| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200729205318.GN229995@builder.lan>
Date: Wed, 29 Jul 2020 13:53:18 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Georgi Djakov <georgi.djakov@...aro.org>
Cc: linux-pm@...r.kernel.org, evgreen@...omium.org,
akashast@...eaurora.org, mka@...omium.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] interconnect: Add bulk API helpers
On Wed 29 Jul 05:34 PDT 2020, Georgi Djakov wrote:
> There are drivers which just need to get multiple interconnect paths,
> request some predefined amounts of bandwidth and then just toggle the
> paths between enabled/disabled state.
>
> The aim of this patch is simplify the above and to allow drivers to put
> all the path names and bandwidth data into a single static icc_bulk_data
> table and call the icc_bulk_* functions on that table in order to scale
> all the interconnect paths in parallel.
>
> Suggested-by: Evan Green <evgreen@...omium.org>
> Suggested-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Regards,
Bjorn
> Signed-off-by: Georgi Djakov <georgi.djakov@...aro.org>
> ---
>
> v2:
> * Fix kernel-doc. (Bjorn)
> * Do not print EPROBE_DEFER errors. (Bjorn)
>
> v1: https://lore.kernel.org/r/20200528162542.30158-1-georgi.djakov@linaro.org/
>
> drivers/interconnect/Makefile | 2 +-
> drivers/interconnect/bulk.c | 117 ++++++++++++++++++++++++++++++++++
> include/linux/interconnect.h | 22 +++++++
> 3 files changed, 140 insertions(+), 1 deletion(-)
> create mode 100644 drivers/interconnect/bulk.c
>
> diff --git a/drivers/interconnect/Makefile b/drivers/interconnect/Makefile
> index 4825c287ca13..d203520b0a56 100644
> --- a/drivers/interconnect/Makefile
> +++ b/drivers/interconnect/Makefile
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
>
> CFLAGS_core.o := -I$(src)
> -icc-core-objs := core.o
> +icc-core-objs := core.o bulk.o
>
> obj-$(CONFIG_INTERCONNECT) += icc-core.o
> obj-$(CONFIG_INTERCONNECT_IMX) += imx/
> diff --git a/drivers/interconnect/bulk.c b/drivers/interconnect/bulk.c
> new file mode 100644
> index 000000000000..73e2c8d0a412
> --- /dev/null
> +++ b/drivers/interconnect/bulk.c
> @@ -0,0 +1,117 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <linux/interconnect-provider.h>
> +#include <linux/device.h>
> +#include <linux/export.h>
> +
> +/**
> + * of_icc_bulk_get() - get interconnect paths
> + * @dev: the device requesting the path
> + * @num_paths: the number of icc_bulk_data
> + * @paths: the table with the paths we want to get
> + *
> + * Returns 0 on success or negative errno otherwise.
> + */
> +int __must_check of_icc_bulk_get(struct device *dev, int num_paths,
> + struct icc_bulk_data *paths)
> +{
> + int ret, i;
> +
> + for (i = 0; i < num_paths; i++) {
> + paths[i].path = of_icc_get(dev, paths[i].name);
> + if (IS_ERR(paths[i].path)) {
> + ret = PTR_ERR(paths[i].path);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "of_icc_get() failed on path %s (%d)\n",
> + paths[i].name, ret);
> + paths[i].path = NULL;
> + goto err;
> + }
> + }
> +
> + return 0;
> +
> +err:
> + icc_bulk_put(i, paths);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(of_icc_bulk_get);
> +
> +/**
> + * icc_bulk_put() - put a list of interconnect paths
> + * @num_paths: the number of icc_bulk_data
> + * @paths: the icc_bulk_data table with the paths being put
> + */
> +void icc_bulk_put(int num_paths, struct icc_bulk_data *paths)
> +{
> + while (--num_paths >= 0) {
> + icc_put(paths[num_paths].path);
> + paths[num_paths].path = NULL;
> + }
> +}
> +EXPORT_SYMBOL_GPL(icc_bulk_put);
> +
> +/**
> + * icc_bulk_set() - set bandwidth to a set of paths
> + * @num_paths: the number of icc_bulk_data
> + * @paths: the icc_bulk_data table containing the paths and bandwidth
> + *
> + * Returns 0 on success or negative errno otherwise.
> + */
> +int icc_bulk_set_bw(int num_paths, const struct icc_bulk_data *paths)
> +{
> + int ret = 0;
> + int i;
> +
> + for (i = 0; i < num_paths; i++) {
> + ret = icc_set_bw(paths[i].path, paths[i].avg_bw, paths[i].peak_bw);
> + if (ret) {
> + pr_err("icc_set_bw() failed on path %s (%d)\n", paths[i].name, ret);
> + return ret;
> + }
> + }
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(icc_bulk_set_bw);
> +
> +/**
> + * icc_bulk_enable() - enable a previously disabled set of paths
> + * @num_paths: the number of icc_bulk_data
> + * @paths: the icc_bulk_data table containing the paths and bandwidth
> + *
> + * Returns 0 on success or negative errno otherwise.
> + */
> +int icc_bulk_enable(int num_paths, const struct icc_bulk_data *paths)
> +{
> + int ret, i;
> +
> + for (i = 0; i < num_paths; i++) {
> + ret = icc_enable(paths[i].path);
> + if (ret) {
> + pr_err("icc_enable() failed on path %s (%d)\n", paths[i].name, ret);
> + goto err;
> + }
> + }
> +
> + return 0;
> +
> +err:
> + icc_bulk_disable(i, paths);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(icc_bulk_enable);
> +
> +/**
> + * icc_bulk_disable() - disable a set of interconnect paths
> + * @num_paths: the number of icc_bulk_data
> + * @paths: the icc_bulk_data table containing the paths and bandwidth
> + */
> +void icc_bulk_disable(int num_paths, const struct icc_bulk_data *paths)
> +{
> + while (--num_paths >= 0)
> + icc_disable(paths[num_paths].path);
> +}
> +EXPORT_SYMBOL_GPL(icc_bulk_disable);
> diff --git a/include/linux/interconnect.h b/include/linux/interconnect.h
> index 3a63d98613fc..f2dd2fc8d3cd 100644
> --- a/include/linux/interconnect.h
> +++ b/include/linux/interconnect.h
> @@ -23,6 +23,28 @@
> struct icc_path;
> struct device;
>
> +/**
> + * struct icc_bulk_data - Data used for bulk icc operations.
> + *
> + * @path: reference to the interconnect path (internal use)
> + * @name: the name from the "interconnect-names" DT property
> + * @avg_bw: average bandwidth in icc units
> + * @peak_bw: peak bandwidth in icc units
> + */
> +struct icc_bulk_data {
> + struct icc_path *path;
> + const char *name;
> + u32 avg_bw;
> + u32 peak_bw;
> +};
> +
> +int __must_check of_icc_bulk_get(struct device *dev, int num_paths,
> + struct icc_bulk_data *paths);
> +void icc_bulk_put(int num_paths, struct icc_bulk_data *paths);
> +int icc_bulk_set_bw(int num_paths, const struct icc_bulk_data *paths);
> +int icc_bulk_enable(int num_paths, const struct icc_bulk_data *paths);
> +void icc_bulk_disable(int num_paths, const struct icc_bulk_data *paths);
> +
> #if IS_ENABLED(CONFIG_INTERCONNECT)
>
> struct icc_path *icc_get(struct device *dev, const int src_id,
Powered by blists - more mailing lists