linux-kernel - Re: [PATCH v3 0/3] Add USB role switch support to DWC2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4c44f596-d2c3-6d2f-bf28-9e3964b6e6f1@st.com>
Date:   Fri, 24 Jul 2020 14:43:45 +0200
From:   Amelie DELAUNAY <amelie.delaunay@...com>
To:     Minas Harutyunyan <hminas@...opsys.com>,
        Felipe Balbi <balbi@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Rob Herring <robh+dt@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...com>
CC:     <linux-usb@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        Fabrice Gasnier <fabrice.gasnier@...com>,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: Re: [PATCH v3 0/3] Add USB role switch support to DWC2

Series dropped.

On 7/24/20 12:47 PM, Amelie Delaunay wrote:
> When using usb-c connector (but it can also be the case with a micro-b
> connector), iddig, avalid, bvalid, vbusvalid input signals may not be
> connected to the DWC2 OTG controller.
> DWC2 OTG controller features an overriding control of the PHY voltage valid
> and ID input signals.
> So, missing signals can be forced using usb role from usb role switch and
> this override feature.
> 
> This series adds support for usb role switch to dwc2, by using overriding
> control of the PHY voltage valid and ID input signals.
> 
> It has been tested on stm32mp157c-dk2 [1], which has a Type-C connector
> managed by a Type-C port controller, and connected to USB OTG controller.
> 
> [1] https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html
> 
> Amelie Delaunay (3):
>    usb: dwc2: override PHY input signals with usb role switch support
>    dt-bindings: usb: dwc2: add optional usb-role-switch property
>    usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15
>      SoCs
> ---
> Changes in v3:
> - Fix build issue reported by kernel test robot in drd.c
> Changes in v2:
> - Previous DT patch already in stm32-next branch so removed from v2 patchset
>    "ARM: dts: stm32: enable usb-role-switch on USB OTG on stm32mp15xx-dkx"
> - DWC2 DT bindings update added
> - Build issue reported by kernel test robot fixed
> - Martin's comments taken into account
> ---
>   .../devicetree/bindings/usb/dwc2.yaml         |   4 +
>   drivers/usb/dwc2/Kconfig                      |   1 +
>   drivers/usb/dwc2/Makefile                     |   2 +-
>   drivers/usb/dwc2/core.h                       |   9 +
>   drivers/usb/dwc2/drd.c                        | 181 ++++++++++++++++++
>   drivers/usb/dwc2/gadget.c                     |   2 +-
>   drivers/usb/dwc2/params.c                     |   4 +-
>   drivers/usb/dwc2/platform.c                   |  15 ++
>   8 files changed, 215 insertions(+), 3 deletions(-)
>   create mode 100644 drivers/usb/dwc2/drd.c
>