| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200725231834.25642-5-michael@walle.cc>
Date: Sun, 26 Jul 2020 01:18:25 +0200
From: Michael Walle <michael@...le.cc>
To: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org,
linux-pwm@...r.kernel.org, linux-watchdog@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Lee Jones <lee.jones@...aro.org>,
Thierry Reding <thierry.reding@...il.com>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <maz@...nel.org>, Mark Brown <broonie@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>, Pavel Machek <pavel@....cz>,
Michael Walle <michael@...le.cc>
Subject: [PATCH v6 04/13] irqchip: add sl28cpld interrupt controller support
Add support for the interrupt controller inside the sl28 CPLD management
controller.
The interrupt controller can handle at most 8 interrupts and is really
simplistic and consists only of an interrupt mask and an interrupt
pending register.
Signed-off-by: Michael Walle <michael@...le.cc>
Acked-by: Marc Zyngier <maz@...nel.org>
---
Changes since v5:
- none
Changes since v4:
- update copyright year
- don't use "int irq" instead of "unsigne int irq", because
platform_get_irq() might return a negative error code. Found by "kernel
test robot <lkp@...el.com>
- remove comma in terminator line of the compatible strings list,
suggested by Andy
- use newer devm_regmap_add_irq_chip_fwnode()
- don't use KBUID_MODNAME, suggested by Andy
- remove the platform device table
Changes since v3:
- see cover letter
drivers/irqchip/Kconfig | 8 +++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-sl28cpld.c | 96 ++++++++++++++++++++++++++++++++++
3 files changed, 105 insertions(+)
create mode 100644 drivers/irqchip/irq-sl28cpld.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 216b3b8392b5..b23d23eed3a5 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -246,6 +246,14 @@ config RENESAS_RZA1_IRQC
Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
to 8 external interrupts with configurable sense select.
+config SL28CPLD_INTC
+ bool "Kontron sl28cpld IRQ controller"
+ select MFD_SIMPLE_MFD_I2C
+ select REGMAP_IRQ
+ help
+ Interrupt controller driver for the board management controller
+ found on the Kontron sl28 CPLD.
+
config ST_IRQCHIP
bool
select REGMAP
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 133f9c45744a..39af7d89204d 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -111,3 +111,4 @@ obj-$(CONFIG_LOONGSON_HTPIC) += irq-loongson-htpic.o
obj-$(CONFIG_LOONGSON_HTVEC) += irq-loongson-htvec.o
obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-loongson-pch-pic.o
obj-$(CONFIG_LOONGSON_PCH_MSI) += irq-loongson-pch-msi.o
+obj-$(CONFIG_SL28CPLD_INTC) += irq-sl28cpld.o
diff --git a/drivers/irqchip/irq-sl28cpld.c b/drivers/irqchip/irq-sl28cpld.c
new file mode 100644
index 000000000000..0aa50d025ef6
--- /dev/null
+++ b/drivers/irqchip/irq-sl28cpld.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sl28cpld interrupt controller driver
+ *
+ * Copyright 2020 Kontron Europe GmbH
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#define INTC_IE 0x00
+#define INTC_IP 0x01
+
+static const struct regmap_irq sl28cpld_irqs[] = {
+ REGMAP_IRQ_REG_LINE(0, 8),
+ REGMAP_IRQ_REG_LINE(1, 8),
+ REGMAP_IRQ_REG_LINE(2, 8),
+ REGMAP_IRQ_REG_LINE(3, 8),
+ REGMAP_IRQ_REG_LINE(4, 8),
+ REGMAP_IRQ_REG_LINE(5, 8),
+ REGMAP_IRQ_REG_LINE(6, 8),
+ REGMAP_IRQ_REG_LINE(7, 8),
+};
+
+struct sl28cpld_intc {
+ struct regmap *regmap;
+ struct regmap_irq_chip chip;
+ struct regmap_irq_chip_data *irq_data;
+};
+
+static int sl28cpld_intc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sl28cpld_intc *irqchip;
+ int irq;
+ u32 base;
+ int ret;
+
+ if (!dev->parent)
+ return -ENODEV;
+
+ irqchip = devm_kzalloc(dev, sizeof(*irqchip), GFP_KERNEL);
+ if (!irqchip)
+ return -ENOMEM;
+
+ irqchip->regmap = dev_get_regmap(dev->parent, NULL);
+ if (!irqchip->regmap)
+ return -ENODEV;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ret = device_property_read_u32(&pdev->dev, "reg", &base);
+ if (ret)
+ return -EINVAL;
+
+ irqchip->chip.name = "sl28cpld-intc";
+ irqchip->chip.irqs = sl28cpld_irqs;
+ irqchip->chip.num_irqs = ARRAY_SIZE(sl28cpld_irqs);
+ irqchip->chip.num_regs = 1;
+ irqchip->chip.status_base = base + INTC_IP;
+ irqchip->chip.mask_base = base + INTC_IE;
+ irqchip->chip.mask_invert = true,
+ irqchip->chip.ack_base = base + INTC_IP;
+
+ return devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev),
+ irqchip->regmap, irq,
+ IRQF_SHARED | IRQF_ONESHOT, 0,
+ &irqchip->chip,
+ &irqchip->irq_data);
+}
+
+static const struct of_device_id sl28cpld_intc_of_match[] = {
+ { .compatible = "kontron,sl28cpld-intc" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sl28cpld_intc_of_match);
+
+static struct platform_driver sl28cpld_intc_driver = {
+ .probe = sl28cpld_intc_probe,
+ .driver = {
+ .name = "sl28cpld-intc",
+ .of_match_table = sl28cpld_intc_of_match,
+ }
+};
+module_platform_driver(sl28cpld_intc_driver);
+
+MODULE_DESCRIPTION("sl28cpld Interrupt Controller Driver");
+MODULE_AUTHOR("Michael Walle <michael@...le.cc>");
+MODULE_LICENSE("GPL");
--
2.20.1
Powered by blists - more mailing lists