lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e68ff810-362a-5b99-206b-f676b204101d@linaro.org>
Date:   Thu, 23 Jul 2020 21:06:46 +0300
From:   Stanimir Varbanov <stanimir.varbanov@...aro.org>
To:     Rajendra Nayak <rnayak@...eaurora.org>,
        stanimir.varbanov@...aro.org, robh+dt@...nel.org,
        agross@...nel.org, bjorn.andersson@...aro.org
Cc:     linux-arm-msm@...r.kernel.org, linux-media@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        mka@...omium.org
Subject: Re: [PATCH v4 4/5] arm64: dts: sdm845: Add OPP tables and
 power-domains for venus

Hi Rajendra,

After applying 2,3 and 4/5 patches on linaro-integration v5.8-rc2 I see
below messages on db845:

qcom-venus aa00000.video-codec: dev_pm_opp_set_rate: failed to find
current OPP for freq 533000097 (-34)

^^^ This one is new.

qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x30000

^^^ and this message is annoying, can we make it pr_debug in rpmh?

On 7/23/20 2:26 PM, Rajendra Nayak wrote:
> Add the OPP tables in order to be able to vote on the performance state of
> a power-domain.
> 
> Signed-off-by: Rajendra Nayak <rnayak@...eaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 40 ++++++++++++++++++++++++++++++++++--
>  1 file changed, 38 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index e506793..5ca2265 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -3631,8 +3631,10 @@
>  			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>  			power-domains = <&videocc VENUS_GDSC>,
>  					<&videocc VCODEC0_GDSC>,
> -					<&videocc VCODEC1_GDSC>;
> -			power-domain-names = "venus", "vcodec0", "vcodec1";
> +					<&videocc VCODEC1_GDSC>,
> +					<&rpmhpd SDM845_CX>;
> +			power-domain-names = "venus", "vcodec0", "vcodec1", "cx";
> +			operating-points-v2 = <&venus_opp_table>;
>  			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
>  				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
>  				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
> @@ -3654,6 +3656,40 @@
>  			video-core1 {
>  				compatible = "venus-encoder";
>  			};
> +
> +			venus_opp_table: venus-opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-100000000 {
> +					opp-hz = /bits/ 64 <100000000>;
> +					required-opps = <&rpmhpd_opp_min_svs>;
> +				};
> +
> +				opp-200000000 {
> +					opp-hz = /bits/ 64 <200000000>;
> +					required-opps = <&rpmhpd_opp_low_svs>;
> +				};
> +
> +				opp-320000000 {
> +					opp-hz = /bits/ 64 <320000000>;
> +					required-opps = <&rpmhpd_opp_svs>;
> +				};
> +
> +				opp-380000000 {
> +					opp-hz = /bits/ 64 <380000000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>;
> +				};
> +
> +				opp-444000000 {
> +					opp-hz = /bits/ 64 <444000000>;
> +					required-opps = <&rpmhpd_opp_nom>;
> +				};
> +
> +				opp-533000000 {
> +					opp-hz = /bits/ 64 <533000000>;
> +					required-opps = <&rpmhpd_opp_turbo>;
> +				};
> +			};
>  		};
>  
>  		videocc: clock-controller@...0000 {
> 

-- 
regards,
Stan

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ