| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1595344835-67746-2-git-send-email-franck.lenormand@oss.nxp.com>
Date: Tue, 21 Jul 2020 17:20:31 +0200
From: franck.lenormand@....nxp.com
To: shawnguo@...nel.org, s.hauer@...gutronix.de, festevam@...il.com
Cc: franck.lenormand@....nxp.com, kernel@...gutronix.de,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-imx@....com, aisheng.dong@....com, abel.vesa@....com,
Anson.Huang@....com, linux@...pel-privat.de,
leonard.crestez@....com, daniel.baluta@....com,
qiangqing.zhang@....com, peng.fan@....com
Subject: [PATCH v2 1/5] firmware: imx: scu-seco: Add SEcure Controller APIS
From: Franck LENORMAND <franck.lenormand@....nxp.com>
This patch adds the APIs:
- imx_sc_seco_build_info: get commit and sha of SECO
- imx_sc_seco_secvio_enable: enable SNVS IRQ handling
- imx_sc_seco_secvio_config: configure SNVS register
- imx_sc_seco_secvio_dgo_config: configure SNVS DGO register
Signed-off-by: Franck LENORMAND <franck.lenormand@....nxp.com>
---
drivers/firmware/imx/Makefile | 2 +-
drivers/firmware/imx/imx-scu.c | 3 +
drivers/firmware/imx/seco.c | 275 ++++++++++++++++++++++++++++++++++
include/linux/firmware/imx/ipc.h | 1 +
include/linux/firmware/imx/sci.h | 1 +
include/linux/firmware/imx/svc/seco.h | 73 +++++++++
6 files changed, 354 insertions(+), 1 deletion(-)
create mode 100644 drivers/firmware/imx/seco.c
create mode 100644 include/linux/firmware/imx/svc/seco.h
diff --git a/drivers/firmware/imx/Makefile b/drivers/firmware/imx/Makefile
index b76acba..f23e2b0 100644
--- a/drivers/firmware/imx/Makefile
+++ b/drivers/firmware/imx/Makefile
@@ -1,4 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_IMX_DSP) += imx-dsp.o
-obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o imx-scu-irq.o rm.o imx-scu-soc.o
+obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o imx-scu-irq.o rm.o imx-scu-soc.o seco.o
obj-$(CONFIG_IMX_SCU_PD) += scu-pd.o
diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c
index dca79ca..ed7b87b 100644
--- a/drivers/firmware/imx/imx-scu.c
+++ b/drivers/firmware/imx/imx-scu.c
@@ -245,6 +245,9 @@ int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp)
(saved_func == IMX_SC_MISC_FUNC_UNIQUE_ID ||
saved_func == IMX_SC_MISC_FUNC_GET_BUTTON_STATUS))
ret = 0;
+ if (saved_svc == IMX_SC_RPC_SVC_SECO &&
+ saved_func == IMX_SC_SECO_FUNC_BUILD_INFO)
+ ret = 0;
}
out:
diff --git a/drivers/firmware/imx/seco.c b/drivers/firmware/imx/seco.c
new file mode 100644
index 0000000..9047a75
--- /dev/null
+++ b/drivers/firmware/imx/seco.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ *
+ * File containing client-side RPC functions for the SECO service. These
+ * functions are ported to clients that communicate to the SC.
+ */
+
+#include <linux/firmware/imx/sci.h>
+
+struct imx_sc_msg_seco_get_build_id {
+ struct imx_sc_rpc_msg hdr;
+ u32 version;
+ u32 commit;
+};
+
+/**
+ * imx_sc_seco_build_info() - Get version and coomit ID of the SECO
+ *
+ * @ipc: IPC handle
+ * @version: Version of the SECO
+ * @commit: Commit ID of the SECO
+ *
+ * Return:
+ * 0 - OK
+ * < 0 - error.
+ */
+int imx_sc_seco_build_info(struct imx_sc_ipc *ipc, uint32_t *version,
+ uint32_t *commit)
+{
+ int ret;
+ struct imx_sc_msg_seco_get_build_id msg = {0};
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_SECO;
+ hdr->func = IMX_SC_SECO_FUNC_BUILD_INFO;
+ hdr->size = 1;
+
+ ret = imx_scu_call_rpc(ipc, &msg, true);
+ if (ret)
+ return ret;
+
+ if (version)
+ *version = msg.version;
+ if (commit)
+ *commit = msg.commit;
+
+ return 0;
+}
+EXPORT_SYMBOL(imx_sc_seco_build_info);
+
+struct imx_sc_msg_seco_sab_msg {
+ struct imx_sc_rpc_msg hdr;
+ u32 smsg_addr_hi;
+ u32 smsg_addr_lo;
+};
+
+/**
+ * imx_sc_seco_secvio_enable() - Enable the processing of secvio IRQ from the
+ * SNVS by the SECO
+ *
+ * @ipc: IPC handle
+ *
+ * Return:
+ * 0 - OK
+ * < 0 - error.
+ */
+int imx_sc_seco_secvio_enable(struct imx_sc_ipc *ipc)
+{
+ struct imx_sc_rpc_msg msg;
+ struct imx_sc_rpc_msg *hdr = &msg;
+ int ret;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_SECO;
+ hdr->func = IMX_SC_SECO_FUNC_SECVIO_ENABLE;
+ hdr->size = 1;
+
+ ret = imx_scu_call_rpc(ipc, &msg, true);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(imx_sc_seco_secvio_enable);
+
+struct imx_sc_msg_req_seco_config {
+ struct imx_sc_rpc_msg hdr;
+ u32 data0;
+ u32 data1;
+ u32 data2;
+ u32 data3;
+ u32 data4;
+ u8 id;
+ u8 access;
+ u8 size;
+} __packed __aligned(4);
+
+struct imx_sc_msg_resp_seco_config {
+ struct imx_sc_rpc_msg hdr;
+ u32 data0;
+ u32 data1;
+ u32 data2;
+ u32 data3;
+ u32 data4;
+} __packed;
+
+/**
+ * imx_sc_seco_secvio_config() - Configure a set of SNVS registers for SECure
+ * VIOlation
+ *
+ * Some registers are extended by others registers, they configure the same
+ * kind of behavior, it constitutes a set
+ *
+ * @ipc: IPC handle
+ * @id: ID of the register, ie the offset of the first register of the set
+ * @access: Write (1) or Read (0) the registers
+ * @data0: Data for the first register
+ * @data1: Data for the second register
+ * @data2: Data for the third register
+ * @data3: Data for the fourth register
+ * @data4: Data for the fifth register
+ * @size: Number of register to configure
+ *
+ * Return:
+ * 0 - OK
+ * < 0 - error.
+ */
+int imx_sc_seco_secvio_config(struct imx_sc_ipc *ipc, u8 id, u8 access,
+ u32 *data0, u32 *data1, u32 *data2, u32 *data3,
+ u32 *data4, u8 size)
+{
+ struct imx_sc_msg_req_seco_config msg;
+ struct imx_sc_msg_resp_seco_config *resp;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+ int ret;
+
+ if (!ipc)
+ return -EINVAL;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_SECO;
+ hdr->func = IMX_SC_SECO_FUNC_SECVIO_CONFIG;
+ hdr->size = 7;
+
+ /* Check the pointers on data are valid and set it if doing a write */
+ switch (size) {
+ case 5:
+ if (!data4)
+ return -EINVAL;
+ if (access)
+ msg.data4 = *data4;
+ fallthrough;
+ case 4:
+ if (!data3)
+ return -EINVAL;
+ if (access)
+ msg.data3 = *data3;
+ fallthrough;
+ case 3:
+ if (!data2)
+ return -EINVAL;
+ if (access)
+ msg.data2 = *data2;
+ fallthrough;
+ case 2:
+ if (!data1)
+ return -EINVAL;
+ if (access)
+ msg.data1 = *data1;
+ fallthrough;
+ case 1:
+ if (!data0)
+ return -EINVAL;
+ if (access)
+ msg.data0 = *data0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ msg.id = id;
+ msg.access = access;
+ msg.size = size;
+
+ ret = imx_scu_call_rpc(ipc, &msg, true);
+ if (ret)
+ return ret;
+
+ resp = (struct imx_sc_msg_resp_seco_config *)&msg;
+
+ /* Pointers already checked so we just copy the data if reading */
+ if (!access)
+ switch (size) {
+ case 5:
+ *data4 = resp->data4;
+ fallthrough;
+ case 4:
+ *data3 = resp->data3;
+ fallthrough;
+ case 3:
+ *data2 = resp->data2;
+ fallthrough;
+ case 2:
+ *data1 = resp->data1;
+ fallthrough;
+ case 1:
+ *data0 = resp->data0;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(imx_sc_seco_secvio_config);
+
+struct imx_sc_msg_req_seco_dgo_config {
+ struct imx_sc_rpc_msg hdr;
+ u32 data;
+ u8 id;
+ u8 access;
+} __packed __aligned(4);
+
+struct imx_sc_msg_resp_seco_dgo_config {
+ struct imx_sc_rpc_msg hdr;
+ u32 data;
+} __packed;
+
+/**
+ * imx_sc_seco_secvio_enable() - Configure the DGO module
+ *
+ * @ipc: IPC handle
+ * @id: ID of the register, ie the offset of the register
+ * @access: Write (1) or Read (0) the registers
+ * @data: Data for the register
+ *
+ * Return:
+ * 0 - OK
+ * < 0 - error.
+ */
+int imx_sc_seco_secvio_dgo_config(struct imx_sc_ipc *ipc, u8 id, u8 access,
+ u32 *data)
+{
+ struct imx_sc_msg_req_seco_dgo_config msg;
+ struct imx_sc_msg_resp_seco_dgo_config *resp;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+ int ret;
+
+ if (!ipc)
+ return -EINVAL;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_SECO;
+ hdr->func = IMX_SC_SECO_FUNC_SECVIO_DGO_CONFIG;
+ hdr->size = 3;
+
+ if (!data)
+ return -EINVAL;
+ if (access)
+ msg.data = *data;
+
+ msg.access = access;
+ msg.id = id;
+
+ ret = imx_scu_call_rpc(ipc, &msg, true);
+ if (ret)
+ return ret;
+
+ resp = (struct imx_sc_msg_resp_seco_dgo_config *)&msg;
+
+ if (!access && data)
+ *data = resp->data;
+
+ return 0;
+}
+EXPORT_SYMBOL(imx_sc_seco_secvio_dgo_config);
diff --git a/include/linux/firmware/imx/ipc.h b/include/linux/firmware/imx/ipc.h
index 89105743..6924359 100644
--- a/include/linux/firmware/imx/ipc.h
+++ b/include/linux/firmware/imx/ipc.h
@@ -25,6 +25,7 @@ enum imx_sc_rpc_svc {
IMX_SC_RPC_SVC_PAD = 6,
IMX_SC_RPC_SVC_MISC = 7,
IMX_SC_RPC_SVC_IRQ = 8,
+ IMX_SC_RPC_SVC_SECO = 9,
};
struct imx_sc_rpc_msg {
diff --git a/include/linux/firmware/imx/sci.h b/include/linux/firmware/imx/sci.h
index 22c7657..914dce1 100644
--- a/include/linux/firmware/imx/sci.h
+++ b/include/linux/firmware/imx/sci.h
@@ -15,6 +15,7 @@
#include <linux/firmware/imx/svc/misc.h>
#include <linux/firmware/imx/svc/pm.h>
#include <linux/firmware/imx/svc/rm.h>
+#include <linux/firmware/imx/svc/seco.h>
int imx_scu_enable_general_irq_channel(struct device *dev);
int imx_scu_irq_register_notifier(struct notifier_block *nb);
diff --git a/include/linux/firmware/imx/svc/seco.h b/include/linux/firmware/imx/svc/seco.h
new file mode 100644
index 0000000..25450ad
--- /dev/null
+++ b/include/linux/firmware/imx/svc/seco.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2020 NXP
+ *
+ * Header file containing the public API for the System Controller (SC)
+ * Security Controller (SECO) function.
+ *
+ * SECO_SVC (SVC) Security Controller Service
+ *
+ * Module for the Security Controller (SECO) service.
+ */
+
+#ifndef _SC_SECO_API_H
+#define _SC_SECO_API_H
+
+#include <linux/errno.h>
+#include <linux/firmware/imx/sci.h>
+
+/*
+ * This type is used to indicate RPC RM function calls.
+ */
+enum imx_sc_seco_func {
+ IMX_SC_SECO_FUNC_UNKNOWN = 0,
+ IMX_SC_SECO_FUNC_BUILD_INFO = 16,
+ IMX_SC_SECO_FUNC_SECVIO_ENABLE = 25,
+ IMX_SC_SECO_FUNC_SECVIO_CONFIG = 26,
+ IMX_SC_SECO_FUNC_SECVIO_DGO_CONFIG = 27,
+};
+
+#if IS_ENABLED(CONFIG_IMX_SCU)
+int imx_sc_seco_build_info(struct imx_sc_ipc *ipc, uint32_t *version,
+ uint32_t *commit);
+
+int imx_sc_seco_secvio_enable(struct imx_sc_ipc *ipc);
+
+int imx_sc_seco_secvio_config(struct imx_sc_ipc *ipc, u8 id, u8 access,
+ u32 *data0, u32 *data1, u32 *data2, u32 *data3,
+ u32 *data4, u8 size);
+
+int imx_sc_seco_secvio_dgo_config(struct imx_sc_ipc *ipc, u8 id, u8 access,
+ u32 *data);
+
+#else /* IS_ENABLED(CONFIG_IMX_SCU) */
+static inline
+int imx_sc_seco_build_info(struct imx_sc_ipc *ipc, uint32_t *version,
+ uint32_t *commit)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline
+int imx_sc_seco_secvio_enable(struct imx_sc_ipc *ipc)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline
+int imx_sc_seco_secvio_config(struct imx_sc_ipc *ipc, u8 id, u8 access,
+ u32 *data0, u32 *data1, u32 *data2, u32 *data3,
+ u32 *data4, u8 size)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline
+int imx_sc_seco_secvio_dgo_config(struct imx_sc_ipc *ipc, u8 id, u8 access,
+ u32 *data)
+{
+ return -EOPNOTSUPP;
+}
+#endif /* IS_ENABLED(CONFIG_IMX_SCU) */
+
+#endif /* _SC_SECO_API_H */
--
2.7.4
Powered by blists - more mailing lists