[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e0ce41cd-9149-e43e-f4ca-e75503cb82e3@broadcom.com>
Date: Mon, 27 Jul 2020 15:48:02 -0700
From: Scott Branden <scott.branden@...adcom.com>
To: Thomas Gleixner <tglx@...utronix.de>, bp@...en8.de, x86@...nel.org,
mingo@...hat.com
Cc: linux-kernel@...r.kernel.org
Subject: Re: Kernel panic - not syncing: IO-APIC + timer doesn't work!
Bios now updated to latest. Same kernel panic issue. Log below.
I think it is related to power cycling quickly.
Should APIC work if PC power cycled in a few seconds or is that the problem?
On 2020-07-27 1:51 p.m., Thomas Gleixner wrote:
> Scott,
>
> Scott Branden <scott.branden@...adcom.com> writes:
>
>> Occasionally I get the following Kernel panic on boot. This is
>> running on the latest kernel but have seen it previously as well.
>> "Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with
>> apic=debug and send a report."
>>
>> I don't know who I am support to send a report to. But here is the log with apic=debug
>> [ 0.006000] ENABLING IO-APIC IRQs
>> [ 0.007000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ 0.007000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
>> [ 0.007000] ...trying to set up timer (IRQ0) through the 8259A ...
>> [ 0.007000] ..... (found apic 0 pin 2) ...
>> [ 0.007000] ....... failed.
>> [ 0.007000] ...trying to set up timer as Virtual Wire IRQ...
>> [ 0.007000] ..... failed.
>> [ 0.007000] ...trying to set up timer as ExtINT IRQ...
>> [ 0.007000] ..... failed :(.
>> [ 0.007000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option.
> Nothing which rings a bell. Can you please provide a boot log from a
> successful boot with apic=debug on the command line?
>
> Also you might check whether there are BIOS updates for this board. The
> early Ryzen BIOSes had some rough edges.
Same issue with latest BIOS:
Loading /bzImage... ok
[ 0.000000] Linux version 5.8.0-rc6 (oe-user@...host) (x86_64-poky-linux-gcc (GCC) 10.1.0, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP Sat Jul 25 03:55:25 UTC 2020
[ 0.000000] Command line: BOOT_IMAGE=/bzImage ima_policy=tcb apic=debug ip=dhcp raid=noautodetect console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfs/vxc,hard,tcp,intr,v3 rootwait nfsrootdebug
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a210000-0x00000000ca47ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca480000-0x00000000ca7acfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ca7ad000-0x00000000ca8fcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ca8fd000-0x00000000cafb4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cafb5000-0x00000000cbbfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cbbff000-0x00000000ccffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f37ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000042f380000-0x000000042fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.2.0 present.
[ 0.000000] DMI: System manufacturer System Product Name/PRIME X570-P, BIOS 2407 07/01/2020
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] last_pfn = 0x42f380 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] Scan for SMP in [mem 0x0009d400-0x0009d7ff]
[ 0.000000] check: Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CA8FB728 0000BC (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.000000] ACPI: FACP 0x00000000CA8EC000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CA8DF000 00C38D (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000CAF98000 000040
[ 0.000000] ACPI: SSDT 0x00000000CA8F2000 008C98 (v02 AMD AmdTable 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000CA8EE000 003A78 (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CA8ED000 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.000000] ACPI: FIDT 0x00000000CA8DE000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: WSMT 0x00000000CA8D8000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000CA8DC000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000CA8DB000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CA8DA000 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
[ 0.000000] ACPI: WPBT 0x00000000CA7FF000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
[ 0.000000] ACPI: IVRS 0x00000000CA7FE000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000000)
[ 0.000000] ACPI: PCCT 0x00000000CA7FD000 00006E (v02 AMD AmdTable 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000CA7FA000 002F29 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x00000000CA7F9000 000B58 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x00000000CA7F8000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CA7F7000 00052C (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000CA7F3000 003282 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: APIC 0x00000000CA7F1000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CA7F0000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
[ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f37ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42f37c000-0x42f37ffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042f37ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009bfefff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.000000] node 0: [mem 0x000000000a210000-0x00000000ca47ffff]
[ 0.000000] node 0: [mem 0x00000000cbbff000-0x00000000ccffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042f37ffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 22644 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f37ffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID d, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID d, APIC INT 09
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID d, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID d, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID d, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID d, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID d, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID d, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID d, APIC INT 08
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID d, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID d, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID d, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID d, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID d, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID d, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 20 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[ 0.000000] mapped IOAPIC to ffffffffff5fa000 (fec01000)
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x09bff000-0x09ffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xca480000-0xca7acfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xca7ad000-0xca8fcfff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xca8fd000-0xcafb4fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xcafb5000-0xcbbfefff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xcd000000-0xcfffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xefffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd3fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd400000-0xfd5fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfe9fffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xd0000000-0xefffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] percpu: Embedded 52 pages/cpu s172760 r8192 d32040 u262144
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4106455
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/bzImage ima_policy=tcb apic=debug ip=dhcp raid=noautodetect console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfs/vxc,hard,tcp,intr,v3 rootwait nfsrg
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 16292300K/16686640K available (16388K kernel code, 1982K rwdata, 4144K rodata, 1604K init, 1484K bss, 394340K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] ftrace: allocating 48968 entries in 192 pages
[ 0.000000] ftrace: allocated 192 pages with 2 groups
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=32.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.000000] NR_IRQS: 4352, nr_irqs: 1224, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x361/0x531 with crng_init=0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] printk: console [ttyS0] enabled
[ 0.000000] ACPI: Core revision 20200528
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.001000] Switched APIC routing to physical flat.
[ 0.003000] enabled ExtINT on CPU#0
[ 0.005000] ENABLING IO-APIC IRQs
[ 0.006000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.006000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.006000] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.006000] ..... (found apic 0 pin 2) ...
[ 0.006000] ....... failed.
[ 0.006000] ...trying to set up timer as Virtual Wire IRQ...
[ 0.006000] ..... failed.
[ 0.006000] ...trying to set up timer as ExtINT IRQ...
[ 0.006000] ..... failed :(.
[ 0.006000] Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option.
[ 0.006000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.8.0-rc6 #1
[ 0.006000] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 2407 07/01/2020
[ 0.006000] Call Trace:
[ 0.006000] dump_stack+0x78/0xa0
[ 0.006000] panic+0x100/0x2c6
[ 0.006000] setup_IO_APIC+0x826/0x86a
[ 0.006000] ? clear_IO_APIC_pin+0x173/0x240
[ 0.006000] x86_late_time_init+0x20/0x30
[ 0.006000] start_kernel+0x478/0x531
[ 0.006000] secondary_startup_64+0xb6/0xc0
[ 0.006000] ---[ end Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option. ]---
>
> Thanks,
>
> tglx
>
Powered by blists - more mailing lists