| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200728085757.888620-1-vaibhavgupta40@gmail.com>
Date: Tue, 28 Jul 2020 14:27:57 +0530
From: Vaibhav Gupta <vaibhavgupta40@...il.com>
To: Bjorn Helgaas <helgaas@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Bjorn Helgaas <bjorn@...gaas.com>,
Vaibhav Gupta <vaibhav.varodek@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>
Cc: Vaibhav Gupta <vaibhavgupta40@...il.com>,
linux-can@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-kernel-mentees@...ts.linuxfoundation.org,
Shuah Khan <skhan@...uxfoundation.org>
Subject: [PATCH v1] pch_can: use generic power management
Drivers using legacy power management .suspen()/.resume() callbacks
have to manage PCI states and device's PM states themselves. They also
need to take care of standard configuration registers.
Switch to generic power management framework using a single
"struct dev_pm_ops" variable to take the unnecessary load from the driver.
This also avoids the need for the driver to directly call most of the PCI
helper functions and device power state control functions, as through
the generic framework PCI Core takes care of the necessary operations,
and drivers are required to do only device-specific jobs.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@...il.com>
---
drivers/net/can/pch_can.c | 63 +++++++++++++--------------------------
1 file changed, 21 insertions(+), 42 deletions(-)
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index db41dddd5771..ca54a6e1c810 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -957,8 +957,7 @@ static void pch_can_remove(struct pci_dev *pdev)
free_candev(priv->ndev);
}
-#ifdef CONFIG_PM
-static void pch_can_set_int_custom(struct pch_can_priv *priv)
+static void __maybe_unused pch_can_set_int_custom(struct pch_can_priv *priv)
{
/* Clearing the IE, SIE and EIE bits of Can control register. */
pch_can_bit_clear(&priv->regs->cont, PCH_CTRL_IE_SIE_EIE);
@@ -969,14 +968,14 @@ static void pch_can_set_int_custom(struct pch_can_priv *priv)
}
/* This function retrieves interrupt enabled for the CAN device. */
-static u32 pch_can_get_int_enables(struct pch_can_priv *priv)
+static u32 __maybe_unused pch_can_get_int_enables(struct pch_can_priv *priv)
{
/* Obtaining the status of IE, SIE and EIE interrupt bits. */
return (ioread32(&priv->regs->cont) & PCH_CTRL_IE_SIE_EIE) >> 1;
}
-static u32 pch_can_get_rxtx_ir(struct pch_can_priv *priv, u32 buff_num,
- enum pch_ifreg dir)
+static u32 __maybe_unused pch_can_get_rxtx_ir(struct pch_can_priv *priv,
+ u32 buff_num, enum pch_ifreg dir)
{
u32 ie, enable;
@@ -997,8 +996,8 @@ static u32 pch_can_get_rxtx_ir(struct pch_can_priv *priv, u32 buff_num,
return enable;
}
-static void pch_can_set_rx_buffer_link(struct pch_can_priv *priv,
- u32 buffer_num, int set)
+static void __maybe_unused pch_can_set_rx_buffer_link(struct pch_can_priv *priv,
+ u32 buffer_num, int set)
{
iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, buffer_num);
@@ -1013,7 +1012,8 @@ static void pch_can_set_rx_buffer_link(struct pch_can_priv *priv,
pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, buffer_num);
}
-static u32 pch_can_get_rx_buffer_link(struct pch_can_priv *priv, u32 buffer_num)
+static u32 __maybe_unused pch_can_get_rx_buffer_link(struct pch_can_priv *priv,
+ u32 buffer_num)
{
u32 link;
@@ -1027,20 +1027,19 @@ static u32 pch_can_get_rx_buffer_link(struct pch_can_priv *priv, u32 buffer_num)
return link;
}
-static int pch_can_get_buffer_status(struct pch_can_priv *priv)
+static int __maybe_unused pch_can_get_buffer_status(struct pch_can_priv *priv)
{
return (ioread32(&priv->regs->treq1) & 0xffff) |
(ioread32(&priv->regs->treq2) << 16);
}
-static int pch_can_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused pch_can_suspend(struct device *dev_d)
{
int i;
- int retval;
u32 buf_stat; /* Variable for reading the transmit buffer status. */
int counter = PCH_COUNTER_LIMIT;
- struct net_device *dev = pci_get_drvdata(pdev);
+ struct net_device *dev = dev_get_drvdata(dev_d);
struct pch_can_priv *priv = netdev_priv(dev);
/* Stop the CAN controller */
@@ -1058,7 +1057,7 @@ static int pch_can_suspend(struct pci_dev *pdev, pm_message_t state)
udelay(1);
}
if (!counter)
- dev_err(&pdev->dev, "%s -> Transmission time out.\n", __func__);
+ dev_err(dev_d, "%s -> Transmission time out.\n", __func__);
/* Save interrupt configuration and then disable them */
priv->int_enables = pch_can_get_int_enables(priv);
@@ -1081,35 +1080,16 @@ static int pch_can_suspend(struct pci_dev *pdev, pm_message_t state)
/* Disable all Receive buffers */
pch_can_set_rx_all(priv, 0);
- retval = pci_save_state(pdev);
- if (retval) {
- dev_err(&pdev->dev, "pci_save_state failed.\n");
- } else {
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
- }
- return retval;
+ return 0;
}
-static int pch_can_resume(struct pci_dev *pdev)
+static int __maybe_unused pch_can_resume(struct device *dev_d)
{
int i;
- int retval;
- struct net_device *dev = pci_get_drvdata(pdev);
+ struct net_device *dev = dev_get_drvdata(dev_d);
struct pch_can_priv *priv = netdev_priv(dev);
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- retval = pci_enable_device(pdev);
- if (retval) {
- dev_err(&pdev->dev, "pci_enable_device failed.\n");
- return retval;
- }
-
- pci_enable_wake(pdev, PCI_D3hot, 0);
-
priv->can.state = CAN_STATE_ERROR_ACTIVE;
/* Disabling all interrupts. */
@@ -1146,12 +1126,8 @@ static int pch_can_resume(struct pci_dev *pdev)
/* Restore Run Mode */
pch_can_set_run_mode(priv, PCH_CAN_RUN);
- return retval;
+ return 0;
}
-#else
-#define pch_can_suspend NULL
-#define pch_can_resume NULL
-#endif
static int pch_can_get_berr_counter(const struct net_device *dev,
struct can_berr_counter *bec)
@@ -1252,13 +1228,16 @@ static int pch_can_probe(struct pci_dev *pdev,
return rc;
}
+static SIMPLE_DEV_PM_OPS(pch_can_pm_ops,
+ pch_can_suspend,
+ pch_can_resume);
+
static struct pci_driver pch_can_pci_driver = {
.name = "pch_can",
.id_table = pch_pci_tbl,
.probe = pch_can_probe,
.remove = pch_can_remove,
- .suspend = pch_can_suspend,
- .resume = pch_can_resume,
+ .driver.pm = &pch_can_pm_ops,
};
module_pci_driver(pch_can_pci_driver);
--
2.27.0
Powered by blists - more mailing lists