Message-ID: <20200722180139.GA3700915@builder.lan>
Date:   Wed, 22 Jul 2020 11:01:39 -0700
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Mathieu Poirier <mathieu.poirier@...aro.org>
Cc:     Siddharth Gupta <sidgup@...eaurora.org>, agross@...nel.org,
        ohad@...ery.com, corbet@....net, linux-remoteproc@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, tsoni@...eaurora.org,
        psodagud@...eaurora.org, rishabhb@...eaurora.org,
        linux-doc@...r.kernel.org
Subject: Re: [PATCH v4 1/2] remoteproc: Add remoteproc character device
 interface

On Wed 22 Jul 10:18 PDT 2020, Mathieu Poirier wrote:

> On Tue, Jul 21, 2020 at 01:56:35PM -0700, Bjorn Andersson wrote:
> > On Tue 21 Jul 12:16 PDT 2020, Siddharth Gupta wrote:
> > > On 7/15/2020 2:51 PM, Mathieu Poirier wrote:
> > > > On Wed, Jul 15, 2020 at 02:18:39PM -0600, Mathieu Poirier wrote:
> > > > > On Tue, Jul 07, 2020 at 12:07:49PM -0700, Siddharth Gupta wrote:
> > [..]
> > > > > > diff --git a/drivers/remoteproc/remoteproc_cdev.c b/drivers/remoteproc/remoteproc_cdev.c
> > [..]
> > > > > > +int rproc_char_device_add(struct rproc *rproc)
> > > > > > +{
> > > > > > +	int ret;
> > > > > > +	dev_t cdevt;
> > > > > > +
> > > > > > +	cdev_init(&rproc->char_dev, &rproc_fops);
> > > > > > +	rproc->char_dev.owner = THIS_MODULE;
> > > > > > +
> > > > > > +	cdevt = MKDEV(rproc_major, rproc->index);
> > > > > > +	ret = cdev_add(&rproc->char_dev, cdevt, 1);
> > > > Trying this patchset on my side gave me the following splat[1].  After finding
> > > > the root case I can't understand how you haven't see it on your side when you
> > > > tested the feature.
> > > > 
> > > > [1]. https://pastebin.com/aYTUUCdQ
> > 
> > Mathieu, I've looked at this back and forth. Afaict this implies that
> > rproc_major is still 0. Could it be that either alloc_chrdev_region()
> > failed or somehow has yet to be called when you hit this point?
> 
> That is exacly what I thought when I first stumbled on this but instrumenting
> the code showed otherwise.
> 
> After function rproc_init_cdev() has been called @rproc_major contains the
> dynamically allocated major number in the upper 12 bits and the base minor
> number in the lower 20 bits.
> 

Ahh, alloc_chrdev_region() actually returns the dev_t, not the major.
Too bad that we all name this variable "major" to maximize the
confusion.

> In rproc_char_device_add() we find this line:
> 
>         cdevt = MKDEV(rproc_major, rproc->index);
> 
> Macro MKDEV() builds a device number by shifting @rproc_major by 20 bits to the
> left and OR'ing that with @rproc->index.  But the device's major number is
> already occupying the upper 12bits, so shifthing another 20 bits to the left
> makes the major portion of the device number '0'.  That is causing cdev_add() to
> complain bitterly.
> 
> The right way to do this is:
> 
>         cdevt = MKDEV(MAJOR(rproc_major), rproc->index);
> 

Agreed (and let's continue naming it rproc_major, in line with all other
drivers - now I know better).

Thanks,
Bjorn

> Once I found the problem I thought about 32/64 bit issues.  Since Siddharth is
> using a 64bit application processor shifting another 20 bits would still have
> yielded a non-zero value.  But that can't be since dev_t is a u32 in
> linux/types.h.
> 
> As such I can't see how it is possible to not hit that problem on a 64bit
> platform.
> 
> > 
> > > Hey Mathieu,
> > > 
> > > We aren't able to reproduce the error that you are seeing, the splat is
> > > coming
> > > from the check for whiteout device[1] - which shouldn't happen because of
> > > the
> > > find_dynamic_major call[2], right?
> > > 
> > > We are successfully seeing all our character device files and able to
> > > successfully boot remoteprocs. From what I read and understood about
> > > whiteout
> > > devices they will be hidden in the fs.
> > > 
> > > Could you provide more details about your configuration and testing?
> > > 
> > > [1]: https://github.com/torvalds/linux/blob/master/fs/char_dev.c#L486
> > > <https://github.com/torvalds/linux/blob/master/fs/char_dev.c#L123>
> > > [2]: https://github.com/torvalds/linux/blob/master/fs/char_dev.c#L123
> > > 
> > > <https://github.com/torvalds/linux/blob/master/fs/char_dev.c#L486>
> > > > > > +	if (ret < 0)
> > > > > > +		goto out;
> > > > > > +
> > > > > > +	rproc->dev.devt = cdevt;
> > > > > > +out:
> > > > > > +	return ret;
> > > > > > +}
> > > > > > +
> > > > > > +void rproc_char_device_remove(struct rproc *rproc)
> > > > > > +{
> > > > > > +	__unregister_chrdev(rproc_major, rproc->index, 1, "remoteproc");
> > > > > > +}
> > > > > > +
> > > > > > +void __init rproc_init_cdev(void)
> > > > > > +{
> > > > > > +	int ret;
> > > > > > +
> > > > > > +	ret = alloc_chrdev_region(&rproc_major, 0, NUM_RPROC_DEVICES, "remoteproc");
> > > > > > +	if (ret < 0)
> > > > > > +		pr_err("Failed to alloc rproc_cdev region, err %d\n", ret);
> > > > > > +}
> > > > > > +
> > > > > > +void __exit rproc_exit_cdev(void)
> > > > > > +{
> > > > > > +	unregister_chrdev_region(MKDEV(rproc_major, 0), NUM_RPROC_DEVICES);
> > > > > Please go back to the comment I made on this during my last review and respin.
> > > > After digging in the code while debugging the above problem, I don't see how
> > > > unregistering the chrdev region the way it is done here would have worked.
> > > Since this is compiled statically and not built as a module, we will never
> > > exercise the code path, so I will remove it in the next patchset.
> > > 
> > 
> > You're right Siddharth, since we changed CONFIG_REMOTEPROC to bool it's no longer
> > possible to hit remoteproc_exit(), so you can omit this function
> > entirely. (And we should clean up the rest of that as well)
> > 
> > [..]
> > > > > > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> > [..]
> > > > > > @@ -488,6 +489,8 @@ struct rproc_dump_segment {
> > > > > >    * @auto_boot: flag to indicate if remote processor should be auto-started
> > > > > >    * @dump_segments: list of segments in the firmware
> > > > > >    * @nb_vdev: number of vdev currently handled by rproc
> > > > > > + * @char_dev: character device of the rproc
> > > > > > + * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release
> > > > > >    */
> > > > > >   struct rproc {
> > > > > >   	struct list_head node;
> > > > > > @@ -523,6 +526,8 @@ struct rproc {
> > > > > >   	int nb_vdev;
> > > > > >   	u8 elf_class;
> > > > > >   	u16 elf_machine;
> > > > > > +	struct cdev char_dev;
> > 
> > As stated privately, I assumed based on this name that this is a struct
> > device related to that character device. So please rename this cdev to
> > save me from doing this mistake again.
> > 
> > Thanks,
> > Bjorn

Powered by blists - more mailing lists