linux-kernel - Re: [PATCH 2/6] rtlwifi: Remove unnecessary parenthese in rtl

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1595830034.12227.7.camel@realtek.com>
Date:   Mon, 27 Jul 2020 06:07:14 +0000
From:   Pkshih <pkshih@...ltek.com>
To:     "joe@...ches.com" <joe@...ches.com>,
        "Larry.Finger@...inger.net" <Larry.Finger@...inger.net>
CC:     "linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>,
        "kvalo@...eaurora.org" <kvalo@...eaurora.org>,
        "davem@...emloft.net" <davem@...emloft.net>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "kuba@...nel.org" <kuba@...nel.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [PATCH 2/6] rtlwifi: Remove unnecessary parenthese in rtl_dbg uses

On Sat, 2020-07-25 at 12:55 -0700, Joe Perches wrote:
> Make these statements a little simpler.
> 
> Signed-off-by: Joe Perches <joe@...ches.com>
> ---
>  drivers/net/wireless/realtek/rtlwifi/base.c   | 14 +++++------
>  .../rtlwifi/btcoexist/halbtc8192e2ant.c       | 23 ++++++++++---------
>  .../rtlwifi/btcoexist/halbtc8821a2ant.c       | 12 +++++-----
>  .../realtek/rtlwifi/btcoexist/halbtcoutsrc.c  |  9 ++++----
>  drivers/net/wireless/realtek/rtlwifi/pci.c    |  2 +-
>  5 files changed, 30 insertions(+), 30 deletions(-)
> 
> 

[...]

> diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
> b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
> index 8d28c68f083e..f9a2d8a6730c 100644
> --- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
> +++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
> @@ -874,11 +874,10 @@ static void halbtc_display_wifi_status(struct
> btc_coexist *btcoexist,
>  	seq_printf(m, "\n %-35s = %s / %s/ %s/ AP=%d ",
>  		   "Wifi freq/ bw/ traffic",
>  		   gl_btc_wifi_freq_string[wifi_freq],
> -		   ((wifi_under_b_mode) ? "11b" :
> -		    gl_btc_wifi_bw_string[wifi_bw]),
> -		   ((!wifi_busy) ? "idle" : ((BTC_WIFI_TRAFFIC_TX ==
> -					      wifi_traffic_dir) ? "uplink" :
> -					     "downlink")),
> +		   wifi_under_b_mode ? "11b" : gl_btc_wifi_bw_string[wifi_bw],
> +		   (!wifi_busy ? "idle" :
> +		    wifi_traffic_dir == BTC_WIFI_TRAFFIC_TX ? "uplink" :
> +		    "downlink"),

I think this would be better

+		   !wifi_busy ? "idle" :
+		   (wifi_traffic_dir == BTC_WIFI_TRAFFIC_TX ? "uplink" :
+		    "downlink"),



>  		   ap_num);
>  
>  	/* power status	 */
> diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c
> b/drivers/net/wireless/realtek/rtlwifi/pci.c
> index 1d0af72ee780..3189d1c50d52 100644
> --- a/drivers/net/wireless/realtek/rtlwifi/pci.c
> +++ b/drivers/net/wireless/realtek/rtlwifi/pci.c
> @@ -557,7 +557,7 @@ static void _rtl_pci_tx_isr(struct ieee80211_hw *hw, int
> prio)
>  		if (rtlpriv->rtlhal.earlymode_enable)
>  			skb_pull(skb, EM_HDR_LEN);
>  
> -		rtl_dbg(rtlpriv, (COMP_INTR | COMP_SEND), DBG_TRACE,
> +		rtl_dbg(rtlpriv, COMP_INTR | COMP_SEND, DBG_TRACE,
>  			"new ring->idx:%d, free: skb_queue_len:%d, free:
> seq:%x\n",
>  			ring->idx,
>  			skb_queue_len(&ring->queue),