| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 23 Jul 2020 16:27:28 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Krishna Yarlagadda <kyarlagadda@...dia.com>,
linux-i2c@...r.kernel.org, thierry.reding@...il.com
Cc: jonathanh@...dia.com, linux-tegra@...r.kernel.org,
linux-kernel@...r.kernel.org, ldewangan@...dia.com,
smohammed@...dia.com, rgumasta@...dia.com
Subject: Re: [PATCH 4/7] i2c: tegra: add high speed mode support
23.07.2020 15:18, Krishna Yarlagadda пишет:
> From: Shardar Shariff Md <smohammed@...dia.com>
>
> Add high speed mode support
>
> Signed-off-by: Shardar Shariff Md <smohammed@...dia.com>
> Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
> Signed-off-by: Krishna Yarlagadda <kyarlagadda@...dia.com>
> ---
> drivers/i2c/busses/i2c-tegra.c | 64 ++++++++++++++++++++++++++++++++++++------
> 1 file changed, 56 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index bdbbca0..2f654ed 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -85,12 +85,14 @@
> #define PACKET_HEADER0_PROTOCOL_I2C 1
> #define PACKET_HEADER0_CONT_ID_MASK 0xF
>
> +#define I2C_HEADER_HIGHSPEED_MODE BIT(22)
> #define I2C_HEADER_CONT_ON_NAK BIT(21)
> #define I2C_HEADER_READ BIT(19)
> #define I2C_HEADER_10BIT_ADDR BIT(18)
> #define I2C_HEADER_IE_ENABLE BIT(17)
> #define I2C_HEADER_REPEAT_START BIT(16)
> #define I2C_HEADER_CONTINUE_XFER BIT(15)
> +#define I2C_HEADER_MASTER_ADDR_SHIFT 12
> #define I2C_HEADER_SLAVE_ADDR_SHIFT 1
>
> #define I2C_BUS_CLEAR_CNFG 0x084
> @@ -136,6 +138,7 @@
>
> /* configuration load timeout in microseconds */
> #define I2C_CONFIG_LOAD_TIMEOUT 1000000
> +#define I2C_HS_MODE 3500000
The I2C_MAX_HIGH_SPEED_MODE_FREQ is 3400000, what is 3500000 then?
https://elixir.bootlin.com/linux/v5.8-rc4/source/include/linux/i2c.h#L42
> /* Packet header size in bytes */
> #define I2C_PACKET_HEADER_SIZE 12
> @@ -215,12 +218,14 @@ struct tegra_i2c_hw_feature {
> int clk_divisor_std_mode;
> int clk_divisor_fast_mode;
> u16 clk_divisor_fast_plus_mode;
> + int clk_multiplier_hs_mode;
> bool has_multi_master_mode;
> bool has_slcg_override_reg;
> bool has_mst_fifo;
> const struct i2c_adapter_quirks *quirks;
> bool supports_bus_clear;
> bool has_reg_write_buffering;
> + bool has_hs_mode_support;
> bool has_apb_dma;
> u8 tlow_std_mode;
> u8 thigh_std_mode;
> @@ -293,6 +298,7 @@ struct tegra_i2c_dev {
> bool is_curr_dma_xfer;
> struct completion dma_complete;
> bool is_curr_atomic_xfer;
> + int clk_divisor_hs_mode;
> };
>
> static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
> @@ -778,8 +784,9 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
> if (i2c_dev->is_dvc)
> tegra_dvc_init(i2c_dev);
>
> - val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN |
> - FIELD_PREP(I2C_CNFG_DEBOUNCE_CNT, 2);
> + val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN;
> + if (i2c_dev->bus_clk_rate != I2C_HS_MODE)
> + val |= FIELD_PREP(I2C_CNFG_DEBOUNCE_CNT, 0x2);
>
> if (i2c_dev->hw->has_multi_master_mode)
> val |= I2C_CNFG_MULTI_MASTER_MODE;
> @@ -791,6 +798,13 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
> tegra_i2c_vi_init(i2c_dev);
>
> /* Make sure clock divisor programmed correctly */
> + if (i2c_dev->bus_clk_rate == I2C_HS_MODE) {
> + i2c_dev->clk_divisor_hs_mode = i2c_dev->hw->clk_divisor_hs_mode;
> + } else {
> + val = i2c_readl(i2c_dev, I2C_CLK_DIVISOR);
> + i2c_dev->clk_divisor_hs_mode = FIELD_PREP(I2C_CLK_DIVISOR_HSMODE, val);
FIELD_PREP?
clk_divisor_hs_mode should be a local variable and I don't think its
value needs to be read out from hardware.
> + }
> +
> clk_divisor = FIELD_PREP(I2C_CLK_DIVISOR_HSMODE,
> i2c_dev->hw->clk_divisor_hs_mode) |
> FIELD_PREP(I2C_CLK_DIVISOR_STD_FAST_MODE,
> @@ -822,8 +836,13 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
> i2c_writel(i2c_dev, tsu_thd, I2C_INTERFACE_TIMING_1);
>
> if (!clk_reinit) {
> - clk_multiplier = (tlow + thigh + 2);
> - clk_multiplier *= (i2c_dev->clk_divisor_non_hs_mode + 1);
> + if (i2c_dev->bus_clk_rate == I2C_HS_MODE) {
> + clk_multiplier = i2c_dev->hw->clk_multiplier_hs_mode;
> + clk_multiplier *= (i2c_dev->clk_divisor_hs_mode + 1);
Actually, clk_divisor_hs_mode variable shouldn't be needed at all, use
hw->clk_divisor_hs_mode directly.
> + } else {
> + clk_multiplier = (tlow + thigh + 2);
> + clk_multiplier *= (i2c_dev->clk_divisor_non_hs_mode + 1);
> + }
> err = clk_set_rate(i2c_dev->div_clk,
> i2c_dev->bus_clk_rate * clk_multiplier);
> if (err) {
> @@ -1244,6 +1263,8 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
> packet_header |= I2C_HEADER_CONT_ON_NAK;
> if (msg->flags & I2C_M_RD)
> packet_header |= I2C_HEADER_READ;
> + if (i2c_dev->bus_clk_rate == I2C_HS_MODE)
> + packet_header |= I2C_HEADER_HIGHSPEED_MODE;
> if (dma && !i2c_dev->msg_read)
> *buffer++ = packet_header;
> else
> @@ -1448,6 +1469,7 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
> .clk_divisor_std_mode = 0,
> .clk_divisor_fast_mode = 0,
> .clk_divisor_fast_plus_mode = 0,
> + .clk_multiplier_hs_mode = 12,
> .has_config_load_reg = false,
> .has_multi_master_mode = false,
> .has_slcg_override_reg = false,
> @@ -1455,6 +1477,7 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
> .quirks = &tegra_i2c_quirks,
> .supports_bus_clear = false,
> .has_reg_write_buffering = true,
> + .has_hs_mode_support = false,
> .has_apb_dma = true,
> .tlow_std_mode = 0x4,
> .thigh_std_mode = 0x2,
> @@ -1474,6 +1497,7 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
> .clk_divisor_std_mode = 0,
> .clk_divisor_fast_mode = 0,
> .clk_divisor_fast_plus_mode = 0,
> + .clk_multiplier_hs_mode = 12,
> .has_config_load_reg = false,
> .has_multi_master_mode = false,
> .has_slcg_override_reg = false,
> @@ -1481,6 +1505,7 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
> .quirks = &tegra_i2c_quirks,
> .supports_bus_clear = false,
> .has_reg_write_buffering = true,
> + .has_hs_mode_support = false,
> .has_apb_dma = true,
> .tlow_std_mode = 0x4,
> .thigh_std_mode = 0x2,
> @@ -1500,6 +1525,7 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
> .clk_divisor_std_mode = 0x19,
> .clk_divisor_fast_mode = 0x19,
> .clk_divisor_fast_plus_mode = 0x10,
> + .clk_multiplier_hs_mode = 3,
3?
> .has_config_load_reg = false,
> .has_multi_master_mode = false,
> .has_slcg_override_reg = false,
> @@ -1507,6 +1533,7 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
> .quirks = &tegra_i2c_quirks,
> .supports_bus_clear = true,
> .has_reg_write_buffering = true,
> + .has_hs_mode_support = false,
> .has_apb_dma = true,
> .tlow_std_mode = 0x4,
> .thigh_std_mode = 0x2,
> @@ -1522,10 +1549,11 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
> .has_continue_xfer_support = true,
> .has_per_pkt_xfer_complete_irq = true,
> .has_single_clk_source = true,
> - .clk_divisor_hs_mode = 1,
> + .clk_divisor_hs_mode = 2,
Why are you changing this?
...
> + if (i2c_dev->bus_clk_rate == I2C_HS_MODE &&
> + !i2c_dev->hw->has_hs_mode_support) {
> + dev_info(i2c_dev->dev, "HS mode not supported\n");
> + i2c_dev->bus_clk_rate = 100000; /* default clock rate */
I2C_MAX_STANDARD_MODE_FREQ
Powered by blists - more mailing lists