linux-kernel - [PATCH v3] nvme/pci: Prevent SK hynix PC400 from using Write Zeroes command

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200723172910.28350-1-kai.heng.feng@canonical.com>
Date:   Fri, 24 Jul 2020 01:29:10 +0800
From:   Kai-Heng Feng <kai.heng.feng@...onical.com>
To:     kbusch@...nel.org, axboe@...com, hch@....de, sagi@...mberg.me
Cc:     Kai-Heng Feng <kai.heng.feng@...onical.com>,
        kyounghwan sohn <kyounghwan.sohn@...com>,
        linux-nvme@...ts.infradead.org (open list:NVM EXPRESS DRIVER),
        linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v3] nvme/pci: Prevent SK hynix PC400 from using Write Zeroes command

After commit 6e02318eaea5 ("nvme: add support for the Write Zeroes
command"), SK hynix PC400 becomes very slow with the following error
message:
[  224.567695] blk_update_request: operation not supported error, dev nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0 prio class 0]

SK Hynix PC400 has a buggy firmware that treats NLB as max value instead
of a range, so the NLB passed isn't a valid value to the firmware.

According to SK hynix there are three commands are affected:
- Write Zeroes
- Compare
- Write Uncorrectable

Right now only Write Zeroes is implemented, so disable it completely on
SK hynix PC400.

BugLink: https://bugs.launchpad.net/bugs/1872383
Cc: kyounghwan sohn <kyounghwan.sohn@...com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
---
v3:
- Simply disable Write Zeroes command.

v2:
- SK hynix found the root cause so change the approach accordingly.
- lspci is wrong, the device is PC400 instead of SC300.

 drivers/nvme/host/pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index b1d18f0633c7..25a187e43dbe 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3122,6 +3122,8 @@ static const struct pci_device_id nvme_id_table[] = {
 	{ PCI_DEVICE(0x1cc1, 0x8201),   /* ADATA SX8200PNP 512GB */
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS |
 				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
+	{ PCI_DEVICE(0x1c5c, 0x1504),   /* SK Hynix PC400 */
+		.driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, },
 	{ PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001),
 		.driver_data = NVME_QUIRK_SINGLE_VECTOR },
-- 
2.17.1