lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200727164613.19744-5-paul@crapouillou.net>
Date:   Mon, 27 Jul 2020 18:46:11 +0200
From:   Paul Cercueil <paul@...pouillou.net>
To:     Thierry Reding <thierry.reding@...il.com>,
        Sam Ravnborg <sam@...nborg.org>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Rob Herring <robh+dt@...nel.org>,
        Andrzej Hajda <a.hajda@...sung.com>,
        Neil Armstrong <narmstrong@...libre.com>,
        Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
        Jonas Karlman <jonas@...boo.se>,
        Jernej Skrabec <jernej.skrabec@...l.net>,
        Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
        Maxime Ripard <mripard@...nel.org>,
        Thomas Zimmermann <tzimmermann@...e.de>,
        Noralf Trønnes <noralf@...nnes.org>
Cc:     od@...c.me, dri-devel@...ts.freedesktop.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH 4/6] drm/panel: Add panel driver for NewVision NV3052C based LCDs

This driver supports the NewVision NV3052C based LCDs. Right now, it
only supports the LeadTek LTK035C5444T 2.4" 640x480 TFT LCD panel, which
can be found in the Anbernic RG-350M handheld console.

Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-newvision-nv3052c.c   | 523 ++++++++++++++++++
 3 files changed, 533 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-newvision-nv3052c.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index de2f2a452be5..6a8a51a702d8 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -198,6 +198,15 @@ config DRM_PANEL_NEC_NL8048HL11
 	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
 	  as a module, choose M here.
 
+config DRM_PANEL_NEWVISION_NV3052C
+	tristate "NewVision NV3052C DSI/SPI RGB panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the panels built
+	  around the NewVision NV3052C display controller.
+
 config DRM_PANEL_NOVATEK_NT35510
 	tristate "Novatek NT35510 RGB panel driver"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index e45ceac6286f..a0516ced87db 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
 obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
 obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
 obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
+obj-$(CONFIG_DRM_PANEL_NEWVISION_NV3052C) += panel-newvision-nv3052c.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
 obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
 obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o
diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
new file mode 100644
index 000000000000..2feabef6dc3c
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NevVision NV3052C IPS LCD panel driver
+ *
+ * Copyright (C) 2020, Paul Cercueil <paul@...pouillou.net>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+struct nv3052c_panel_info {
+	const struct drm_display_mode *display_modes;
+	unsigned int num_modes;
+	unsigned int bus_type;
+	u16 width_mm, height_mm;
+	u32 bus_format, bus_flags;
+};
+
+struct nv3052c_reg {
+	u8 cmd;
+	u8 value;
+};
+
+struct nv3052c {
+	struct drm_panel drm_panel;
+	struct mipi_dsi_device *dsi;
+	struct device *dev;
+
+	struct regulator *supply;
+	const struct nv3052c_panel_info *panel_info;
+
+	struct gpio_desc *reset_gpio;
+
+	struct backlight_device *backlight;
+};
+
+static const struct nv3052c_reg nv3052c_regs[] = {
+	{ 0xff, 0x30 },
+	{ 0xff, 0x52 },
+	{ 0xff, 0x01 },
+	{ 0xe3, 0x00 },
+	{ 0x40, 0x00 },
+	{ 0x03, 0x40 },
+	{ 0x04, 0x00 },
+	{ 0x05, 0x03 },
+	{ 0x08, 0x00 },
+	{ 0x09, 0x07 },
+	{ 0x0a, 0x01 },
+	{ 0x0b, 0x32 },
+	{ 0x0c, 0x32 },
+	{ 0x0d, 0x0b },
+	{ 0x0e, 0x00 },
+	{ 0x23, 0xa0 },
+
+	{ 0x24, 0x0c },
+	{ 0x25, 0x06 },
+	{ 0x26, 0x14 },
+	{ 0x27, 0x14 },
+
+	{ 0x38, 0xcc },
+	{ 0x39, 0xd7 },
+	{ 0x3a, 0x4a },
+
+	{ 0x28, 0x40 },
+	{ 0x29, 0x01 },
+	{ 0x2a, 0xdf },
+	{ 0x49, 0x3c },
+	{ 0x91, 0x77 },
+	{ 0x92, 0x77 },
+	{ 0xa0, 0x55 },
+	{ 0xa1, 0x50 },
+	{ 0xa4, 0x9c },
+	{ 0xa7, 0x02 },
+	{ 0xa8, 0x01 },
+	{ 0xa9, 0x01 },
+	{ 0xaa, 0xfc },
+	{ 0xab, 0x28 },
+	{ 0xac, 0x06 },
+	{ 0xad, 0x06 },
+	{ 0xae, 0x06 },
+	{ 0xaf, 0x03 },
+	{ 0xb0, 0x08 },
+	{ 0xb1, 0x26 },
+	{ 0xb2, 0x28 },
+	{ 0xb3, 0x28 },
+	{ 0xb4, 0x33 },
+	{ 0xb5, 0x08 },
+	{ 0xb6, 0x26 },
+	{ 0xb7, 0x08 },
+	{ 0xb8, 0x26 },
+	{ 0xf0, 0x00 },
+	{ 0xf6, 0xc0 },
+
+	{ 0xff, 0x30 },
+	{ 0xff, 0x52 },
+	{ 0xff, 0x02 },
+	{ 0xb0, 0x0b },
+	{ 0xb1, 0x16 },
+	{ 0xb2, 0x17 },
+	{ 0xb3, 0x2c },
+	{ 0xb4, 0x32 },
+	{ 0xb5, 0x3b },
+	{ 0xb6, 0x29 },
+	{ 0xb7, 0x40 },
+	{ 0xb8, 0x0d },
+	{ 0xb9, 0x05 },
+	{ 0xba, 0x12 },
+	{ 0xbb, 0x10 },
+	{ 0xbc, 0x12 },
+	{ 0xbd, 0x15 },
+	{ 0xbe, 0x19 },
+	{ 0xbf, 0x0e },
+	{ 0xc0, 0x16 },
+	{ 0xc1, 0x0a },
+	{ 0xd0, 0x0c },
+	{ 0xd1, 0x17 },
+	{ 0xd2, 0x14 },
+	{ 0xd3, 0x2e },
+	{ 0xd4, 0x32 },
+	{ 0xd5, 0x3c },
+	{ 0xd6, 0x22 },
+	{ 0xd7, 0x3d },
+	{ 0xd8, 0x0d },
+	{ 0xd9, 0x07 },
+	{ 0xda, 0x13 },
+	{ 0xdb, 0x13 },
+	{ 0xdc, 0x11 },
+	{ 0xdd, 0x15 },
+	{ 0xde, 0x19 },
+	{ 0xdf, 0x10 },
+	{ 0xe0, 0x17 },
+	{ 0xe1, 0x0a },
+
+	{ 0xff, 0x30 },
+	{ 0xff, 0x52 },
+	{ 0xff, 0x03 },
+	{ 0x00, 0x2a },
+	{ 0x01, 0x2a },
+	{ 0x02, 0x2a },
+	{ 0x03, 0x2a },
+	{ 0x04, 0x61 },
+	{ 0x05, 0x80 },
+	{ 0x06, 0xc7 },
+	{ 0x07, 0x01 },
+	{ 0x08, 0x03 },
+	{ 0x09, 0x04 },
+	{ 0x70, 0x22 },
+	{ 0x71, 0x80 },
+	{ 0x30, 0x2a },
+	{ 0x31, 0x2a },
+	{ 0x32, 0x2a },
+	{ 0x33, 0x2a },
+	{ 0x34, 0x61 },
+	{ 0x35, 0xc5 },
+	{ 0x36, 0x80 },
+	{ 0x37, 0x23 },
+	{ 0x40, 0x03 },
+	{ 0x41, 0x04 },
+	{ 0x42, 0x05 },
+	{ 0x43, 0x06 },
+	{ 0x44, 0x11 },
+	{ 0x45, 0xe8 },
+	{ 0x46, 0xe9 },
+	{ 0x47, 0x11 },
+	{ 0x48, 0xea },
+	{ 0x49, 0xeb },
+	{ 0x50, 0x07 },
+	{ 0x51, 0x08 },
+	{ 0x52, 0x09 },
+	{ 0x53, 0x0a },
+	{ 0x54, 0x11 },
+	{ 0x55, 0xec },
+	{ 0x56, 0xed },
+	{ 0x57, 0x11 },
+	{ 0x58, 0xef },
+	{ 0x59, 0xf0 },
+	{ 0xb1, 0x01 },
+	{ 0xb4, 0x15 },
+	{ 0xb5, 0x16 },
+	{ 0xb6, 0x09 },
+	{ 0xb7, 0x0f },
+	{ 0xb8, 0x0d },
+	{ 0xb9, 0x0b },
+	{ 0xba, 0x00 },
+	{ 0xc7, 0x02 },
+	{ 0xca, 0x17 },
+	{ 0xcb, 0x18 },
+	{ 0xcc, 0x0a },
+	{ 0xcd, 0x10 },
+	{ 0xce, 0x0e },
+	{ 0xcf, 0x0c },
+	{ 0xd0, 0x00 },
+	{ 0x81, 0x00 },
+	{ 0x84, 0x15 },
+	{ 0x85, 0x16 },
+	{ 0x86, 0x10 },
+	{ 0x87, 0x0a },
+	{ 0x88, 0x0c },
+	{ 0x89, 0x0e },
+	{ 0x8a, 0x02 },
+	{ 0x97, 0x00 },
+	{ 0x9a, 0x17 },
+	{ 0x9b, 0x18 },
+	{ 0x9c, 0x0f },
+	{ 0x9d, 0x09 },
+	{ 0x9e, 0x0b },
+	{ 0x9f, 0x0d },
+	{ 0xa0, 0x01 },
+
+	{ 0xff, 0x30 },
+	{ 0xff, 0x52 },
+	{ 0xff, 0x02 },
+	{ 0x01, 0x01 },
+	{ 0x02, 0xda },
+	{ 0x03, 0xba },
+	{ 0x04, 0xa8 },
+	{ 0x05, 0x9a },
+	{ 0x06, 0x70 },
+	{ 0x07, 0xff },
+	{ 0x08, 0x91 },
+	{ 0x09, 0x90 },
+	{ 0x0a, 0xff },
+	{ 0x0b, 0x8f },
+	{ 0x0c, 0x60 },
+	{ 0x0d, 0x58 },
+	{ 0x0e, 0x48 },
+	{ 0x0f, 0x38 },
+	{ 0x10, 0x2b },
+
+	{ 0xff, 0x30 },
+	{ 0xff, 0x52 },
+	{ 0xff, 0x00 },
+	{ 0x36, 0x0a },
+};
+
+static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)
+{
+	return container_of(panel, struct nv3052c, drm_panel);
+}
+
+static int nv3052c_prepare(struct drm_panel *drm_panel)
+{
+	struct nv3052c *priv = to_nv3052c(drm_panel);
+	unsigned int i;
+	int err;
+
+	err = regulator_enable(priv->supply);
+	if (err) {
+		dev_err(priv->dev, "Failed to enable power supply: %d\n", err);
+		return err;
+	}
+
+	/* Reset the chip */
+	gpiod_set_value_cansleep(priv->reset_gpio, 1);
+	usleep_range(10, 1000);
+	gpiod_set_value_cansleep(priv->reset_gpio, 0);
+	usleep_range(5000, 20000);
+
+	for (i = 0; i < ARRAY_SIZE(nv3052c_regs); i++) {
+		err = mipi_dsi_dcs_write(priv->dsi, nv3052c_regs[i].cmd,
+					 &nv3052c_regs[i].value, 1);
+		if (err) {
+			dev_err(priv->dev, "Unable to set register: %d\n", err);
+			goto err_disable_regulator;
+		}
+	}
+
+	err = mipi_dsi_dcs_exit_sleep_mode(priv->dsi);
+	if (err) {
+		dev_err(priv->dev, "Unable to exit sleep mode: %d\n", err);
+		return err;
+	}
+
+	msleep(100);
+
+	return 0;
+
+err_disable_regulator:
+	regulator_disable(priv->supply);
+	return err;
+}
+
+static int nv3052c_unprepare(struct drm_panel *drm_panel)
+{
+	struct nv3052c *priv = to_nv3052c(drm_panel);
+	int err;
+
+	err = mipi_dsi_dcs_enter_sleep_mode(priv->dsi);
+	if (err) {
+		dev_err(priv->dev, "Unable to enter sleep mode: %d\n", err);
+		return err;
+	}
+
+	gpiod_set_value_cansleep(priv->reset_gpio, 1);
+
+	regulator_disable(priv->supply);
+
+	return 0;
+}
+
+static int nv3052c_enable(struct drm_panel *drm_panel)
+{
+	struct nv3052c *priv = to_nv3052c(drm_panel);
+	int err;
+
+	err = mipi_dsi_dcs_set_display_on(priv->dsi);
+	if (err) {
+		dev_err(priv->dev, "Unable to enable display: %d\n", err);
+		return err;
+	}
+
+	if (priv->backlight) {
+		/* Wait for the picture to be ready before enabling backlight */
+		usleep_range(10000, 20000);
+
+		err = backlight_enable(priv->backlight);
+	}
+
+	return err;
+}
+
+static int nv3052c_disable(struct drm_panel *drm_panel)
+{
+	struct nv3052c *priv = to_nv3052c(drm_panel);
+	int err;
+
+	backlight_disable(priv->backlight);
+
+	err = mipi_dsi_dcs_set_display_off(priv->dsi);
+	if (err) {
+		dev_err(priv->dev, "Unable to disable display: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int nv3052c_get_modes(struct drm_panel *drm_panel,
+			     struct drm_connector *connector)
+{
+	struct nv3052c *priv = to_nv3052c(drm_panel);
+	const struct nv3052c_panel_info *panel_info = priv->panel_info;
+	struct drm_display_mode *mode;
+	unsigned int i;
+
+	for (i = 0; i < panel_info->num_modes; i++) {
+		mode = drm_mode_duplicate(connector->dev,
+					  &panel_info->display_modes[i]);
+		if (!mode)
+			return -ENOMEM;
+
+		drm_mode_set_name(mode);
+
+		mode->type = DRM_MODE_TYPE_DRIVER;
+		if (panel_info->num_modes == 1)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+		drm_mode_probed_add(connector, mode);
+	}
+
+	connector->display_info.bpc = 8;
+	connector->display_info.width_mm = panel_info->width_mm;
+	connector->display_info.height_mm = panel_info->height_mm;
+
+	drm_display_info_set_bus_formats(&connector->display_info,
+					 &panel_info->bus_format, 1);
+	connector->display_info.bus_flags = panel_info->bus_flags;
+
+	return panel_info->num_modes;
+}
+
+static const struct drm_panel_funcs nv3052c_funcs = {
+	.prepare	= nv3052c_prepare,
+	.unprepare	= nv3052c_unprepare,
+	.enable		= nv3052c_enable,
+	.disable	= nv3052c_disable,
+	.get_modes	= nv3052c_get_modes,
+};
+
+static int nv3052c_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct nv3052c *priv;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, priv);
+
+	priv->panel_info = of_device_get_match_data(dev);
+	if (!priv->panel_info)
+		return -EINVAL;
+
+	dsi->bus_type = priv->panel_info->bus_type;
+
+	priv->supply = devm_regulator_get(dev, "power");
+	if (IS_ERR(priv->supply)) {
+		dev_err(dev, "Failed to get power supply\n");
+		return PTR_ERR(priv->supply);
+	}
+
+	priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->reset_gpio)) {
+		dev_err(dev, "Failed to get reset GPIO\n");
+		return PTR_ERR(priv->reset_gpio);
+	}
+
+	priv->backlight = devm_of_find_backlight(dev);
+	if (IS_ERR(priv->backlight)) {
+		err = PTR_ERR(priv->backlight);
+		if (err != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get backlight handle\n");
+		return err;
+	}
+
+	drm_panel_init(&priv->drm_panel, dev, &nv3052c_funcs,
+		       DRM_MODE_CONNECTOR_DPI);
+
+	err = drm_panel_add(&priv->drm_panel);
+	if (err < 0) {
+		dev_err(dev, "Failed to register priv\n");
+		return err;
+	}
+
+	err = mipi_dsi_attach(dsi);
+	if (err) {
+		dev_err(dev, "Failed to attach panel\n");
+		drm_panel_remove(&priv->drm_panel);
+		return err;
+	}
+
+	/*
+	 * We can't call mipi_dsi_maybe_register_tiny_driver(), since the
+	 * NV3052C does not support MIPI_DCS_WRITE_MEMORY_START.
+	 */
+
+	return 0;
+}
+
+static int nv3052c_remove(struct mipi_dsi_device *dsi)
+{
+	struct nv3052c *priv = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&priv->drm_panel);
+
+	nv3052c_disable(&priv->drm_panel);
+	nv3052c_unprepare(&priv->drm_panel);
+
+	return 0;
+}
+
+static const struct drm_display_mode ltk035c5444t_modes[] = {
+	{ /* 60 Hz */
+		.clock = 24000,
+		.hdisplay = 640,
+		.hsync_start = 640 + 96,
+		.hsync_end = 640 + 96 + 16,
+		.htotal = 640 + 96 + 16 + 48,
+		.vdisplay = 480,
+		.vsync_start = 480 + 5,
+		.vsync_end = 480 + 5 + 2,
+		.vtotal = 480 + 5 + 2 + 13,
+		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	},
+	{ /* 50 Hz */
+		.clock = 18000,
+		.hdisplay = 640,
+		.hsync_start = 640 + 39,
+		.hsync_end = 640 + 39 + 2,
+		.htotal = 640 + 39 + 2 + 39,
+		.vdisplay = 480,
+		.vsync_start = 480 + 5,
+		.vsync_end = 480 + 5 + 2,
+		.vtotal = 480 + 5 + 2 + 13,
+		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+	},
+};
+
+static const struct nv3052c_panel_info ltk035c5444t_spi_panel_info = {
+	.display_modes = ltk035c5444t_modes,
+	.num_modes = ARRAY_SIZE(ltk035c5444t_modes),
+	.bus_type = MIPI_DEVICE_TYPE_DBI_SPI_MODE1,
+	.width_mm = 77,
+	.height_mm = 64,
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
+};
+
+static const struct of_device_id nv3052c_of_match[] = {
+	{ .compatible = "leadtek,ltk035c5444t-spi", .data = &ltk035c5444t_spi_panel_info },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, nv3052c_of_match);
+
+static struct mipi_dsi_driver nv3052c_driver = {
+	.driver = {
+		.name = "nv3052c",
+		.of_match_table = nv3052c_of_match,
+	},
+	.probe = nv3052c_probe,
+	.remove = nv3052c_remove,
+};
+module_mipi_dsi_driver(nv3052c_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@...pouillou.net>");
+MODULE_LICENSE("GPL v2");
-- 
2.27.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ