[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200724074038.5597-14-krzk@kernel.org>
Date: Fri, 24 Jul 2020 09:40:22 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
Markus Mayer <mmayer@...adcom.com>,
bcm-kernel-feedback-list@...adcom.com,
Florian Fainelli <f.fainelli@...il.com>,
Santosh Shilimkar <ssantosh@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Roger Quadros <rogerq@...com>,
Tony Lindgren <tony@...mide.com>,
Vladimir Zapolskiy <vz@...ia.com>,
Kukjin Kim <kgene@...nel.org>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-omap@...r.kernel.org,
linux-samsung-soc@...r.kernel.org, linux-tegra@...r.kernel.org
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH v2 13/29] memory: emif: Fix whitespace coding style violations
Make the code and printed messages slightly more readable. Fixes
checkpatch warnings:
WARNING: quoted string split across lines
ERROR: space prohibited before that ',' (ctx:WxW)
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
drivers/memory/emif.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 97bad1588bba..1241a87081f8 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -284,8 +284,7 @@ static void set_lpmode(struct emif_data *emif, u8 lpmode)
if ((emif->plat_data->ip_rev == EMIF_4D) &&
(lpmode == EMIF_LP_MODE_PWR_DN)) {
WARN_ONCE(1,
- "REG_LP_MODE = LP_MODE_PWR_DN(4) is prohibited by"
- "erratum i743 switch to LP_MODE_SELF_REFRESH(2)\n");
+ "REG_LP_MODE = LP_MODE_PWR_DN(4) is prohibited by erratum i743 switch to LP_MODE_SELF_REFRESH(2)\n");
/* rollback LP_MODE to Self-refresh mode */
lpmode = EMIF_LP_MODE_SELF_REFRESH;
}
@@ -714,7 +713,7 @@ static u32 get_ext_phy_ctrl_2_intelliphy_4d5(void)
u32 fifo_we_slave_ratio;
fifo_we_slave_ratio = DIV_ROUND_CLOSEST(
- EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
+ EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256, t_ck);
return fifo_we_slave_ratio | fifo_we_slave_ratio << 11 |
fifo_we_slave_ratio << 22;
@@ -725,7 +724,7 @@ static u32 get_ext_phy_ctrl_3_intelliphy_4d5(void)
u32 fifo_we_slave_ratio;
fifo_we_slave_ratio = DIV_ROUND_CLOSEST(
- EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
+ EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256, t_ck);
return fifo_we_slave_ratio >> 10 | fifo_we_slave_ratio << 1 |
fifo_we_slave_ratio << 12 | fifo_we_slave_ratio << 23;
@@ -736,7 +735,7 @@ static u32 get_ext_phy_ctrl_4_intelliphy_4d5(void)
u32 fifo_we_slave_ratio;
fifo_we_slave_ratio = DIV_ROUND_CLOSEST(
- EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
+ EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256, t_ck);
return fifo_we_slave_ratio >> 9 | fifo_we_slave_ratio << 2 |
fifo_we_slave_ratio << 13;
@@ -975,8 +974,7 @@ static irqreturn_t handle_temp_alert(void __iomem *base, struct emif_data *emif)
EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART)) {
if (emif->temperature_level >= SDRAM_TEMP_HIGH_DERATE_REFRESH) {
dev_err(emif->dev,
- "%s:NOT Extended temperature capable memory."
- "Converting MR4=0x%02x as shutdown event\n",
+ "%s:NOT Extended temperature capable memory. Converting MR4=0x%02x as shutdown event\n",
__func__, emif->temperature_level);
/*
* Temperature far too high - do kernel_power_off()
@@ -1318,9 +1316,9 @@ static void __init_or_module of_get_ddr_info(struct device_node *np_emif,
if (of_find_property(np_emif, "cal-resistor-per-cs", &len))
dev_info->cal_resistors_per_cs = true;
- if (of_device_is_compatible(np_ddr , "jedec,lpddr2-s4"))
+ if (of_device_is_compatible(np_ddr, "jedec,lpddr2-s4"))
dev_info->type = DDR_TYPE_LPDDR2_S4;
- else if (of_device_is_compatible(np_ddr , "jedec,lpddr2-s2"))
+ else if (of_device_is_compatible(np_ddr, "jedec,lpddr2-s2"))
dev_info->type = DDR_TYPE_LPDDR2_S2;
of_property_read_u32(np_ddr, "density", &density);
--
2.17.1
Powered by blists - more mailing lists