| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200724104711.5474-2-amelie.delaunay@st.com>
Date: Fri, 24 Jul 2020 12:47:09 +0200
From: Amelie Delaunay <amelie.delaunay@...com>
To: Minas Harutyunyan <hminas@...opsys.com>,
Felipe Balbi <balbi@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>
CC: <linux-usb@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Fabrice Gasnier <fabrice.gasnier@...com>,
Amelie Delaunay <amelie.delaunay@...com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH v3 1/3] usb: dwc2: override PHY input signals with usb role switch support
This patch adds support for usb role switch to dwc2, by using overriding
control of the PHY voltage valid and ID input signals.
iddig signal (ID) can be overridden:
- when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1;
- when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0.
avalid/bvalid/vbusvalid signals can be overridden respectively with:
- GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL
- GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL
- GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL
It is possible to determine valid sessions thanks to usb role switch:
- if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid
- if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid
- if USB_ROLE_HOST then avalid && !bvalid && vbusvalid
Cc: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@...com>
---
Changes in v3:
- Fix build issue reported by kernel test robot in drd.c
Changes in v2:
- Fix build issue reported by kernel test robot
- Move call to dwc2_force_mode outside spinlock context
- Add dwc2_drd_exit call in probe error path
---
drivers/usb/dwc2/Kconfig | 1 +
drivers/usb/dwc2/Makefile | 2 +-
drivers/usb/dwc2/core.h | 9 ++
drivers/usb/dwc2/drd.c | 181 ++++++++++++++++++++++++++++++++++++
drivers/usb/dwc2/gadget.c | 2 +-
drivers/usb/dwc2/platform.c | 15 +++
6 files changed, 208 insertions(+), 2 deletions(-)
create mode 100644 drivers/usb/dwc2/drd.c
diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
index 16e1aa304edc..dceb8f32414e 100644
--- a/drivers/usb/dwc2/Kconfig
+++ b/drivers/usb/dwc2/Kconfig
@@ -47,6 +47,7 @@ config USB_DWC2_PERIPHERAL
config USB_DWC2_DUAL_ROLE
bool "Dual Role mode"
depends on (USB=y && USB_GADGET=y) || (USB_DWC2=m && USB && USB_GADGET)
+ select USB_ROLE_SWITCH
help
Select this option if you want the driver to work in a dual-role
mode. In this mode both host and gadget features are enabled, and
diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile
index 440320cc20a4..2bcd6945df46 100644
--- a/drivers/usb/dwc2/Makefile
+++ b/drivers/usb/dwc2/Makefile
@@ -3,7 +3,7 @@ ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG
ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG
obj-$(CONFIG_USB_DWC2) += dwc2.o
-dwc2-y := core.o core_intr.o platform.o
+dwc2-y := core.o core_intr.o platform.o drd.o
dwc2-y += params.o
ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 132d687f1590..471564e120c8 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -860,6 +860,7 @@ struct dwc2_hregs_backup {
* - USB_DR_MODE_PERIPHERAL
* - USB_DR_MODE_HOST
* - USB_DR_MODE_OTG
+ * @role_sw: usb_role_switch handle
* @hcd_enabled: Host mode sub-driver initialization indicator.
* @gadget_enabled: Peripheral mode sub-driver initialization indicator.
* @ll_hw_enabled: Status of low-level hardware resources.
@@ -1054,6 +1055,7 @@ struct dwc2_hsotg {
struct dwc2_core_params params;
enum usb_otg_state op_state;
enum usb_dr_mode dr_mode;
+ struct usb_role_switch *role_sw;
unsigned int hcd_enabled:1;
unsigned int gadget_enabled:1;
unsigned int ll_hw_enabled:1;
@@ -1376,6 +1378,11 @@ static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
return (dwc2_readl(hsotg, GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
}
+int dwc2_drd_init(struct dwc2_hsotg *hsotg);
+void dwc2_drd_suspend(struct dwc2_hsotg *hsotg);
+void dwc2_drd_resume(struct dwc2_hsotg *hsotg);
+void dwc2_drd_exit(struct dwc2_hsotg *hsotg);
+
/*
* Dump core registers and SPRAM
*/
@@ -1392,6 +1399,7 @@ int dwc2_hsotg_resume(struct dwc2_hsotg *dwc2);
int dwc2_gadget_init(struct dwc2_hsotg *hsotg);
void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
bool reset);
+void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg);
void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg);
void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2);
int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode);
@@ -1417,6 +1425,7 @@ static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg)
{ return 0; }
static inline void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
bool reset) {}
+static inline void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) {}
static inline void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg) {}
static inline void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2) {}
static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg,
diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c
new file mode 100644
index 000000000000..c00073e2c48b
--- /dev/null
+++ b/drivers/usb/dwc2/drd.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drd.c - DesignWare USB2 DRD Controller Dual-role support
+ *
+ * Copyright (C) 2020 STMicroelectronics
+ *
+ * Author(s): Amelie Delaunay <amelie.delaunay@...com>
+ */
+
+#include <linux/iopoll.h>
+#include <linux/platform_device.h>
+#include <linux/usb/role.h>
+#include "core.h"
+
+static void dwc2_ovr_init(struct dwc2_hsotg *hsotg)
+{
+ unsigned long flags;
+ u32 gotgctl;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ gotgctl = dwc2_readl(hsotg, GOTGCTL);
+ gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN | GOTGCTL_VBVALOEN;
+ gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
+ gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
+ dwc2_writel(hsotg, gotgctl, GOTGCTL);
+
+ dwc2_force_mode(hsotg, false);
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
+{
+ u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
+
+ /* Check if A-Session is already in the right state */
+ if ((valid && (gotgctl & GOTGCTL_ASESVLD)) ||
+ (!valid && !(gotgctl & GOTGCTL_ASESVLD)))
+ return -EALREADY;
+
+ if (valid)
+ gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL;
+ else
+ gotgctl &= ~(GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
+ dwc2_writel(hsotg, gotgctl, GOTGCTL);
+
+ return 0;
+}
+
+static int dwc2_ovr_bvalid(struct dwc2_hsotg *hsotg, bool valid)
+{
+ u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
+
+ /* Check if B-Session is already in the right state */
+ if ((valid && (gotgctl & GOTGCTL_BSESVLD)) ||
+ (!valid && !(gotgctl & GOTGCTL_BSESVLD)))
+ return -EALREADY;
+
+ if (valid)
+ gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL;
+ else
+ gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL);
+ dwc2_writel(hsotg, gotgctl, GOTGCTL);
+
+ return 0;
+}
+
+static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
+{
+ struct dwc2_hsotg *hsotg = usb_role_switch_get_drvdata(sw);
+ unsigned long flags;
+ int already = 0;
+
+ /* Skip session not in line with dr_mode */
+ if ((role == USB_ROLE_DEVICE && hsotg->dr_mode == USB_DR_MODE_HOST) ||
+ (role == USB_ROLE_HOST && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
+ return -EINVAL;
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+ IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+ /* Skip session if core is in test mode */
+ if (role == USB_ROLE_NONE && hsotg->test_mode) {
+ dev_dbg(hsotg->dev, "Core is in test mode\n");
+ return -EBUSY;
+ }
+#endif
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ if (role == USB_ROLE_HOST) {
+ already = dwc2_ovr_avalid(hsotg, true);
+ } else if (role == USB_ROLE_DEVICE) {
+ already = dwc2_ovr_bvalid(hsotg, true);
+ /* This clear DCTL.SFTDISCON bit */
+ dwc2_hsotg_core_connect(hsotg);
+ } else {
+ if (dwc2_is_device_mode(hsotg)) {
+ if (!dwc2_ovr_bvalid(hsotg, false))
+ /* This set DCTL.SFTDISCON bit */
+ dwc2_hsotg_core_disconnect(hsotg);
+ } else {
+ dwc2_ovr_avalid(hsotg, false);
+ }
+ }
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ if (!already &&
+ role != USB_ROLE_NONE && hsotg->dr_mode == USB_DR_MODE_OTG)
+ /* This will raise a Connector ID Status Change Interrupt */
+ dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
+
+ dev_dbg(hsotg->dev, "%s-session valid\n",
+ role == USB_ROLE_NONE ? "No" :
+ role == USB_ROLE_HOST ? "A" : "B");
+
+ return 0;
+}
+
+int dwc2_drd_init(struct dwc2_hsotg *hsotg)
+{
+ struct usb_role_switch_desc role_sw_desc = {0};
+ struct usb_role_switch *role_sw;
+ int ret;
+
+ if (!device_property_read_bool(hsotg->dev, "usb-role-switch"))
+ return 0;
+
+ role_sw_desc.driver_data = hsotg;
+ role_sw_desc.fwnode = dev_fwnode(hsotg->dev);
+ role_sw_desc.set = dwc2_drd_role_sw_set;
+ role_sw_desc.allow_userspace_control = true;
+
+ role_sw = usb_role_switch_register(hsotg->dev, &role_sw_desc);
+ if (IS_ERR(role_sw)) {
+ ret = PTR_ERR(role_sw);
+ dev_err(hsotg->dev,
+ "failed to register role switch: %d\n", ret);
+ return ret;
+ }
+
+ hsotg->role_sw = role_sw;
+
+ /* Enable override and initialize values */
+ dwc2_ovr_init(hsotg);
+
+ return 0;
+}
+
+void dwc2_drd_suspend(struct dwc2_hsotg *hsotg)
+{
+ u32 gintsts, gintmsk;
+
+ if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) {
+ gintmsk = dwc2_readl(hsotg, GINTMSK);
+ gintmsk &= ~GINTSTS_CONIDSTSCHNG;
+ dwc2_writel(hsotg, gintmsk, GINTMSK);
+ gintsts = dwc2_readl(hsotg, GINTSTS);
+ dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS);
+ }
+}
+
+void dwc2_drd_resume(struct dwc2_hsotg *hsotg)
+{
+ u32 gintsts, gintmsk;
+
+ if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) {
+ gintsts = dwc2_readl(hsotg, GINTSTS);
+ dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS);
+ gintmsk = dwc2_readl(hsotg, GINTMSK);
+ gintmsk |= GINTSTS_CONIDSTSCHNG;
+ dwc2_writel(hsotg, gintmsk, GINTMSK);
+ }
+}
+
+void dwc2_drd_exit(struct dwc2_hsotg *hsotg)
+{
+ if (hsotg->role_sw)
+ usb_role_switch_unregister(hsotg->role_sw);
+}
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 7faf5f8c056d..f069530110d9 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3532,7 +3532,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
dwc2_readl(hsotg, DOEPCTL0));
}
-static void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
+void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
{
/* set the soft-disconnect bit */
dwc2_set_bit(hsotg, DCTL, DCTL_SFTDISCON);
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index c347d93eae64..1a5c196b8c8e 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -317,6 +317,8 @@ static int dwc2_driver_remove(struct platform_device *dev)
if (hsotg->params.activate_stm_id_vb_detection)
regulator_disable(hsotg->usb33d);
+ dwc2_drd_exit(hsotg);
+
if (hsotg->ll_hw_enabled)
dwc2_lowlevel_hw_disable(hsotg);
@@ -532,6 +534,13 @@ static int dwc2_driver_probe(struct platform_device *dev)
dwc2_writel(hsotg, ggpio, GGPIO);
}
+ retval = dwc2_drd_init(hsotg);
+ if (retval) {
+ if (retval != -EPROBE_DEFER)
+ dev_err(hsotg->dev, "failed to initialize dual-role\n");
+ goto error_init;
+ }
+
if (hsotg->dr_mode != USB_DR_MODE_HOST) {
retval = dwc2_gadget_init(hsotg);
if (retval)
@@ -589,6 +598,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
return 0;
error_init:
+ dwc2_drd_exit(hsotg);
+
if (hsotg->params.activate_stm_id_vb_detection)
regulator_disable(hsotg->usb33d);
error:
@@ -605,6 +616,8 @@ static int __maybe_unused dwc2_suspend(struct device *dev)
if (is_device_mode)
dwc2_hsotg_suspend(dwc2);
+ dwc2_drd_suspend(dwc2);
+
if (dwc2->params.activate_stm_id_vb_detection) {
unsigned long flags;
u32 ggpio, gotgctl;
@@ -685,6 +698,8 @@ static int __maybe_unused dwc2_resume(struct device *dev)
/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
dwc2_force_dr_mode(dwc2);
+ dwc2_drd_resume(dwc2);
+
if (dwc2_is_device_mode(dwc2))
ret = dwc2_hsotg_resume(dwc2);
--
2.17.1
Powered by blists - more mailing lists