| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200724213640.389191-19-keescook@chromium.org>
Date: Fri, 24 Jul 2020 14:36:39 -0700
From: Kees Cook <keescook@...omium.org>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Kees Cook <keescook@...omium.org>,
Scott Branden <scott.branden@...adcom.com>,
Mimi Zohar <zohar@...ux.ibm.com>,
Luis Chamberlain <mcgrof@...nel.org>,
Jessica Yu <jeyu@...nel.org>, SeongJae Park <sjpark@...zon.de>,
KP Singh <kpsingh@...omium.org>, linux-efi@...r.kernel.org,
linux-security-module@...r.kernel.org,
linux-integrity@...r.kernel.org, selinux@...r.kernel.org,
linux-kselftest@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 18/19] firmware: Add request_partial_firmware_into_buf()
From: Scott Branden <scott.branden@...adcom.com>
Add request_partial_firmware_into_buf() to allow for portions of a
firmware file to be read into a buffer. This is needed when large firmware
must be loaded in portions from a file on memory constrained systems.
Signed-off-by: Scott Branden <scott.branden@...adcom.com>
Co-developed-by: Kees Cook <keescook@...omium.org>
Signed-off-by: Kees Cook <keescook@...omium.org>
---
drivers/base/firmware_loader/firmware.h | 4 +
drivers/base/firmware_loader/main.c | 109 +++++++++++++++++++-----
include/linux/firmware.h | 12 +++
3 files changed, 105 insertions(+), 20 deletions(-)
diff --git a/drivers/base/firmware_loader/firmware.h b/drivers/base/firmware_loader/firmware.h
index 7ad5fe52bc72..3f6eda46b3a2 100644
--- a/drivers/base/firmware_loader/firmware.h
+++ b/drivers/base/firmware_loader/firmware.h
@@ -32,6 +32,8 @@
* @FW_OPT_FALLBACK_PLATFORM: Enable fallback to device fw copy embedded in
* the platform's main firmware. If both this fallback and the sysfs
* fallback are enabled, then this fallback will be tried first.
+ * @FW_OPT_PARTIAL: Allow partial read of firmware instead of needing to read
+ * entire file.
*/
enum fw_opt {
FW_OPT_UEVENT = BIT(0),
@@ -41,6 +43,7 @@ enum fw_opt {
FW_OPT_NOCACHE = BIT(4),
FW_OPT_NOFALLBACK_SYSFS = BIT(5),
FW_OPT_FALLBACK_PLATFORM = BIT(6),
+ FW_OPT_PARTIAL = BIT(7),
};
enum fw_status {
@@ -68,6 +71,7 @@ struct fw_priv {
void *data;
size_t size;
size_t allocated_size;
+ size_t offset;
u32 opt_flags;
#ifdef CONFIG_FW_LOADER_PAGED_BUF
bool is_paged_buf;
diff --git a/drivers/base/firmware_loader/main.c b/drivers/base/firmware_loader/main.c
index 814a18cc51bd..7aa22bdc2f60 100644
--- a/drivers/base/firmware_loader/main.c
+++ b/drivers/base/firmware_loader/main.c
@@ -170,10 +170,19 @@ static struct fw_priv *__allocate_fw_priv(const char *fw_name,
struct firmware_cache *fwc,
void *dbuf,
size_t size,
+ size_t offset,
u32 opt_flags)
{
struct fw_priv *fw_priv;
+ /* For a partial read, the buffer must be preallocated. */
+ if ((opt_flags & FW_OPT_PARTIAL) && !dbuf)
+ return NULL;
+
+ /* Only partial reads are allowed to use an offset. */
+ if (offset != 0 && !(opt_flags & FW_OPT_PARTIAL))
+ return NULL;
+
fw_priv = kzalloc(sizeof(*fw_priv), GFP_ATOMIC);
if (!fw_priv)
return NULL;
@@ -188,6 +197,7 @@ static struct fw_priv *__allocate_fw_priv(const char *fw_name,
fw_priv->fwc = fwc;
fw_priv->data = dbuf;
fw_priv->allocated_size = size;
+ fw_priv->offset = offset;
fw_priv->opt_flags = opt_flags;
fw_state_init(fw_priv);
#ifdef CONFIG_FW_LOADER_USER_HELPER
@@ -216,12 +226,17 @@ static int alloc_lookup_fw_priv(const char *fw_name,
struct fw_priv **fw_priv,
void *dbuf,
size_t size,
+ size_t offset,
u32 opt_flags)
{
struct fw_priv *tmp;
spin_lock(&fwc->lock);
- if (!(opt_flags & FW_OPT_NOCACHE)) {
+ /*
+ * Do not merge requests that are marked to be non-cached or
+ * are performing partial reads.
+ */
+ if (!(opt_flags & (FW_OPT_NOCACHE | FW_OPT_PARTIAL))) {
tmp = __lookup_fw_priv(fw_name);
if (tmp) {
kref_get(&tmp->ref);
@@ -232,7 +247,7 @@ static int alloc_lookup_fw_priv(const char *fw_name,
}
}
- tmp = __allocate_fw_priv(fw_name, fwc, dbuf, size, opt_flags);
+ tmp = __allocate_fw_priv(fw_name, fwc, dbuf, size, offset, opt_flags);
if (tmp) {
INIT_LIST_HEAD(&tmp->list);
if (!(opt_flags & FW_OPT_NOCACHE))
@@ -439,6 +454,12 @@ static int fw_decompress_xz(struct device *dev, struct fw_priv *fw_priv,
else
return fw_decompress_xz_pages(dev, fw_priv, in_size, in_buffer);
}
+#else
+static inline int fw_decompress_xz(struct device *dev, struct fw_priv *fw_priv,
+ size_t in_size, const void *in_buffer)
+{
+ return -ENOENT;
+}
#endif /* CONFIG_FW_LOADER_COMPRESS */
/* direct firmware loading support */
@@ -485,6 +506,9 @@ fw_get_filesystem_firmware(struct device *device, struct fw_priv *fw_priv,
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(fw_path); i++) {
+ size_t file_size = 0;
+ size_t *file_size_ptr = NULL;
+
/* skip the unset customized path */
if (!fw_path[i][0])
continue;
@@ -498,9 +522,18 @@ fw_get_filesystem_firmware(struct device *device, struct fw_priv *fw_priv,
fw_priv->size = 0;
+ /*
+ * The total file size is only examined when doing a partial
+ * read; the "full read" case needs to fail if the whole
+ * firmware was not completely loaded.
+ */
+ if ((fw_priv->opt_flags & FW_OPT_PARTIAL) && buffer)
+ file_size_ptr = &file_size;
+
/* load firmware files from the mount namespace of init */
- rc = kernel_read_file_from_path_initns(path, 0, &buffer, msize,
- NULL,
+ rc = kernel_read_file_from_path_initns(path, fw_priv->offset,
+ &buffer, msize,
+ file_size_ptr,
READING_FIRMWARE);
if (rc < 0) {
if (rc != -ENOENT)
@@ -691,7 +724,7 @@ int assign_fw(struct firmware *fw, struct device *device)
static int
_request_firmware_prepare(struct firmware **firmware_p, const char *name,
struct device *device, void *dbuf, size_t size,
- u32 opt_flags)
+ size_t offset, u32 opt_flags)
{
struct firmware *firmware;
struct fw_priv *fw_priv;
@@ -710,7 +743,7 @@ _request_firmware_prepare(struct firmware **firmware_p, const char *name,
}
ret = alloc_lookup_fw_priv(name, &fw_cache, &fw_priv, dbuf, size,
- opt_flags);
+ offset, opt_flags);
/*
* bind with 'priv' now to avoid warning in failure path
@@ -757,9 +790,10 @@ static void fw_abort_batch_reqs(struct firmware *fw)
static int
_request_firmware(const struct firmware **firmware_p, const char *name,
struct device *device, void *buf, size_t size,
- u32 opt_flags)
+ size_t offset, u32 opt_flags)
{
struct firmware *fw = NULL;
+ bool nondirect = false;
int ret;
if (!firmware_p)
@@ -771,18 +805,20 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
}
ret = _request_firmware_prepare(&fw, name, device, buf, size,
- opt_flags);
+ offset, opt_flags);
if (ret <= 0) /* error or already assigned */
goto out;
ret = fw_get_filesystem_firmware(device, fw->priv, "", NULL);
-#ifdef CONFIG_FW_LOADER_COMPRESS
- if (ret == -ENOENT)
+
+ /* Only full reads can support decompression, platform, and sysfs. */
+ if (!(opt_flags & FW_OPT_PARTIAL))
+ nondirect = true;
+
+ if (ret == -ENOENT && nondirect)
ret = fw_get_filesystem_firmware(device, fw->priv, ".xz",
fw_decompress_xz);
-#endif
-
- if (ret == -ENOENT)
+ if (ret == -ENOENT && nondirect)
ret = firmware_fallback_platform(fw->priv);
if (ret) {
@@ -790,7 +826,9 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
dev_warn(device,
"Direct firmware load for %s failed with error %d\n",
name, ret);
- ret = firmware_fallback_sysfs(fw, name, device, opt_flags, ret);
+ if (nondirect)
+ ret = firmware_fallback_sysfs(fw, name, device,
+ opt_flags, ret);
} else
ret = assign_fw(fw, device);
@@ -833,7 +871,7 @@ request_firmware(const struct firmware **firmware_p, const char *name,
/* Need to pin this module until return */
__module_get(THIS_MODULE);
- ret = _request_firmware(firmware_p, name, device, NULL, 0,
+ ret = _request_firmware(firmware_p, name, device, NULL, 0, 0,
FW_OPT_UEVENT);
module_put(THIS_MODULE);
return ret;
@@ -860,7 +898,7 @@ int firmware_request_nowarn(const struct firmware **firmware, const char *name,
/* Need to pin this module until return */
__module_get(THIS_MODULE);
- ret = _request_firmware(firmware, name, device, NULL, 0,
+ ret = _request_firmware(firmware, name, device, NULL, 0, 0,
FW_OPT_UEVENT | FW_OPT_NO_WARN);
module_put(THIS_MODULE);
return ret;
@@ -884,7 +922,7 @@ int request_firmware_direct(const struct firmware **firmware_p,
int ret;
__module_get(THIS_MODULE);
- ret = _request_firmware(firmware_p, name, device, NULL, 0,
+ ret = _request_firmware(firmware_p, name, device, NULL, 0, 0,
FW_OPT_UEVENT | FW_OPT_NO_WARN |
FW_OPT_NOFALLBACK_SYSFS);
module_put(THIS_MODULE);
@@ -909,7 +947,7 @@ int firmware_request_platform(const struct firmware **firmware,
/* Need to pin this module until return */
__module_get(THIS_MODULE);
- ret = _request_firmware(firmware, name, device, NULL, 0,
+ ret = _request_firmware(firmware, name, device, NULL, 0, 0,
FW_OPT_UEVENT | FW_OPT_FALLBACK_PLATFORM);
module_put(THIS_MODULE);
return ret;
@@ -965,13 +1003,44 @@ request_firmware_into_buf(const struct firmware **firmware_p, const char *name,
return -EOPNOTSUPP;
__module_get(THIS_MODULE);
- ret = _request_firmware(firmware_p, name, device, buf, size,
+ ret = _request_firmware(firmware_p, name, device, buf, size, 0,
FW_OPT_UEVENT | FW_OPT_NOCACHE);
module_put(THIS_MODULE);
return ret;
}
EXPORT_SYMBOL(request_firmware_into_buf);
+/**
+ * request_partial_firmware_into_buf() - load partial firmware into a previously allocated buffer
+ * @firmware_p: pointer to firmware image
+ * @name: name of firmware file
+ * @device: device for which firmware is being loaded and DMA region allocated
+ * @buf: address of buffer to load firmware into
+ * @size: size of buffer
+ * @offset: offset into file to read
+ *
+ * This function works pretty much like request_firmware_into_buf except
+ * it allows a partial read of the file.
+ */
+int
+request_partial_firmware_into_buf(const struct firmware **firmware_p,
+ const char *name, struct device *device,
+ void *buf, size_t size, size_t offset)
+{
+ int ret;
+
+ if (fw_cache_is_setup(device, name))
+ return -EOPNOTSUPP;
+
+ __module_get(THIS_MODULE);
+ ret = _request_firmware(firmware_p, name, device, buf, size, offset,
+ FW_OPT_UEVENT | FW_OPT_NOCACHE |
+ FW_OPT_PARTIAL);
+ module_put(THIS_MODULE);
+ return ret;
+}
+EXPORT_SYMBOL(request_partial_firmware_into_buf);
+
/**
* release_firmware() - release the resource associated with a firmware image
* @fw: firmware resource to release
@@ -1004,7 +1073,7 @@ static void request_firmware_work_func(struct work_struct *work)
fw_work = container_of(work, struct firmware_work, work);
- _request_firmware(&fw, fw_work->name, fw_work->device, NULL, 0,
+ _request_firmware(&fw, fw_work->name, fw_work->device, NULL, 0, 0,
fw_work->opt_flags);
fw_work->cont(fw, fw_work->context);
put_device(fw_work->device); /* taken in request_firmware_nowait() */
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index cb3e2c06ed8a..c15acadc6cf4 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -53,6 +53,9 @@ int request_firmware_direct(const struct firmware **fw, const char *name,
struct device *device);
int request_firmware_into_buf(const struct firmware **firmware_p,
const char *name, struct device *device, void *buf, size_t size);
+int request_partial_firmware_into_buf(const struct firmware **firmware_p,
+ const char *name, struct device *device,
+ void *buf, size_t size, size_t offset);
void release_firmware(const struct firmware *fw);
#else
@@ -102,6 +105,15 @@ static inline int request_firmware_into_buf(const struct firmware **firmware_p,
return -EINVAL;
}
+static inline int request_partial_firmware_into_buf
+ (const struct firmware **firmware_p,
+ const char *name,
+ struct device *device,
+ void *buf, size_t size, size_t offset)
+{
+ return -EINVAL;
+}
+
#endif
int firmware_request_cache(struct device *device, const char *name);
--
2.25.1
Powered by blists - more mailing lists