[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <c49384c1-2a48-7ae8-67f0-08543c41fc69@linaro.org>
Date: Mon, 20 Jul 2020 10:31:17 +0100
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Andreas Färber <afaerber@...e.de>,
linux-realtek-soc@...ts.infradead.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
James Tai [戴志峰] <james.tai@...ltek.com>,
Stanley Chang [昌育德]
<stanley_chang@...ltek.com>, Edgar Lee <cylee12@...ltek.com>
Subject: Re: [PATCH v2 18/29] nvmem: Add Realtek DHC eFuse driver
On 23/06/2020 03:50, Andreas Färber wrote:
> Implement enough of a read-only nvmem driver to easily read efuse cells.
>
> Cc: Cheng-Yu Lee <cylee12@...ltek.com>
> Signed-off-by: Andreas Färber <afaerber@...e.de>
If you are expecting this to be applied, then please resend this patch
splitting the MAINTAINER File changes separately!
--srini
> ---
> v2: New
>
> MAINTAINERS | 1 +
> drivers/nvmem/Kconfig | 9 ++++
> drivers/nvmem/Makefile | 2 +
> drivers/nvmem/rtk-dhc-efuse.c | 86 +++++++++++++++++++++++++++++++++++
> 4 files changed, 98 insertions(+)
> create mode 100644 drivers/nvmem/rtk-dhc-efuse.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1d0d6ab20451..02117fbf0e57 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2312,6 +2312,7 @@ F: Documentation/devicetree/bindings/soc/realtek/
> F: arch/arm/boot/dts/rtd*
> F: arch/arm/mach-realtek/
> F: arch/arm64/boot/dts/realtek/
> +F: drivers/nvmem/rtk-dhc-efuse.c
> F: drivers/soc/realtek/
>
> ARM/RENESAS ARM64 ARCHITECTURE
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> index d7b7f6d688e7..75cf43b16cf9 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -129,6 +129,15 @@ config NVMEM_SPMI_SDAM
> Qualcomm Technologies, Inc. PMICs. It provides the clients
> an interface to read/write to the SDAM module's shared memory.
>
> +config REALTEK_DHC_EFUSE
> + tristate "Realtek DHC eFuse Support"
> + depends on ARCH_REALTEK || COMPILE_TEST
> + depends on HAS_IOMEM
> + help
> + Say y here to enable read-only access to the Realtek Digital Home
> + This driver can also be built as a module. If so, the module
> + will be called nvmem-rtk-dhc-efuse.
> +
> config ROCKCHIP_EFUSE
> tristate "Rockchip eFuse Support"
> depends on ARCH_ROCKCHIP || COMPILE_TEST
> diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
> index a7c377218341..67cefdfa44e6 100644
> --- a/drivers/nvmem/Makefile
> +++ b/drivers/nvmem/Makefile
> @@ -33,6 +33,8 @@ obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o
> nvmem_rockchip_efuse-y := rockchip-efuse.o
> obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o
> nvmem-rockchip-otp-y := rockchip-otp.o
> +obj-$(CONFIG_REALTEK_DHC_EFUSE) += nvmem-rtk-dhc-efuse.o
> +nvmem-rtk-dhc-efuse-y := rtk-dhc-efuse.o
> obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o
> nvmem_stm32_romem-y := stm32-romem.o
> obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o
> diff --git a/drivers/nvmem/rtk-dhc-efuse.c b/drivers/nvmem/rtk-dhc-efuse.c
> new file mode 100644
> index 000000000000..4672db2c2619
> --- /dev/null
> +++ b/drivers/nvmem/rtk-dhc-efuse.c
> @@ -0,0 +1,86 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Realtek Digital Home Center eFuse
> + *
> + * Copyright (c) 2020 Andreas Färber
> + */
> +
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/nvmem-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +struct dhc_efuse {
> + struct device *dev;
> + void __iomem *base;
> + struct nvmem_device *nvmem;
> +};
> +
> +static int dhc_efuse_reg_read(void *priv, unsigned int offset, void *val,
> + size_t bytes)
> +{
> + struct dhc_efuse *efuse = priv;
> + u8 *buf = val;
> +
> + while (bytes--)
> + *buf++ = readb_relaxed(efuse->base + offset++);
> +
> + return 0;
> +}
> +
> +static int dhc_efuse_probe(struct platform_device *pdev)
> +{
> + struct dhc_efuse *efuse;
> + struct nvmem_config config = {};
> + struct resource *res;
> +
> + efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
> + if (!efuse)
> + return -ENOMEM;
> +
> + efuse->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> + if (IS_ERR(efuse->base))
> + return PTR_ERR(efuse->base);
> +
> + efuse->dev = &pdev->dev;
> +
> + config.dev = &pdev->dev;
> + config.name = "dhc-efuse";
> + config.owner = THIS_MODULE;
> + config.type = NVMEM_TYPE_OTP;
> + config.read_only = true,
> + config.word_size = 4;
> + config.stride = 1;
> + config.size = resource_size(res);
> + config.reg_read = dhc_efuse_reg_read;
> + config.priv = efuse;
> +
> + efuse->nvmem = devm_nvmem_register(&pdev->dev, &config);
> + if (IS_ERR(efuse->nvmem)) {
> + dev_err(&pdev->dev, "failed to register nvmem (%ld)\n",
> + PTR_ERR(efuse->nvmem));
> + return PTR_ERR(efuse->nvmem);
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id dhc_efuse_dt_ids[] = {
> + { .compatible = "realtek,rtd1195-efuse" },
> + { }
> +};
> +
> +static struct platform_driver dhc_efuse_driver = {
> + .probe = dhc_efuse_probe,
> + .driver = {
> + .name = "rtk-dhc-efuse",
> + .of_match_table = dhc_efuse_dt_ids,
> + },
> +};
> +module_platform_driver(dhc_efuse_driver);
> +
> +MODULE_DESCRIPTION("Realtek DHC eFuse driver");
> +MODULE_LICENSE("GPL");
>
Powered by blists - more mailing lists