| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1595413915-17867-13-git-send-email-rohitkr@codeaurora.org>
Date: Wed, 22 Jul 2020 16:01:55 +0530
From: Rohit kumar <rohitkr@...eaurora.org>
To: agross@...nel.org, bjorn.andersson@...aro.org, lgirdwood@...il.com,
broonie@...nel.org, robh+dt@...nel.org, plai@...eaurora.org,
bgoswami@...eaurora.org, perex@...ex.cz, tiwai@...e.com,
srinivas.kandagatla@...aro.org, linux-arm-msm@...r.kernel.org,
alsa-devel@...a-project.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Rohit kumar <rohitkr@...eaurora.org>
Subject: [PATCH v4 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format
Update lpass-cpu binding with yaml formats.
Signed-off-by: Rohit kumar <rohitkr@...eaurora.org>
---
.../devicetree/bindings/sound/qcom,lpass-cpu.txt | 130 ---------------
.../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 185 +++++++++++++++++++++
2 files changed, 185 insertions(+), 130 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
deleted file mode 100644
index c21392e..00000000
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-* Qualcomm Technologies LPASS CPU DAI
-
-This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
-
-Required properties:
-
-- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
- "qcom,lpass-cpu-sc7180"
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : A list which must include the following entries:
- * "ahbix-clk"
- * "mi2s-osr-clk"
- * "mi2s-bit-clk"
- : required clocks for "qcom,lpass-cpu-apq8016"
- * "ahbix-clk"
- * "mi2s-bit-clk0"
- * "mi2s-bit-clk1"
- * "mi2s-bit-clk2"
- * "mi2s-bit-clk3"
- * "pcnoc-mport-clk"
- * "pcnoc-sway-clk"
- : required clocks for "qcom,lpass-cpu-sc7180"
- * "audio-core"
- * "mclk0"
- * "mi2s-bit-clk0"
- * "mi2s-bit-clk1"
- * "pcnoc-sway-clk"
- * "pcnoc-mport-clk"
-
-- interrupts : Must contain an entry for each entry in
- interrupt-names.
-- interrupt-names : A list which must include the following entries:
- * "lpass-irq-lpaif"
-- pinctrl-N : One property must exist for each entry in
- pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
- for details of the property values.
-- pinctrl-names : Must contain a "default" entry.
-- reg : Must contain an address for each entry in reg-names.
-- reg-names : A list which must include the following entries:
- * "lpass-lpaif"
-- #address-cells : Must be 1
-- #size-cells : Must be 0
-
-
-
-Optional properties:
-
-- qcom,adsp : Phandle for the audio DSP node
-
-By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
-The SD lines to use can be configured by adding subnodes for each of the DAIs.
-
-Required properties for each DAI (represented by a subnode):
-- reg : Must be one of the DAI IDs
- (usually part of dt-bindings header)
-- qcom,playback-sd-lines: List of serial data lines to use for playback
- Each SD line should be represented by a number from 0-3.
-- qcom,capture-sd-lines : List of serial data lines to use for capture
- Each SD line should be represented by a number from 0-3.
-
-Note that adding a subnode changes the default to "no lines configured",
-so both playback and capture lines should be configured when a subnode is added.
-
-Examples:
-1)
-
-lpass@...00000 {
- compatible = "qcom,lpass-cpu";
- clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
- clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
- interrupts = <0 85 1>;
- interrupt-names = "lpass-irq-lpaif";
- pinctrl-names = "default", "idle";
- pinctrl-0 = <&mi2s_default>;
- pinctrl-1 = <&mi2s_idle>;
- reg = <0x28100000 0x10000>;
- reg-names = "lpass-lpaif";
- qcom,adsp = <&adsp>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* Optional to set different MI2S SD lines */
- dai@3 {
- reg = <MI2S_QUATERNARY>;
- qcom,playback-sd-lines = <0 1>;
- };
-};
-
-2)
-
-#include <dt-bindings/sound/sc7180-lpass.h>
-
-lpass_cpu: lpass {
- compatible = "qcom,lpass-cpu-sc7180";
-
- reg = <0 0x62F00000 0 0x29000>;
-
- iommus = <&apps_smmu 0x1020 0>;
-
- power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
- clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
- <&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
- <&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
- <&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
- <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
- <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
- clock-names = "pcnoc-sway-clk", "audio-core",
- "mclk0", "pcnoc-mport-clk",
- "mi2s-bit-clk0", "mi2s-bit-clk1";
- interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "lpass-irq-lpaif";
-
-
- #sound-dai-cells = <1>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- mi2s-primary@0 {
- reg = <MI2S_PRIMARY>;
- qcom,playback-sd-lines = <1>;
- qcom,capture-sd-lines = <0>;
- };
-
- mi2s-secondary@1 {
- reg = <MI2S_SECONDARY>;
- qcom,playback-sd-lines = <0>;
- };
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
new file mode 100644
index 00000000..03c598f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS CPU dai driver bindings
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
+ - Rohit kumar <rohitkr@...eaurora.org>
+
+description: |
+ Qualcomm SOC Low-Power Audio SubSystem (LPASS) that consist of MI2S interface
+ for audio data transfer on external codecs. LPASS cpu driver is a module to
+ configure Low-Power Audio Interface(LPAIF) core registers across different
+ IP versions.
+
+properties:
+ compatible:
+ oneOf:
+ - const: qcom,lpass-cpu
+ description: For IPQ806x
+
+ - const: qcom,apq8016-lpass-cpu
+ description: For APQ8016
+
+ - const: qcom,lpass-cpu-sc7180
+ description: For SC7180
+
+ reg:
+ maxItems: 1
+ description: LPAIF core registers
+
+ clocks:
+ minItems: 3
+ maxItems: 6
+
+ clock-names:
+ minItems: 3
+ maxItems: 6
+
+ interrupts:
+ maxItems: 1
+ description: LPAIF DMA buffer interrupt
+
+ qcom,adsp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle for the audio DSP node
+
+ iommus:
+ maxItems: 1
+ description: Phandle to apps_smmu node with sid mask
+
+ power-domains:
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 1
+
+patternProperties:
+ "(^mi2s-[0-9a-f]$|mi2s)":
+ type: object
+ description: Required properties for each DAI
+
+ properties:
+ reg:
+ maxItems: 1
+ description: Must be one of the DAI ID
+
+ required:
+ - reg
+
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - '#sound-dai-cells'
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,lpass-cpu-sc7180
+
+ then:
+ required:
+ - iommus
+ - power-domains
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,lpass-cpu
+
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: ahbix-clk
+ - const: mi2s-osr-clk
+ - const: mi2s-bit-clk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,apq8016-lpass-cpu
+
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: ahbix-clk
+ - const: mi2s-bit-clk0
+ - const: mi2s-bit-clk1
+ - const: mi2s-bit-clk2
+ - const: mi2s-bit-clk3
+ - const: pcnoc-mport-clk
+ - const: pcnoc-sway-clk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,lpass-cpu-sc7180
+
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: pcnoc-sway-clk
+ - const: audio-core
+ - const: mclk0
+ - const: pcnoc-mport-clk
+ - const: mi2s-bit-clk0
+ - const: mi2s-bit-clk1
+
+examples:
+ - |
+ #include <dt-bindings/sound/sc7180-lpass.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ lpass@...00000 {
+ compatible = "qcom,lpass-cpu-sc7180";
+
+ reg = <0 0x62f00000 0 0x29000>;
+
+ iommus = <&apps_smmu 0x1020 0>;
+ power-domains = <&lpass_hm 0>;
+
+ clocks = <&gcc 131>,
+ <&lpasscorecc 6>,
+ <&lpasscorecc 7>,
+ <&lpasscorecc 10>,
+ <&lpasscorecc 8>,
+ <&lpasscorecc 9>;
+
+ clock-names = "pcnoc-sway-clk", "audio-core",
+ "mclk0", "pcnoc-mport-clk",
+ "mi2s-bit-clk0", "mi2s-bit-clk1";
+
+ interrupts = <0 160 1>;
+
+ #sound-dai-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Optional to set different MI2S SD lines */
+ mi2s-primary@0 {
+ reg = <MI2S_PRIMARY>;
+ qcom,playback-sd-lines = <1>;
+ qcom,capture-sd-lines = <0>;
+ };
+ };
+ };
+
+...
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Powered by blists - more mailing lists