| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 28 Jul 2020 17:29:39 +0800
From: peng.fan@....com
To: ohad@...ery.com, bjorn.andersson@...aro.org, robh+dt@...nel.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com
Cc: linux-imx@....com, linux-remoteproc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Peng Fan <peng.fan@....com>
Subject: [PATCH 1/2] remoteproc: elf: support platform specific memory hook
From: Peng Fan <peng.fan@....com>
To arm64, "dc zva, dst" is used in memset.
Per ARM DDI 0487A.j, chapter C5.3.8 DC ZVA, Data Cache Zero by VA,
"If the memory region being zeroed is any type of Device memory,
this instruction can give an alignment fault which is prioritized
in the same way as other alignment faults that are determined
by the memory type."
On i.MX platforms, when elf is loaded to onchip TCM area, the region
is ioremapped, so "dc zva, dst" will trigger abort. And ioremap_wc()
on i.MX not able to write correct data to TCM area.
So we need to use io helpers, and extend the elf loader to support
platform specific memory functions.
Signed-off-by: Peng Fan <peng.fan@....com>
---
drivers/remoteproc/remoteproc_elf_loader.c | 20 ++++++++++++++++++--
include/linux/remoteproc.h | 2 ++
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index df68d87752e4..f442bac64432 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -129,6 +129,22 @@ u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw)
}
EXPORT_SYMBOL(rproc_elf_get_boot_addr);
+static void *rproc_elf_memcpy(struct rproc *rproc, void *dest, const void *src, size_t count)
+{
+ if (!rproc->ops->memcpy)
+ return memcpy(dest, src, count);
+
+ return rproc->ops->memcpy(rproc, dest, src, count);
+}
+
+static void *rproc_elf_memset(struct rproc *rproc, void *s, int c, size_t count)
+{
+ if (!rproc->ops->memset)
+ return memset(s, c, count);
+
+ return rproc->ops->memset(rproc, s, c, count);
+}
+
/**
* rproc_elf_load_segments() - load firmware segments to memory
* @rproc: remote processor which will be booted using these fw segments
@@ -214,7 +230,7 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
/* put the segment where the remote processor expects it */
if (filesz)
- memcpy(ptr, elf_data + offset, filesz);
+ rproc_elf_memcpy(rproc, ptr, elf_data + offset, filesz);
/*
* Zero out remaining memory for this segment.
@@ -224,7 +240,7 @@ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
* this.
*/
if (memsz > filesz)
- memset(ptr + filesz, 0, memsz - filesz);
+ rproc_elf_memset(rproc, ptr + filesz, 0, memsz - filesz);
}
return ret;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 0e8d2ff575b4..88fc9643c1a8 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -391,6 +391,8 @@ struct rproc_ops {
int (*load)(struct rproc *rproc, const struct firmware *fw);
int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
+ void *(*memcpy)(struct rproc *rproc, void *dest, const void *src, size_t count);
+ void *(*memset)(struct rproc *rproc, void *s, int c, size_t count);
unsigned long (*panic)(struct rproc *rproc);
};
--
2.16.4
Powered by blists - more mailing lists