| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200724071822.126758-4-anup.patel@wdc.com>
Date: Fri, 24 Jul 2020 12:48:21 +0530
From: Anup Patel <anup.patel@....com>
To: Palmer Dabbelt <palmer@...belt.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Albert Ou <aou@...s.berkeley.edu>,
Rob Herring <robh+dt@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>
Cc: Damien Le Moal <damien.lemoal@....com>,
Atish Patra <atish.patra@....com>,
Alistair Francis <Alistair.Francis@....com>,
Anup Patel <anup@...infault.org>,
linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Anup Patel <anup.patel@....com>,
Emil Renner Berhing <kernel@...il.dk>
Subject: [PATCH v6 3/4] RISC-V: Remove CLINT related code from timer and arch
Right now the RISC-V timer driver is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for
clocksource and SBI timer calls for clockevent device.
2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO
counter register for clocksource and CLINT MMIO compare register
for clockevent device.
We now have a separate CLINT timer driver which also provide CLINT
based IPI operations so let's remove CLINT MMIO related code from
arch/riscv directory and RISC-V timer driver.
Signed-off-by: Anup Patel <anup.patel@....com>
Tested-by: Emil Renner Berhing <kernel@...il.dk>
Acked-by: Daniel Lezcano <daniel.lezcano@...aro.org>
---
arch/riscv/Kconfig | 2 +-
arch/riscv/Kconfig.socs | 2 +
arch/riscv/configs/nommu_virt_defconfig | 7 +--
arch/riscv/include/asm/clint.h | 14 ------
arch/riscv/include/asm/timex.h | 28 +++--------
arch/riscv/kernel/Makefile | 2 +-
arch/riscv/kernel/clint.c | 63 -------------------------
arch/riscv/kernel/setup.c | 2 -
arch/riscv/kernel/smp.c | 1 -
arch/riscv/kernel/smpboot.c | 1 -
drivers/clocksource/Kconfig | 3 +-
drivers/clocksource/timer-riscv.c | 17 +------
12 files changed, 16 insertions(+), 126 deletions(-)
delete mode 100644 arch/riscv/include/asm/clint.h
delete mode 100644 arch/riscv/kernel/clint.c
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index fedb4a72b29a..57a72ae23d10 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -74,7 +74,7 @@ config RISCV
select PCI_DOMAINS_GENERIC if PCI
select PCI_MSI if PCI
select RISCV_INTC
- select RISCV_TIMER
+ select RISCV_TIMER if RISCV_SBI
select SPARSEMEM_STATIC if 32BIT
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 6c88148f1b9b..8a55f6156661 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -12,6 +12,7 @@ config SOC_SIFIVE
config SOC_VIRT
bool "QEMU Virt Machine"
+ select CLINT_TIMER if RISCV_M_MODE
select POWER_RESET
select POWER_RESET_SYSCON
select POWER_RESET_SYSCON_POWEROFF
@@ -24,6 +25,7 @@ config SOC_VIRT
config SOC_KENDRYTE
bool "Kendryte K210 SoC"
depends on !MMU
+ select CLINT_TIMER if RISCV_M_MODE
select SERIAL_SIFIVE if TTY
select SERIAL_SIFIVE_CONSOLE if TTY
select SIFIVE_PLIC
diff --git a/arch/riscv/configs/nommu_virt_defconfig b/arch/riscv/configs/nommu_virt_defconfig
index cf74e179bf90..cf9388184aa3 100644
--- a/arch/riscv/configs/nommu_virt_defconfig
+++ b/arch/riscv/configs/nommu_virt_defconfig
@@ -26,6 +26,7 @@ CONFIG_EXPERT=y
CONFIG_SLOB=y
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_MMU is not set
+CONFIG_SOC_VIRT=y
CONFIG_MAXPHYSMEM_2GB=y
CONFIG_SMP=y
CONFIG_CMDLINE="root=/dev/vda rw earlycon=uart8250,mmio,0x10000000,115200n8 console=ttyS0"
@@ -48,7 +49,6 @@ CONFIG_VIRTIO_BLK=y
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LDISC_AUTOLOAD is not set
-# CONFIG_DEVMEM is not set
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
@@ -56,16 +56,13 @@ CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
+# CONFIG_DEVMEM is not set
# CONFIG_HWMON is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_SIFIVE_PLIC=y
-# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_EXT2_FS=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
diff --git a/arch/riscv/include/asm/clint.h b/arch/riscv/include/asm/clint.h
deleted file mode 100644
index adaba98a7d6c..000000000000
--- a/arch/riscv/include/asm/clint.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_RISCV_CLINT_H
-#define _ASM_RISCV_CLINT_H 1
-
-#include <linux/io.h>
-#include <linux/smp.h>
-
-#ifdef CONFIG_RISCV_M_MODE
-void clint_init_boot_cpu(void);
-#else /* CONFIG_RISCV_M_MODE */
-#define clint_init_boot_cpu() do { } while (0)
-#endif /* CONFIG_RISCV_M_MODE */
-
-#endif /* _ASM_RISCV_CLINT_H */
diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
index bad2a7c2cda5..a3fb85d505d4 100644
--- a/arch/riscv/include/asm/timex.h
+++ b/arch/riscv/include/asm/timex.h
@@ -7,41 +7,27 @@
#define _ASM_RISCV_TIMEX_H
#include <asm/csr.h>
-#include <asm/mmio.h>
typedef unsigned long cycles_t;
-extern u64 __iomem *riscv_time_val;
-extern u64 __iomem *riscv_time_cmp;
-
-#ifdef CONFIG_64BIT
-#define mmio_get_cycles() readq_relaxed(riscv_time_val)
-#else
-#define mmio_get_cycles() readl_relaxed(riscv_time_val)
-#define mmio_get_cycles_hi() readl_relaxed(((u32 *)riscv_time_val) + 1)
-#endif
-
static inline cycles_t get_cycles(void)
{
- if (IS_ENABLED(CONFIG_RISCV_SBI))
- return csr_read(CSR_TIME);
- return mmio_get_cycles();
+ return csr_read(CSR_TIME);
}
#define get_cycles get_cycles
+static inline u32 get_cycles_hi(void)
+{
+ return csr_read(CSR_TIMEH);
+}
+#define get_cycles_hi get_cycles_hi
+
#ifdef CONFIG_64BIT
static inline u64 get_cycles64(void)
{
return get_cycles();
}
#else /* CONFIG_64BIT */
-static inline u32 get_cycles_hi(void)
-{
- if (IS_ENABLED(CONFIG_RISCV_SBI))
- return csr_read(CSR_TIMEH);
- return mmio_get_cycles_hi();
-}
-
static inline u64 get_cycles64(void)
{
u32 hi, lo;
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index b355cf485671..7edf15643146 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -31,7 +31,7 @@ obj-y += cacheinfo.o
obj-y += patch.o
obj-$(CONFIG_MMU) += vdso.o vdso/
-obj-$(CONFIG_RISCV_M_MODE) += clint.o traps_misaligned.o
+obj-$(CONFIG_RISCV_M_MODE) += traps_misaligned.o
obj-$(CONFIG_FPU) += fpu.o
obj-$(CONFIG_SMP) += smpboot.o
obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/riscv/kernel/clint.c b/arch/riscv/kernel/clint.c
deleted file mode 100644
index a9845ee023e2..000000000000
--- a/arch/riscv/kernel/clint.c
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019 Christoph Hellwig.
- */
-
-#include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/smp.h>
-#include <linux/types.h>
-#include <asm/clint.h>
-#include <asm/csr.h>
-#include <asm/timex.h>
-
-/*
- * This is the layout used by the SiFive clint, which is also shared by the qemu
- * virt platform, and the Kendryte KD210 at least.
- */
-#define CLINT_IPI_OFF 0
-#define CLINT_TIME_CMP_OFF 0x4000
-#define CLINT_TIME_VAL_OFF 0xbff8
-
-u32 __iomem *clint_ipi_base;
-
-static void clint_send_ipi(const struct cpumask *target)
-{
- unsigned int cpu;
-
- for_each_cpu(cpu, target)
- writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu));
-}
-
-static void clint_clear_ipi(void)
-{
- writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id()));
-}
-
-static struct riscv_ipi_ops clint_ipi_ops = {
- .ipi_inject = clint_send_ipi,
- .ipi_clear = clint_clear_ipi,
-};
-
-void clint_init_boot_cpu(void)
-{
- struct device_node *np;
- void __iomem *base;
-
- np = of_find_compatible_node(NULL, NULL, "riscv,clint0");
- if (!np) {
- panic("clint not found");
- return;
- }
-
- base = of_iomap(np, 0);
- if (!base)
- panic("could not map CLINT");
-
- clint_ipi_base = base + CLINT_IPI_OFF;
- riscv_time_cmp = base + CLINT_TIME_CMP_OFF;
- riscv_time_val = base + CLINT_TIME_VAL_OFF;
-
- clint_clear_ipi();
- riscv_set_ipi_ops(&clint_ipi_ops);
-}
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index f04373be54a6..2c6dd329312b 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -18,7 +18,6 @@
#include <linux/swiotlb.h>
#include <linux/smp.h>
-#include <asm/clint.h>
#include <asm/cpu_ops.h>
#include <asm/setup.h>
#include <asm/sections.h>
@@ -79,7 +78,6 @@ void __init setup_arch(char **cmdline_p)
#else
unflatten_device_tree();
#endif
- clint_init_boot_cpu();
#ifdef CONFIG_SWIOTLB
swiotlb_init(1);
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 8b85683ce203..07626be78c23 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -17,7 +17,6 @@
#include <linux/seq_file.h>
#include <linux/delay.h>
-#include <asm/clint.h>
#include <asm/sbi.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 5fe849791bf0..a6cfa9842d4b 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -24,7 +24,6 @@
#include <linux/of.h>
#include <linux/sched/task_stack.h>
#include <linux/sched/mm.h>
-#include <asm/clint.h>
#include <asm/cpu_ops.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 41f1c147c178..b24449da3022 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -648,9 +648,8 @@ config ATCPIT100_TIMER
This option enables support for the Andestech ATCPIT100 timers.
config RISCV_TIMER
- bool "Timer for the RISC-V platform"
+ bool "Timer for the RISC-V platform" if COMPILE_TEST
depends on GENERIC_SCHED_CLOCK && RISCV
- default y
select TIMER_PROBE
select TIMER_OF
help
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index 9de1dabfb126..c51c5ed15aa7 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -19,26 +19,13 @@
#include <linux/of_irq.h>
#include <asm/smp.h>
#include <asm/sbi.h>
-
-u64 __iomem *riscv_time_cmp;
-u64 __iomem *riscv_time_val;
-
-static inline void mmio_set_timer(u64 val)
-{
- void __iomem *r;
-
- r = riscv_time_cmp + cpuid_to_hartid_map(smp_processor_id());
- writeq_relaxed(val, r);
-}
+#include <asm/timex.h>
static int riscv_clock_next_event(unsigned long delta,
struct clock_event_device *ce)
{
csr_set(CSR_IE, IE_TIE);
- if (IS_ENABLED(CONFIG_RISCV_SBI))
- sbi_set_timer(get_cycles64() + delta);
- else
- mmio_set_timer(get_cycles64() + delta);
+ sbi_set_timer(get_cycles64() + delta);
return 0;
}
--
2.25.1
Powered by blists - more mailing lists