| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 30 Jul 2020 10:54:56 +0200
From: Marco Felsch <m.felsch@...gutronix.de>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: Horia Geantă <horia.geanta@....com>,
Herbert Xu <herbert@...dor.apana.org.au>,
"David S. Miller" <davem@...emloft.net>,
Rob Herring <robh+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
André Draszik <git@...red.net>,
Robin Gong <yibin.gong@....com>,
Anson Huang <anson.huang@....com>,
Fabio Estevam <festevam@...il.com>,
Aymen Sghaier <aymen.sghaier@....com>,
Adam Ford <aford173@...il.com>, linux-input@...r.kernel.org,
linux-crypto@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, NXP Linux Team <linux-imx@....com>
Subject: Re: [PATCH v3 2/3] Input: snvs_pwrkey - enable snvs clock as needed
Hi Dmitry,
On 20-07-29 23:04, Dmitry Torokhov wrote:
> On Wed, Jul 29, 2020 at 09:33:23AM +0200, Marco Felsch wrote:
> > Hi,
> >
> > On 20-07-23 10:43, Horia Geantă wrote:
> > > From: André Draszik <git@...red.net>
> > >
> > > At the moment, enabling this driver without the SNVS RTC driver
> > > being active will hang the kernel as soon as the power button
> > > is pressed.
> > >
> > > The reason is that in that case the SNVS isn't enabled, and
> > > any attempt to read the SNVS registers will simply hang forever.
> > >
> > > Ensure the clock is enabled (during the interrupt handler) to
> > > make this driver work.
> > >
> > > Also see commit 7f8993995410 ("drivers/rtc/rtc-snvs: add clock support")
> > > and commit edb190cb1734
> > > ("rtc: snvs: make sure clock is enabled for interrupt handle")
> > > for similar updates to the snvs rtc driver.
> > >
> > > Signed-off-by: André Draszik <git@...red.net>
> > > Reviewed-by: Horia Geantă <horia.geanta@....com>
> > > Signed-off-by: Horia Geantă <horia.geanta@....com>
> > > ---
> > > drivers/input/keyboard/snvs_pwrkey.c | 28 +++++++++++++++++++++++++++-
> > > 1 file changed, 27 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
> > > index 2f5e3ab5ed63..382d2ae82c9b 100644
> > > --- a/drivers/input/keyboard/snvs_pwrkey.c
> > > +++ b/drivers/input/keyboard/snvs_pwrkey.c
> > > @@ -16,6 +16,7 @@
> > > #include <linux/of_address.h>
> > > #include <linux/platform_device.h>
> > > #include <linux/pm_wakeirq.h>
> > > +#include <linux/clk.h>
> > > #include <linux/mfd/syscon.h>
> > > #include <linux/regmap.h>
> > >
> > > @@ -38,6 +39,7 @@ struct pwrkey_drv_data {
> > > int wakeup;
> > > struct timer_list check_timer;
> > > struct input_dev *input;
> > > + struct clk *clk;
> > > u8 minor_rev;
> > > };
> > >
> > > @@ -47,7 +49,10 @@ static void imx_imx_snvs_check_for_events(struct timer_list *t)
> > > struct input_dev *input = pdata->input;
> > > u32 state;
> > >
> > > + clk_enable(pdata->clk);
> > > regmap_read(pdata->snvs, SNVS_HPSR_REG, &state);
> > > + clk_disable(pdata->clk);
> > > +
> > > state = state & SNVS_HPSR_BTN ? 1 : 0;
> > >
> > > /* only report new event if status changed */
> > > @@ -74,11 +79,13 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
> > >
> > > pm_wakeup_event(input->dev.parent, 0);
> > >
> > > + clk_enable(pdata->clk);
> > > +
> > > regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
> > > if (lp_status & SNVS_LPSR_SPO) {
> > > if (pdata->minor_rev == 0) {
> > > /*
> > > - * The first generation i.MX6 SoCs only sends an
> > > + * The first generation i.MX[6|7] SoCs only send an
> > > * interrupt on button release. To mimic power-key
> > > * usage, we'll prepend a press event.
> > > */
> > > @@ -96,6 +103,8 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
> > > /* clear SPO status */
> > > regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
> > >
> > > + clk_disable(pdata->clk);
> >
> > I'm not so happy about clk_enable/disable() during the interrupt
> > routine since those routines should be handled fast. Since we assume
> > that the clock is always oni
>
> We do? I thought that the fact that clock might be off is the root of
> the problem.
Currently yes else the driver would never work. I thought so at least
after reading the commit message. But after checking the imx6qdl I
found that the imx6qdl has no clock-gate for the SNVS module. I think
Horia had Problems on a imx7 device since he adapted the comment to
cover the imx7. Which makes more sense since the imx7 has a clock gate
but the commit message is wrong. After checking the device-tree's in
mainline all imx7 and imx8 devices specify the "snvs-pwrkey" clock so
this is a new feature and they need the clock. So IMHO for those devices
a clock should be required and not optional.
> > I would rather call clk_prepare_enable()
> > during probe() and keep the clock on.
>
> clk_enable() must not sleep and is supposed to be lightweight. This
> interrupt I believe is supposed to be infrequent, so having it here
> should be fine and might save us some power.
Didn't know that clk_enable()/clk_disable() never sleeps and yes it
should be infrequent triggered. I don't think that we can save a
measureable amount of power since this is Low-Power IP clocked by a
low-power clock. However, this was just my point of view.
> > > +
> > > return IRQ_HANDLED;
> > > }
> > >
> > > @@ -140,6 +149,23 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
> > > if (pdata->irq < 0)
> > > return -EINVAL;
> > >
> > > + pdata->clk = devm_clk_get_optional(&pdev->dev, "snvs-pwrkey");
> > > + if (IS_ERR(pdata->clk))
> > > + return PTR_ERR(pdata->clk);
> > > +
> > > + error = clk_prepare(pdata->clk);
> > > + if (error) {
> > > + dev_err(&pdev->dev, "failed to prepare the snvs clock\n");
> > > + return error;
> > > + }
> > > + error = devm_add_action_or_reset(&pdev->dev,
> > > + (void(*)(void *))clk_unprepare,
> > > + pdata->clk);
> >
> > I'm not a fan about those casts. However, the intentation should be
> > fixed.
>
> Yes, can we please create a proper function for this (or maybe we will
> finally get devm clk API?).
devm_clk API +1 :)
Regards,
Marco
Powered by blists - more mailing lists