| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200721204818.GB1551@shell.armlinux.org.uk>
Date: Tue, 21 Jul 2020 21:48:18 +0100
From: Russell King - ARM Linux admin <linux@...linux.org.uk>
To: Jonathan McDowell <noodles@...th.li>
Cc: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
David Miller <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Matthew Hagan <mnhagan88@...il.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH] net: dsa: qca8k: Add 802.1q VLAN support
On Tue, Jul 21, 2020 at 06:16:24PM +0100, Jonathan McDowell wrote:
> This adds full 802.1q VLAN support to the qca8k, allowing the use of
> vlan_filtering and more complicated bridging setups than allowed by
> basic port VLAN support.
>
> Tested with a number of untagged ports with separate VLANs and then a
> trunk port with all the VLANs tagged on it.
>
> Signed-off-by: Jonathan McDowell <noodles@...th.li>
>
> diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> index a5566de82853..cce05493075f 100644
> --- a/drivers/net/dsa/qca8k.c
> +++ b/drivers/net/dsa/qca8k.c
> @@ -408,6 +408,104 @@ qca8k_fdb_flush(struct qca8k_priv *priv)
> mutex_unlock(&priv->reg_mutex);
> }
>
> +static int
> +qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid)
> +{
> + u32 reg;
> +
> + /* Set the command and VLAN index */
> + reg = QCA8K_VTU_FUNC1_BUSY;
> + reg |= cmd;
> + reg |= vid << QCA8K_VTU_FUNC1_VID_S;
> +
> + /* Write the function register triggering the table access */
> + qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg);
> +
> + /* wait for completion */
> + if (qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY))
> + return -1;
You return -1 here. Personally, I don't like this in the kernel, as
convention is for functions returning "int" to return negative errno
values, and this risks returning -1 (-EPERM) being returned to userspace
if someone decides to propagate the "error code".
> +
> + /* Check for table full violation when adding an entry */
> + if (cmd == QCA8K_VLAN_LOAD) {
> + reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC1);
> + if (reg & QCA8K_VTU_FUNC1_FULL)
> + return -1;
... and here.
> + }
> +
> + return 0;
> +}
> +
> +static int
> +qca8k_vlan_add(struct qca8k_priv *priv, u8 port, u16 vid, bool tagged)
> +{
> + u32 reg;
> + int ret;
> +
> + if (!vid)
> + return -EOPNOTSUPP;
Have you checked whether this can be called with vid=0 ?
> +
> + mutex_lock(&priv->reg_mutex);
> + ret = qca8k_vlan_access(priv, QCA8K_VLAN_READ, vid);
> + if (ret >= 0) {
> + reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0);
> + reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN;
> + reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port));
> + if (tagged)
> + reg |= QCA8K_VTU_FUNC0_EG_MODE_TAG <<
> + QCA8K_VTU_FUNC0_EG_MODE_S(port);
> + else
> + reg |= QCA8K_VTU_FUNC0_EG_MODE_UNTAG <<
> + QCA8K_VTU_FUNC0_EG_MODE_S(port);
> +
> + qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
> + ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
> + }
> + mutex_unlock(&priv->reg_mutex);
> +
> + return ret;
That return -1 can get propagated out this function - a function that
also returns an -ve errno value (-EOPNOTSUPP).
> +}
> +
> +static int
> +qca8k_vlan_del(struct qca8k_priv *priv, u8 port, u16 vid)
> +{
> + u32 reg;
> + u32 mask;
> + int ret;
> + int i;
> + bool del;
> +
> + mutex_lock(&priv->reg_mutex);
> + ret = qca8k_vlan_access(priv, QCA8K_VLAN_READ, vid);
> + if (ret >= 0) {
> + reg = qca8k_read(priv, QCA8K_REG_VTU_FUNC0);
> + reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port));
> + reg |= QCA8K_VTU_FUNC0_EG_MODE_NOT <<
> + QCA8K_VTU_FUNC0_EG_MODE_S(port);
> +
> + /* Check if we're the last member to be removed */
> + del = true;
> + for (i = 0; i < QCA8K_NUM_PORTS; i++) {
> + mask = QCA8K_VTU_FUNC0_EG_MODE_NOT;
> + mask <<= QCA8K_VTU_FUNC0_EG_MODE_S(i);
> +
> + if ((reg & mask) != mask) {
> + del = false;
> + break;
> + }
> + }
> +
> + if (del) {
> + ret = qca8k_vlan_access(priv, QCA8K_VLAN_PURGE, vid);
> + } else {
> + qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
> + ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
> + }
> + }
> + mutex_unlock(&priv->reg_mutex);
> +
> + return ret;
Since qca8k_vlan_access() can return -1, so too can this function, and
the knowledge that this isn't an errno value is now two functions
deep...
> +}
> +
> static void
> qca8k_mib_init(struct qca8k_priv *priv)
> {
> @@ -663,10 +761,11 @@ qca8k_setup(struct dsa_switch *ds)
> * default egress vid
> */
> qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
> - 0xffff << shift, 1 << shift);
> + 0xffff << shift,
> + QCA8K_PORT_VID_DEF << shift);
> qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
> - QCA8K_PORT_VLAN_CVID(1) |
> - QCA8K_PORT_VLAN_SVID(1));
> + QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
> + QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
> }
> }
>
> @@ -1133,7 +1232,7 @@ qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr,
> {
> /* Set the vid to the port vlan id if no vid is set */
> if (!vid)
> - vid = 1;
> + vid = QCA8K_PORT_VID_DEF;
>
> return qca8k_fdb_add(priv, addr, port_mask, vid,
> QCA8K_ATU_STATUS_STATIC);
> @@ -1157,7 +1256,7 @@ qca8k_port_fdb_del(struct dsa_switch *ds, int port,
> u16 port_mask = BIT(port);
>
> if (!vid)
> - vid = 1;
> + vid = QCA8K_PORT_VID_DEF;
>
> return qca8k_fdb_del(priv, addr, port_mask, vid);
> }
> @@ -1186,6 +1285,71 @@ qca8k_port_fdb_dump(struct dsa_switch *ds, int port,
> return 0;
> }
>
> +static int
> +qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
> +{
> + struct qca8k_priv *priv = ds->priv;
> +
> + if (vlan_filtering) {
> + qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
> + QCA8K_PORT_LOOKUP_VLAN_MODE,
> + QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE);
> + } else {
> + qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
> + QCA8K_PORT_LOOKUP_VLAN_MODE,
> + QCA8K_PORT_LOOKUP_VLAN_MODE_NONE);
> + }
> +
> + return 0;
> +}
> +
> +static int
> +qca8k_port_vlan_prepare(struct dsa_switch *ds, int port,
> + const struct switchdev_obj_port_vlan *vlan)
> +{
> + if (!vlan->vid_begin)
> + return -EOPNOTSUPP;
> +
> + return 0;
> +}
> +
> +static void
> +qca8k_port_vlan_add(struct dsa_switch *ds, int port,
> + const struct switchdev_obj_port_vlan *vlan)
> +{
> + struct qca8k_priv *priv = ds->priv;
> + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
> + bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
> + u16 vid;
> +
> + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid)
> + qca8k_vlan_add(priv, port, vid, !untagged);
The and ignored here, so is there any point qca8k_vlan_add() returning
an error? If it fails, we'll never know... there even seems to be no
diagnostic gets logged in the kernel message log.
If you decide to add some logging, be careful how you do it - userspace
could ask for vids 1..4095 to be added, and we wouldn't want the
possibility of 4094 error messages.
Another issue may be the time taken to process 4094 VIDs if
qca8k_busy_wait() has to wait for every one.
> +
> + if (pvid) {
> + int shift = 16 * (port % 2);
> +
> + qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
> + 0xffff << shift,
> + vlan->vid_end << shift);
> + qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
> + QCA8K_PORT_VLAN_CVID(vlan->vid_end) |
> + QCA8K_PORT_VLAN_SVID(vlan->vid_end));
> + }
> +}
> +
> +static int
> +qca8k_port_vlan_del(struct dsa_switch *ds, int port,
> + const struct switchdev_obj_port_vlan *vlan)
> +{
> + struct qca8k_priv *priv = ds->priv;
> + u16 vid;
> +
> + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid)
> + qca8k_vlan_del(priv, port, vid);
Same here.
Thanks.
> +
> + return 0;
> +}
> +
> static enum dsa_tag_protocol
> qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
> enum dsa_tag_protocol mp)
> @@ -1211,6 +1375,10 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
> .port_fdb_add = qca8k_port_fdb_add,
> .port_fdb_del = qca8k_port_fdb_del,
> .port_fdb_dump = qca8k_port_fdb_dump,
> + .port_vlan_filtering = qca8k_port_vlan_filtering,
> + .port_vlan_prepare = qca8k_port_vlan_prepare,
> + .port_vlan_add = qca8k_port_vlan_add,
> + .port_vlan_del = qca8k_port_vlan_del,
> .phylink_validate = qca8k_phylink_validate,
> .phylink_mac_link_state = qca8k_phylink_mac_link_state,
> .phylink_mac_config = qca8k_phylink_mac_config,
> diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
> index 31439396401c..4e96275cbc3e 100644
> --- a/drivers/net/dsa/qca8k.h
> +++ b/drivers/net/dsa/qca8k.h
> @@ -22,6 +22,8 @@
>
> #define QCA8K_CPU_PORT 0
>
> +#define QCA8K_PORT_VID_DEF 1
> +
> /* Global control registers */
> #define QCA8K_REG_MASK_CTRL 0x000
> #define QCA8K_MASK_CTRL_ID_M 0xff
> @@ -126,6 +128,18 @@
> #define QCA8K_ATU_FUNC_FULL BIT(12)
> #define QCA8K_ATU_FUNC_PORT_M 0xf
> #define QCA8K_ATU_FUNC_PORT_S 8
> +#define QCA8K_REG_VTU_FUNC0 0x610
> +#define QCA8K_VTU_FUNC0_VALID BIT(20)
> +#define QCA8K_VTU_FUNC0_IVL_EN BIT(19)
> +#define QCA8K_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2)
> +#define QCA8K_VTU_FUNC0_EG_MODE_UNMOD 0
> +#define QCA8K_VTU_FUNC0_EG_MODE_UNTAG 1
> +#define QCA8K_VTU_FUNC0_EG_MODE_TAG 2
> +#define QCA8K_VTU_FUNC0_EG_MODE_NOT 3
> +#define QCA8K_REG_VTU_FUNC1 0x614
> +#define QCA8K_VTU_FUNC1_BUSY BIT(31)
> +#define QCA8K_VTU_FUNC1_VID_S 16
> +#define QCA8K_VTU_FUNC1_FULL BIT(4)
> #define QCA8K_REG_GLOBAL_FW_CTRL0 0x620
> #define QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN BIT(10)
> #define QCA8K_REG_GLOBAL_FW_CTRL1 0x624
> @@ -135,6 +149,11 @@
> #define QCA8K_GLOBAL_FW_CTRL1_UC_DP_S 0
> #define QCA8K_PORT_LOOKUP_CTRL(_i) (0x660 + (_i) * 0xc)
> #define QCA8K_PORT_LOOKUP_MEMBER GENMASK(6, 0)
> +#define QCA8K_PORT_LOOKUP_VLAN_MODE GENMASK(9, 8)
> +#define QCA8K_PORT_LOOKUP_VLAN_MODE_NONE (0 << 8)
> +#define QCA8K_PORT_LOOKUP_VLAN_MODE_FALLBACK (1 << 8)
> +#define QCA8K_PORT_LOOKUP_VLAN_MODE_CHECK (2 << 8)
> +#define QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE (3 << 8)
> #define QCA8K_PORT_LOOKUP_STATE_MASK GENMASK(18, 16)
> #define QCA8K_PORT_LOOKUP_STATE_DISABLED (0 << 16)
> #define QCA8K_PORT_LOOKUP_STATE_BLOCKING (1 << 16)
> @@ -178,6 +197,15 @@ enum qca8k_fdb_cmd {
> QCA8K_FDB_SEARCH = 7,
> };
>
> +enum qca8k_vlan_cmd {
> + QCA8K_VLAN_FLUSH = 1,
> + QCA8K_VLAN_LOAD = 2,
> + QCA8K_VLAN_PURGE = 3,
> + QCA8K_VLAN_REMOVE_PORT = 4,
> + QCA8K_VLAN_NEXT = 5,
> + QCA8K_VLAN_READ = 6,
> +};
> +
> struct ar8xxx_port_status {
> int enabled;
> };
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists