[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <87sgdcf4a1.fsf@soft-dev15.microsemi.net>
Date: Tue, 28 Jul 2020 10:11:02 +0200
From: Lars Povlsen <lars.povlsen@...rochip.com>
To: Rob Herring <robh@...nel.org>
CC: Lars Povlsen <lars.povlsen@...rochip.com>,
Mark Brown <broonie@...nel.org>, Peter Rosin <peda@...ntia.se>,
"Microchip Linux Driver Support" <UNGLinuxDriver@...rochip.com>,
<linux-spi@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Serge Semin <fancer.lancer@...il.com>,
Serge Semin <Sergey.Semin@...kalelectronics.ru>
Subject: Re: [PATCH v4 4/6] dt-bindings: snps,dw-apb-ssi: Add sparx5 support, plus rx-sample-delay-ns property
Rob Herring writes:
> On Fri, Jul 24, 2020 at 01:14:02PM +0200, Lars Povlsen wrote:
>> This has the following changes for the snps,dw-apb-ss DT bindings:
>>
>> - Add "microchip,sparx5-spi" as the compatible for the Sparx5 SoC
>> controller
>>
>> - Add the property "rx-sample-delay-ns"
>>
>> Signed-off-by: Lars Povlsen <lars.povlsen@...rochip.com>
>> ---
>> .../bindings/spi/snps,dw-apb-ssi.yaml | 21 +++++++++++++++++++
>> 1 file changed, 21 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
>> index c62cbe79f00dd..c0adaad1aa695 100644
>> --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
>> +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
>> @@ -36,6 +36,8 @@ properties:
>> - mscc,ocelot-spi
>> - mscc,jaguar2-spi
>> - const: snps,dw-apb-ssi
>> + - description: Microchip Sparx5 SoC SPI Controller
>> + const: microchip,sparx5-spi
>> - description: Amazon Alpine SPI Controller
>> const: amazon,alpine-dw-apb-ssi
>> - description: Renesas RZ/N1 SPI Controller
>> @@ -93,6 +95,12 @@ properties:
>> - const: tx
>> - const: rx
>>
>> + rx-sample-delay-ns:
>> + description: Default value of the rx-sample-delay-ns property.
>> + This value will be used if the property is not explicitly defined
>> + for a SPI slave device. Default value is 0. See below.
>> + $ref: /schemas/types.yaml#/definitions/uint32
>
> Don't need a type for properties with unit suffixes.
>
> Also, add:
>
> 'default: 0'
>
Hi Rob!
Thank you for your input, all duly noted.
---Lars
>> +
>> patternProperties:
>> "^.*@[0-9a-f]+$":
>> type: object
>> @@ -107,6 +115,13 @@ patternProperties:
>> spi-tx-bus-width:
>> const: 1
>>
>> + rx-sample-delay-ns:
>> + description: SPI Rx sample delay offset, unit is nanoseconds.
>> + The delay from the default sample time before the actual
>> + sample of the rxd input signal occurs. The "rx_sample_delay"
>> + is an optional feature of the designware controller, and the
>> + upper limit is also subject to controller configuration.
>> +
>> unevaluatedProperties: false
>>
>> required:
>> @@ -129,5 +144,11 @@ examples:
>> num-cs = <2>;
>> cs-gpios = <&gpio0 13 0>,
>> <&gpio0 14 0>;
>> + rx-sample-delay-ns = <3>;
>> + spi-flash@1 {
>> + compatible = "spi-nand";
>> + reg = <1>;
>> + rx-sample-delay-ns = <7>;
>> + };
>> };
>> ...
>> --
>> 2.27.0
>>
--
Lars Povlsen,
Microchip
Powered by blists - more mailing lists