[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CANBLGcxZ+ps5TNzrHNHyjUZvSTrVQOHaqvB5H3tZVOow5z0aLQ@mail.gmail.com>
Date: Wed, 22 Jul 2020 14:08:43 +0200
From: Emil Renner Berthing <emil.renner.berthing@...il.com>
To: Jon Lin <jon.lin@...k-chips.com>
Cc: Mark Brown <broonie@...nel.org>, Heiko Stuebner <heiko@...ech.de>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-spi@...r.kernel.org,
"open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v2 1/3] spi: rockchip: Config spi rx dma burst size depend
on xfer length
On Wed, 22 Jul 2020 at 10:41, Jon Lin <jon.lin@...k-chips.com> wrote:
>
> The burst length can be adjusted according to the transmission
> length to improve the transmission rate
>
> Signed-off-by: Jon Lin <jon.lin@...k-chips.com>
For the whole series you can add
Reviewed-by: Emil Renner Berthing <kernel@...il.dk>
Tested-by: Emil Renner Berthing <kernel@...il.dk>
> ---
> drivers/spi/spi-rockchip.c | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
> index 9b8a5e1233c0..63593a5b87fa 100644
> --- a/drivers/spi/spi-rockchip.c
> +++ b/drivers/spi/spi-rockchip.c
> @@ -384,6 +384,19 @@ static void rockchip_spi_dma_txcb(void *data)
> spi_finalize_current_transfer(ctlr);
> }
>
> +static u32 rockchip_spi_calc_burst_size(u32 data_len)
> +{
> + u32 i;
> +
> + /* burst size: 1, 2, 4, 8 */
> + for (i = 1; i < 8; i <<= 1) {
> + if (data_len & i)
> + break;
> + }
> +
> + return i;
> +}
> +
> static int rockchip_spi_prepare_dma(struct rockchip_spi *rs,
> struct spi_controller *ctlr, struct spi_transfer *xfer)
> {
> @@ -397,7 +410,8 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs,
> .direction = DMA_DEV_TO_MEM,
> .src_addr = rs->dma_addr_rx,
> .src_addr_width = rs->n_bytes,
> - .src_maxburst = 1,
> + .src_maxburst = rockchip_spi_calc_burst_size(xfer->len /
> + rs->n_bytes),
> };
>
> dmaengine_slave_config(ctlr->dma_rx, &rxconf);
> @@ -525,7 +539,8 @@ static void rockchip_spi_config(struct rockchip_spi *rs,
> writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_RXFTLR);
>
> writel_relaxed(rs->fifo_len / 2, rs->regs + ROCKCHIP_SPI_DMATDLR);
> - writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMARDLR);
> + writel_relaxed(rockchip_spi_calc_burst_size(xfer->len / rs->n_bytes) - 1,
> + rs->regs + ROCKCHIP_SPI_DMARDLR);
> writel_relaxed(dmacr, rs->regs + ROCKCHIP_SPI_DMACR);
>
> /* the hardware only supports an even clock divisor, so
> --
> 2.17.1
>
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
Powered by blists - more mailing lists