| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPTRvH=ZSZBhmtW5=eXensuStYX=6s9AoqZncOZvZU8kVZXw9g@mail.gmail.com>
Date: Mon, 20 Jul 2020 11:17:56 +0800
From: Hua Dillon <dillonhua@...il.com>
To: Adrian Pop <pop.adrian61@...il.com>
Cc: Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
Rob Herring <robh+dt@...nel.org>,
Lee Jones <lee.jones@...aro.org>, devicetree@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/2] ARM: dts: stm32: Enable MIPI DSI display support.
Hi Adrian,
Adrian Pop <pop.adrian61@...il.com> 于2020年7月19日周日 下午10:54写道：
>
> Hello Hua,
>
> Thank you for your review,
>
> On Tue, Jul 14, 2020 at 6:37 AM Hua Dillon <dillonhua@...il.com> wrote:
> >
> > Hi, Adrian,
> >
> > Just one suggestion for you.
> >
> > Adrian Pop <pop.adrian61@...il.com> 于2020年7月3日周五 上午1:30写道：
> > >
> > > STM32f769-disco features a 4" MIPI DSI display: add support for it.
> > > On Cortex-M7 DMA can't use cached memory. For this reason I use a dedicated
> > > memory pool for DMA with no-cache attribute which is located at the end of
> > > RAM.
> > >
> > > Signed-off-by: Adrian Pop <pop.adrian61@...il.com>
> > > ---
> > > arch/arm/boot/dts/stm32f746.dtsi | 34 +++++++++++++++++++
> > > arch/arm/boot/dts/stm32f769-disco.dts | 49 +++++++++++++++++++++++++++
> > > 2 files changed, 83 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
> > > index 93c063796780..577a812ca01c 100644
> > > --- a/arch/arm/boot/dts/stm32f746.dtsi
> > > +++ b/arch/arm/boot/dts/stm32f746.dtsi
> > > @@ -48,6 +48,19 @@ / {
> > > #address-cells = <1>;
> > > #size-cells = <1>;
> > >
> > > + reserved-memory {
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + ranges;
> > > +
> > > + linux,dma {
> > > + compatible = "shared-dma-pool";
> > > + linux,dma-default;
> > > + no-map;
> > > + reg = <0xc0f00000 0x100000>;
> > > + };
> > > + };
> > > +
> > Christoph Hellwig was submit a patch for !CONFIG_MMU platforms to support mmap.
> > the patch is : 1fbf57d05302 dma-direct: re-enable mmap for !CONFIG_MMU
> > i thought there is no need to create a reserved-memory for it.
>
> Just tried with his patch, if I don't have the reserved-memory, I get:
>
> [drm] Initialized stm 1.0.0 20170330 for 40016800.display-controller on minor 0
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 5 at arch/arm/mm/dma-mapping-nommu.c:50 0xc000b8e9
> CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.8.0-rc1-next-20200616 #4
> Hardware name: STM32 (Device Tree Support)
> Workqueue: events 0xc0150fc1
>
> This is the reason I added the reserved memory in the first place.
>
Oh, sorry, i forget stm32f7 with cache inside. yes, you need a reserve
memory for that case.
but, "reg = <0xc0f00000 0x100000>;" should big enough for framebuffer,
as your know this is
a global reserve memory for all devices, it's might need more for
other devices, like camera etc.
or use per-device reserve memory region.
thanks.
> >
> > > clocks {
> > > clk_hse: clk-hse {
> > > #clock-cells = <0>;
> > > @@ -75,6 +88,27 @@ clk_i2s_ckin: clk-i2s-ckin {
> > > };
> > >
> > > soc {
> > > + ltdc: display-controller@...16800 {
> > > + compatible = "st,stm32-ltdc";
> > > + reg = <0x40016800 0x200>;
> > > + interrupts = <88>, <89>;
> > > + resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
> > > + clocks = <&rcc 1 CLK_LCD>;
> > > + clock-names = "lcd";
> > > + status = "disabled";
> > > + };
> > > +
> > > + dsi: dsi@...16c00 {
> > > + compatible = "st,stm32-dsi";
> > > + reg = <0x40016c00 0x800>;
> > > + interrupts = <98>;
> > > + clocks = <&rcc 1 CLK_F769_DSI>, <&clk_hse>;
> > > + clock-names = "pclk", "ref";
> > > + resets = <&rcc STM32F7_APB2_RESET(DSI)>;
> > > + reset-names = "apb";
> > > + status = "disabled";
> > > + };
> > > +
> > > timer2: timer@...00000 {
> > > compatible = "st,stm32-timer";
> > > reg = <0x40000000 0x400>;
> > > diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
> > > index 1626e00bb2cb..a9e81b49809c 100644
> > > --- a/arch/arm/boot/dts/stm32f769-disco.dts
> > > +++ b/arch/arm/boot/dts/stm32f769-disco.dts
> > > @@ -153,3 +153,52 @@ &usbotg_hs {
> > > pinctrl-names = "default";
> > > status = "okay";
> > > };
> > > +
> > > +&dsi {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + status = "okay";
> > > +
> > > + ports {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + port@0 {
> > > + reg = <0>;
> > > + dsi_in: endpoint {
> > > + remote-endpoint = <<dc_out_dsi>;
> > > + };
> > > + };
> > > +
> > > + port@1 {
> > > + reg = <1>;
> > > + dsi_out: endpoint {
> > > + remote-endpoint = <&dsi_in_panel>;
> > > + };
> > > + };
> > > +
> > > + };
> > > +
> > > + panel: panel {
> > > + compatible = "orisetech,otm8009a";
> > > + reg = <0>;
> > > + reset-gpios = <&gpioj 15 GPIO_ACTIVE_LOW>;
> > > + status = "okay";
> > > +
> > > + port {
> > > + dsi_in_panel: endpoint {
> > > + remote-endpoint = <&dsi_out>;
> > > + };
> > > + };
> > > + };
> > > +};
> > > +
> > > +<dc {
> > > + status = "okay";
> > > +
> > > + port {
> > > + ltdc_out_dsi: endpoint {
> > > + remote-endpoint = <&dsi_in>;
> > > + };
> > > + };
> > > +};
> > > --
> > > 2.27.0
> > >
> > >
> > > _______________________________________________
> > > linux-arm-kernel mailing list
> > > linux-arm-kernel@...ts.infradead.org
> > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> Regards,
> Adrian
Powered by blists - more mailing lists