| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200727122358.00006c23@Huawei.com>
Date: Mon, 27 Jul 2020 12:23:58 +0100
From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
To: Sean V Kelley <sean.v.kelley@...el.com>
CC: <bhelgaas@...gle.com>, <rjw@...ysocki.net>, <ashok.raj@...nel.org>,
<tony.luck@...el.com>,
<sathyanarayanan.kuppuswamy@...ux.intel.com>,
<linux-pci@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Qiuxu Zhuo <qiuxu.zhuo@...el.com>
Subject: Re: [RFC PATCH 6/9] PCI: Add 'rcec' field to pci_dev for associated
RCiEPs
On Fri, 24 Jul 2020 10:22:20 -0700
Sean V Kelley <sean.v.kelley@...el.com> wrote:
> From: Qiuxu Zhuo <qiuxu.zhuo@...el.com>
>
> When attempting error recovery for an RCiEP associated with an RCEC device,
> there needs to be a way to update the Root Error Status, the Uncorrectable
> Error Status and the Uncorrectable Error Severity of the parent RCEC.
> So add the 'rcec' field to the pci_dev structure and provide a hook for the
> Root Port Driver to associate RCiEPs with their respective parent RCEC.
>
> Co-developed-by: Sean V Kelley <sean.v.kelley@...el.com>
> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@...el.com>
> Signed-off-by: Sean V Kelley <sean.v.kelley@...el.com>
I haven't tested yet, but I think there is one path in here that breaks
my case (no OS visible rcec / all done in firmware GHESv2 / APEI)
Jonathan
> ---
> drivers/pci/pcie/aer.c | 9 +++++----
> drivers/pci/pcie/err.c | 9 +++++++++
> drivers/pci/pcie/portdrv_pci.c | 15 +++++++++++++++
> include/linux/pci.h | 3 +++
> 4 files changed, 32 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index 3acf56683915..f1bf06be449e 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -1335,17 +1335,18 @@ static int aer_probe(struct pcie_device *dev)
> static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
> {
> int aer = dev->aer_cap;
> + int rc = 0;
> u32 reg32;
> - int rc;
> -
>
> /* Disable Root's interrupt in response to error messages */
> pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, ®32);
> reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
> pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
>
> - rc = pci_bus_error_reset(dev);
> - pci_info(dev, "Root Port link has been reset\n");
> + if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_EC) {
> + rc = pci_bus_error_reset(dev);
> + pci_info(dev, "Root Port link has been reset\n");
> + }
>
> /* Clear Root Error Status */
> pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, ®32);
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index 9b3ec94bdf1d..0aae7643132e 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -203,6 +203,11 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
> pci_walk_dev_affected(dev, report_frozen_detected, &status);
> if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
> status = flr_on_rciep(dev);
> + /*
> + * The callback only clears the Root Error Status
> + * of the RCEC (see aer.c).
> + */
> + reset_link(dev->rcec);
This looks dangerous for my case where APEI / GHESv2 is used. In that case
we don't expose an RCEC at all. I don't think the reset_link callback
is safe to a null pointer here. Fix may be as simple as
if (dev->rcec)
reset_link(dev->rcec);
> if (status != PCI_ERS_RESULT_RECOVERED) {
> pci_warn(dev, "function level reset failed\n");
> goto failed;
> @@ -246,7 +251,11 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
> pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC)) {
> pci_aer_clear_device_status(dev);
> pci_aer_clear_nonfatal_status(dev);
> + } else if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
> + pci_aer_clear_device_status(dev->rcec);
> + pci_aer_clear_nonfatal_status(dev->rcec);
These may be safe as in my both now have protections for !pcie_aer_is_native.
> }
> +
> pci_info(dev, "device recovery successful\n");
> return status;
>
> diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
> index d5b109499b10..f9409a0110c2 100644
> --- a/drivers/pci/pcie/portdrv_pci.c
> +++ b/drivers/pci/pcie/portdrv_pci.c
> @@ -90,6 +90,18 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
> #define PCIE_PORTDRV_PM_OPS NULL
> #endif /* !PM */
>
> +static int pcie_hook_rcec(struct pci_dev *pdev, void *data)
> +{
> + struct pci_dev *rcec = (struct pci_dev *)data;
> +
> + pdev->rcec = rcec;
> + pci_info(rcec, "RCiEP(under an RCEC) %04x:%02x:%02x.%d\n",
> + pci_domain_nr(pdev->bus), pdev->bus->number,
> + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
We may want to make this debug info at somepoint if we have a way
of discovering it from userspace. The PCI boot up is extremely
verbose already!
> +
> + return 0;
> +}
> +
> /*
> * pcie_portdrv_probe - Probe PCI-Express port devices
> * @dev: PCI-Express port device being probed
> @@ -110,6 +122,9 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
> (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_EC)))
> return -ENODEV;
>
> + if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC)
> + pcie_walk_rcec(dev, pcie_hook_rcec, dev);
> +
> status = pcie_port_device_register(dev);
> if (status)
> return status;
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 34c1c4f45288..e920f29df40b 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -326,6 +326,9 @@ struct pci_dev {
> #ifdef CONFIG_PCIEAER
> u16 aer_cap; /* AER capability offset */
> struct aer_stats *aer_stats; /* AER stats for this device */
> +#endif
> +#ifdef CONFIG_PCIEPORTBUS
> + struct pci_dev *rcec; /* Associated RCEC device */
> #endif
> u8 pcie_cap; /* PCIe capability offset */
> u8 msi_cap; /* MSI capability offset */
Powered by blists - more mailing lists