| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200720221958.GE1113627@xps15>
Date: Mon, 20 Jul 2020 16:19:58 -0600
From: Mathieu Poirier <mathieu.poirier@...aro.org>
To: Alexandre Bailon <abailon@...libre.com>
Cc: ohad@...ery.com, bjorn.andersson@...aro.org, robh+dt@...nel.org,
matthias.bgg@...il.com, linux-remoteproc@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/6] remoteproc: Add a remoteproc driver for the MT8183's
APU
On Mon, Jul 13, 2020 at 03:29:23PM +0200, Alexandre Bailon wrote:
> This adds a driver to control the APU present in the MT8183.
> This loads the firmware and start the DSP.
>
> Signed-off-by: Alexandre Bailon <abailon@...libre.com>
> ---
> drivers/remoteproc/Kconfig | 10 +
> drivers/remoteproc/Makefile | 1 +
> drivers/remoteproc/mtk_apu_rproc.c | 308 +++++++++++++++++++++++++++++
> 3 files changed, 319 insertions(+)
> create mode 100644 drivers/remoteproc/mtk_apu_rproc.c
>
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index c4d1731295eb..e116d4a12ac3 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -42,6 +42,16 @@ config MTK_SCP
>
> It's safe to say N here.
>
> +config MTK_APU
> + tristate "Mediatek APU remoteproc support"
> + depends on ARCH_MEDIATEK
> + depends on MTK_IOMMU
> + help
> + Say y to support the Mediatek's Accelerated Processing Unit (APU) via
> + the remote processor framework.
> +
> + It's safe to say N here.
> +
> config OMAP_REMOTEPROC
> tristate "OMAP remoteproc support"
> depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index e8b886e511f0..2ea231b75fa6 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -12,6 +12,7 @@ remoteproc-y += remoteproc_elf_loader.o
> obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o
> obj-$(CONFIG_INGENIC_VPU_RPROC) += ingenic_rproc.o
> obj-$(CONFIG_MTK_SCP) += mtk_scp.o mtk_scp_ipi.o
> +obj-$(CONFIG_MTK_APU) += mtk_apu_rproc.o
> obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
> obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o
> obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o
> diff --git a/drivers/remoteproc/mtk_apu_rproc.c b/drivers/remoteproc/mtk_apu_rproc.c
> new file mode 100644
> index 000000000000..fb416a817ef3
> --- /dev/null
> +++ b/drivers/remoteproc/mtk_apu_rproc.c
> @@ -0,0 +1,308 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 BayLibre SAS
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iommu.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/highmem.h>
> +#include <linux/module.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/platform_device.h>
> +#include <linux/remoteproc.h>
> +
> +#include "remoteproc_internal.h"
> +
> +/* From MT8183 4.5 Vision Processor Unit (VPU).pdf datasheet */
> +#define SW_RST (0x0000000C)
> +#define SW_RST_OCD_HALT_ON_RST BIT(12)
> +#define SW_RST_IPU_D_RST BIT(8)
> +#define SW_RST_IPU_B_RST BIT(4)
> +#define CORE_CTRL (0x00000110)
> +#define CORE_CTRL_PDEBUG_ENABLE BIT(31)
> +#define CORE_CTRL_SRAM_64K_iMEM (0x00 << 27)
> +#define CORE_CTRL_SRAM_96K_iMEM (0x01 << 27)
> +#define CORE_CTRL_SRAM_128K_iMEM (0x02 << 27)
> +#define CORE_CTRL_SRAM_192K_iMEM (0x03 << 27)
> +#define CORE_CTRL_SRAM_256K_iMEM (0x04 << 27)
> +#define CORE_CTRL_PBCLK_ENABLE BIT(26)
> +#define CORE_CTRL_RUN_STALL BIT(23)
> +#define CORE_CTRL_STATE_VECTOR_SELECT BIT(19)
> +#define CORE_CTRL_PIF_GATED BIT(17)
> +#define CORE_CTRL_NMI BIT(0)
> +#define CORE_XTENSA_INT (0x00000114)
> +#define CORE_CTL_XTENSA_INT (0x00000118)
> +#define CORE_DEFAULT0 (0x0000013C)
> +#define CORE_DEFAULT0_QOS_SWAP_0 (0x00 << 28)
> +#define CORE_DEFAULT0_QOS_SWAP_1 (0x01 << 28)
> +#define CORE_DEFAULT0_QOS_SWAP_2 (0x02 << 28)
> +#define CORE_DEFAULT0_QOS_SWAP_3 (0x03 << 28)
> +#define CORE_DEFAULT0_ARUSER_USE_IOMMU (0x10 << 23)
> +#define CORE_DEFAULT0_AWUSER_USE_IOMMU (0x10 << 18)
> +#define CORE_DEFAULT1 (0x00000140)
> +#define CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU (0x10 << 0)
> +#define CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU (0x10 << 5)
> +#define CORE_XTENSA_ALTRESETVEC (0x000001F8)
> +
> +struct mtk_vpu_rproc {
> + struct device *dev;
> + struct rproc *rproc;
> +
> + void __iomem *base;
> + int irq;
> + struct clk *axi;
> + struct clk *ipu;
> + struct clk *jtag;
> +};
> +
> +static u32 vpu_read32(struct mtk_vpu_rproc *vpu_rproc, u32 off)
> +{
> + return readl(vpu_rproc->base + off);
> +}
> +
> +static void vpu_write32(struct mtk_vpu_rproc *vpu_rproc, u32 off, u32 value)
> +{
> + writel(value, vpu_rproc->base + off);
> +}
> +
> +static int mtk_vpu_rproc_start(struct rproc *rproc)
> +{
> + struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
> + u32 core_ctrl;
> +
> + vpu_write32(vpu_rproc, CORE_XTENSA_ALTRESETVEC, rproc->bootaddr);
> +
> + core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
> + core_ctrl |= CORE_CTRL_PDEBUG_ENABLE | CORE_CTRL_PBCLK_ENABLE |
> + CORE_CTRL_STATE_VECTOR_SELECT | CORE_CTRL_RUN_STALL |
> + CORE_CTRL_PIF_GATED;
> + vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
> +
> + vpu_write32(vpu_rproc, SW_RST, SW_RST_OCD_HALT_ON_RST |
> + SW_RST_IPU_B_RST | SW_RST_IPU_D_RST);
> + ndelay(27);
> + vpu_write32(vpu_rproc, SW_RST, 0);
> +
> + core_ctrl &= ~CORE_CTRL_PIF_GATED;
> + vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
> +
> + vpu_write32(vpu_rproc, CORE_DEFAULT0, CORE_DEFAULT0_AWUSER_USE_IOMMU |
> + CORE_DEFAULT0_ARUSER_USE_IOMMU |
> + CORE_DEFAULT0_QOS_SWAP_1);
> + vpu_write32(vpu_rproc, CORE_DEFAULT1,
> + CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU |
> + CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU);
> +
> + core_ctrl &= ~CORE_CTRL_RUN_STALL;
> + vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
> +
> + return 0;
> +}
> +
> +static int mtk_vpu_rproc_stop(struct rproc *rproc)
> +{
> + struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
> + u32 core_ctrl;
> +
> + core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
> + vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl | CORE_CTRL_RUN_STALL);
> +
> + return 0;
> +}
> +
> +static void mtk_vpu_rproc_kick(struct rproc *rproc, int vqid)
> +{
> + struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
> +
> + vpu_write32(vpu_rproc, CORE_CTL_XTENSA_INT, 1 << vqid);
> +}
> +
> +static const struct rproc_ops mtk_vpu_rproc_ops = {
> + .start = mtk_vpu_rproc_start,
> + .stop = mtk_vpu_rproc_stop,
> + .kick = mtk_vpu_rproc_kick,
> +};
> +
> +static irqreturn_t mtk_vpu_rproc_callback(int irq, void *data)
> +{
> + struct rproc *rproc = (struct rproc *)data;
> + struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
> +
> + vpu_write32(vpu_rproc, CORE_XTENSA_INT, 1);
> +
> + return IRQ_WAKE_THREAD;
> +}
> +
> +static irqreturn_t handle_event(int irq, void *data)
> +{
> + struct rproc *rproc = (struct rproc *)data;
> +
> + rproc_vq_interrupt(rproc, 0);
> + rproc_vq_interrupt(rproc, 1);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int mtk_vpu_rproc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct mtk_vpu_rproc *vpu_rproc;
> + struct rproc *rproc;
> + struct resource *res;
> + int ret;
> +
> + rproc = rproc_alloc(dev, "apu", &mtk_vpu_rproc_ops, NULL,
> + sizeof(*vpu_rproc));
> + if (!rproc)
> + return -ENOMEM;
> +
> + rproc->recovery_disabled = true;
> + rproc->has_iommu = false;
> +
> + vpu_rproc = rproc->priv;
> + vpu_rproc->rproc = rproc;
> + vpu_rproc->dev = dev;
> +
> + platform_set_drvdata(pdev, rproc);
> +
> + rproc->domain = iommu_get_domain_for_dev(dev);
> + if (!rproc->domain) {
> + dev_err(dev, "Failed to get the IOMMU domain\n");
> + ret = -EINVAL;
> + goto free_rproc;
> + }
> +
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + vpu_rproc->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(vpu_rproc->base)) {
> + dev_err(&pdev->dev, "Failed to map mmio\n");
> + ret = PTR_ERR(vpu_rproc->base);
> + goto free_rproc;
> + }
> +
> + vpu_rproc->irq = platform_get_irq(pdev, 0);
> + if (vpu_rproc->irq < 0) {
> + ret = vpu_rproc->irq;
> + goto free_rproc;
> + }
> +
> + ret = devm_request_threaded_irq(dev, vpu_rproc->irq,
> + mtk_vpu_rproc_callback, handle_event,
> + IRQF_SHARED | IRQF_ONESHOT,
> + "mtk_vpu-remoteproc", rproc);
> + if (ret) {
> + dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
> + goto free_rproc;
> + }
> +
> + vpu_rproc->ipu = devm_clk_get(dev, "ipu");
> + if (IS_ERR(vpu_rproc->ipu)) {
> + dev_err(dev, "Failed to get ipu clock\n");
> + ret = PTR_ERR(vpu_rproc->ipu);
> + goto free_rproc;
> + }
> +
> + ret = clk_prepare_enable(vpu_rproc->ipu);
> + if (ret) {
> + dev_err(dev, "Failed to enable ipu clock\n");
> + goto free_rproc;
> + }
> +
> + vpu_rproc->axi = devm_clk_get(dev, "axi");
> + if (IS_ERR(vpu_rproc->axi)) {
> + dev_err(dev, "Failed to get axi clock\n");
> + ret = PTR_ERR(vpu_rproc->axi);
> + goto clk_disable_ipu;
> + }
> +
> + ret = clk_prepare_enable(vpu_rproc->axi);
> + if (ret) {
> + dev_err(dev, "Failed to enable axi clock\n");
> + goto clk_disable_ipu;
> + }
> +
> + vpu_rproc->jtag = devm_clk_get_optional(dev, "jtag");
> + if (IS_ERR(vpu_rproc->jtag)) {
> + dev_err(dev, "Failed to enable jtag clock\n");
> + ret = PTR_ERR(vpu_rproc->jtag);
> + goto clk_disable_axi;
> + }
> +
> + ret = clk_prepare_enable(vpu_rproc->jtag);
> + if (ret) {
> + dev_err(dev, "Failed to enable jtag clock\n");
> + goto clk_disable_axi;
> + }
I forgot... Clocks get enabled when the system is booted or the module loaded,
something that is highly inefficient. Please use rproc->prepare/unprepare() to
deal with clocks at the appropriate time.
> +
> + ret = of_reserved_mem_device_init(dev);
> + if (ret) {
> + dev_err(dev, "device does not have specific CMA pool\n");
> + goto clk_disable_jtag;
> + }
> +
> + ret = rproc_add(rproc);
> + if (ret) {
> + dev_err(dev, "rproc_add failed: %d\n", ret);
> + goto free_mem;
> + }
> +
> + return 0;
> +
> +free_mem:
> + of_reserved_mem_device_release(dev);
> +clk_disable_jtag:
> + clk_disable_unprepare(vpu_rproc->jtag);
> +clk_disable_axi:
> + clk_disable_unprepare(vpu_rproc->axi);
> +clk_disable_ipu:
> + clk_disable_unprepare(vpu_rproc->ipu);
> +free_rproc:
> + rproc_free(rproc);
> +
> + return ret;
> +}
> +
> +static int mtk_vpu_rproc_remove(struct platform_device *pdev)
> +{
> + struct rproc *rproc = platform_get_drvdata(pdev);
> + struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
> + struct device *dev = &pdev->dev;
> +
> + disable_irq(vpu_rproc->irq);
> +
> + rproc_del(rproc);
> + of_reserved_mem_device_release(dev);
> + clk_disable_unprepare(vpu_rproc->jtag);
> + clk_disable_unprepare(vpu_rproc->axi);
> + clk_disable_unprepare(vpu_rproc->ipu);
> + rproc_free(rproc);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mtk_vpu_rproc_of_match[] __maybe_unused = {
> + { .compatible = "mediatek,mt8183-apu", },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, mtk_vpu_rproc_of_match);
> +
> +static struct platform_driver mtk_vpu_rproc_driver = {
> + .probe = mtk_vpu_rproc_probe,
> + .remove = mtk_vpu_rproc_remove,
> + .driver = {
> + .name = "mtk_vpu-rproc",
> + .of_match_table = of_match_ptr(mtk_vpu_rproc_of_match),
> + },
> +};
> +module_platform_driver(mtk_vpu_rproc_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Alexandre Bailon");
> +MODULE_DESCRIPTION("Mt8183 VPU Remote Processor control driver");
> --
> 2.26.2
>
Powered by blists - more mailing lists