[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1595421106-10017-2-git-send-email-qii.wang@mediatek.com>
Date: Wed, 22 Jul 2020 20:31:43 +0800
From: Qii Wang <qii.wang@...iatek.com>
To: <wsa@...-dreams.de>
CC: <robh+dt@...nel.org>, <linux-i2c@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>,
<srv_heupstream@...iatek.com>, <leilk.liu@...iatek.com>,
<qii.wang@...iatek.com>, <qiangming.xia@...iatek.com>
Subject: [PATCH 1/4] i2c: mediatek: Add apdma sync in i2c driver
With the apdma remove hand-shake signal, it need to keep i2c and
apdma in sync manually.
Signed-off-by: Qii Wang <qii.wang@...iatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index deef69e..e6b984a 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -48,6 +48,9 @@
#define I2C_DMA_CON_TX 0x0000
#define I2C_DMA_CON_RX 0x0001
+#define I2C_DMA_ASYNC_MODE 0x0004
+#define I2C_DMA_SKIP_CONFIG 0x0010
+#define I2C_DMA_DIR_CHANGE 0x0200
#define I2C_DMA_START_EN 0x0001
#define I2C_DMA_INT_FLAG_NONE 0x0000
#define I2C_DMA_CLR_FLAG 0x0000
@@ -205,6 +208,7 @@ struct mtk_i2c_compatible {
unsigned char timing_adjust: 1;
unsigned char dma_sync: 1;
unsigned char ltiming_adjust: 1;
+ unsigned char apdma_sync: 1;
};
struct mtk_i2c_ac_timing {
@@ -311,6 +315,7 @@ struct i2c_spec_values {
.timing_adjust = 1,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
};
static const struct mtk_i2c_compatible mt6577_compat = {
@@ -324,6 +329,7 @@ struct i2c_spec_values {
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
};
static const struct mtk_i2c_compatible mt6589_compat = {
@@ -337,6 +343,7 @@ struct i2c_spec_values {
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
};
static const struct mtk_i2c_compatible mt7622_compat = {
@@ -350,6 +357,7 @@ struct i2c_spec_values {
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
};
static const struct mtk_i2c_compatible mt8173_compat = {
@@ -362,6 +370,7 @@ struct i2c_spec_values {
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
};
static const struct mtk_i2c_compatible mt8183_compat = {
@@ -375,6 +384,7 @@ struct i2c_spec_values {
.timing_adjust = 1,
.dma_sync = 1,
.ltiming_adjust = 1,
+ .apdma_sync = 0,
};
static const struct of_device_id mtk_i2c_of_match[] = {
@@ -798,6 +808,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
u16 start_reg;
u16 control_reg;
u16 restart_flag = 0;
+ u16 dma_sync = 0;
u32 reg_4g_mode;
u8 *dma_rd_buf = NULL;
u8 *dma_wr_buf = NULL;
@@ -851,10 +862,16 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
mtk_i2c_writew(i2c, num, OFFSET_TRANSAC_LEN);
}
+ if (i2c->dev_comp->apdma_sync) {
+ dma_sync = I2C_DMA_SKIP_CONFIG | I2C_DMA_ASYNC_MODE;
+ if (i2c->op == I2C_MASTER_WRRD)
+ dma_sync |= I2C_DMA_DIR_CHANGE;
+ }
+
/* Prepare buffer data to start transfer */
if (i2c->op == I2C_MASTER_RD) {
writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
- writel(I2C_DMA_CON_RX, i2c->pdmabase + OFFSET_CON);
+ writel(I2C_DMA_CON_RX | dma_sync, i2c->pdmabase + OFFSET_CON);
dma_rd_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
if (!dma_rd_buf)
@@ -877,7 +894,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN);
} else if (i2c->op == I2C_MASTER_WR) {
writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
- writel(I2C_DMA_CON_TX, i2c->pdmabase + OFFSET_CON);
+ writel(I2C_DMA_CON_TX | dma_sync, i2c->pdmabase + OFFSET_CON);
dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
if (!dma_wr_buf)
@@ -900,7 +917,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
} else {
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_INT_FLAG);
- writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_CON);
+ writel(I2C_DMA_CLR_FLAG | dma_sync, i2c->pdmabase + OFFSET_CON);
dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
if (!dma_wr_buf)
--
1.9.1
Powered by blists - more mailing lists