linux-kernel - [PATCH 2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1595918567-2017-2-git-send-email-Anson.Huang@nxp.com>
Date:   Tue, 28 Jul 2020 14:42:47 +0800
From:   Anson Huang <Anson.Huang@....com>
To:     wim@...ux-watchdog.org, linux@...ck-us.net, shawnguo@...nel.org,
        s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
        linux-watchdog@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc:     Linux-imx@....com
Subject: [PATCH 2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode

When kernel idle, system will enter wait/stop mode, wdog should continue
running in this scenario, and the refresh thread can wake up system from
wait/stop mode.

Signed-off-by: Anson Huang <Anson.Huang@....com>
---
 drivers/watchdog/imx7ulp_wdt.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
index b414ecf..271a2e4 100644
--- a/drivers/watchdog/imx7ulp_wdt.c
+++ b/drivers/watchdog/imx7ulp_wdt.c
@@ -22,6 +22,8 @@
 #define WDOG_CS_CLK		(LPO_CLK << LPO_CLK_SHIFT)
 #define WDOG_CS_EN		BIT(7)
 #define WDOG_CS_UPDATE		BIT(5)
+#define WDOG_CS_WAIT		BIT(1)
+#define WDOG_CS_STOP		BIT(0)
 
 #define WDOG_CNT	0x4
 #define WDOG_TOVAL	0x8
@@ -174,7 +176,8 @@ static void imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
 	/* set an initial timeout value in TOVAL */
 	writel(timeout, base + WDOG_TOVAL);
 	/* enable 32bit command sequence and reconfigure */
-	val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE;
+	val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE |
+	      WDOG_CS_WAIT | WDOG_CS_STOP;
 	writel(val, base + WDOG_CS);
 	imx7ulp_wdt_wait(base, WDOG_CS_RCS);
 	local_irq_enable();
-- 
2.7.4