = <&rpmhpd_opp_svs_l1>;
> + opp-peak-kBps = <600000 900000>;
> + opp-avg-kBps = <261438 300000>;
> };
> };
> };
> @@ -2476,6 +2483,10 @@
> clocks = <&gcc GCC_SDCC2_APPS_CLK>,
> <&gcc GCC_SDCC2_AHB_CLK>;
> clock-names = "core", "iface";
> +
> + interconnects = <&aggre1_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
> + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
> + interconnect-names = "sdhc-ddr","cpu-sdhc";
> power-domains = <&rpmhpd SC7180_CX>;
> operating-points-v2 = <&sdhc2_opp_table>;
>
> @@ -2489,11 +2500,15 @@
> opp-100000000 {
> opp-hz = /bits/ 64 <100000000>;
> required-opps = <&rpmhpd_opp_low_svs>;
> + opp-peak-kBps = <160000 100000>;
> + opp-avg-kBps = <80000 50000>;
> };
>
> opp-202000000 {
> opp-hz = /bits/ 64 <202000000>;
> required-opps = <&rpmhpd_opp_svs_l1>;
> + opp-peak-kBps = <200000 120000>;
> + opp-avg-kBps = <100000 60000>;
> };
> };
> };
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
Powered by blists - more mailing lists