linux-kernel - Re: [PATCH v4 2/4] input: gpio-vibra: Allow to use vcc-supply alone to control the vibrator

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20200730091812.7sia7w3waz2jj62a@core.my.home>
Date:   Thu, 30 Jul 2020 11:18:12 +0200
From:   Ondřej Jirman <megous@...ous.com>
To:     Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc:     linux-sunxi@...glegroups.com, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Maxime Ripard <mripard@...nel.org>,
        Chen-Yu Tsai <wens@...e.org>, Luca Weiss <luca@...tu.xyz>,
        Tomas Novotny <tomas@...otny.cz>, linux-input@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v4 2/4] input: gpio-vibra: Allow to use vcc-supply alone
 to control the vibrator

Hello Dmitry,

thanks for looking into the patch. :)

On Wed, Jul 29, 2020 at 11:19:39PM -0700, Dmitry Torokhov wrote:
> Hi Ondrej,
> 
> On Tue, Jul 14, 2020 at 12:23:01PM +0200, Ondrej Jirman wrote:
> > Make enable-gpio optional to allow using this driver with boards that
> > have vibrator connected to a power supply without intermediate gpio
> > based enable circuitry.
> > 
> > Also avoid a case where neither regulator nor enable gpio is specified,
> > and bail out in probe in such a case.
> > 
> > Signed-off-by: Ondrej Jirman <megous@...ous.com>
> > ---
> >  drivers/input/misc/gpio-vibra.c | 14 ++++++++++----
> >  1 file changed, 10 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/input/misc/gpio-vibra.c b/drivers/input/misc/gpio-vibra.c
> > index f79f75595dd7..b3bb7e61ed1d 100644
> > --- a/drivers/input/misc/gpio-vibra.c
> > +++ b/drivers/input/misc/gpio-vibra.c
> > @@ -39,7 +39,7 @@ static int gpio_vibrator_start(struct gpio_vibrator *vibrator)
> >  	struct device *pdev = vibrator->input->dev.parent;
> >  	int err;
> >  
> > -	if (!vibrator->vcc_on) {
> > +	if (vibrator->vcc && !vibrator->vcc_on) {
> >  		err = regulator_enable(vibrator->vcc);
> >  		if (err) {
> >  			dev_err(pdev, "failed to enable regulator: %d\n", err);
> > @@ -57,7 +57,7 @@ static void gpio_vibrator_stop(struct gpio_vibrator *vibrator)
> >  {
> >  	gpiod_set_value_cansleep(vibrator->gpio, 0);
> >  
> > -	if (vibrator->vcc_on) {
> > +	if (vibrator->vcc && vibrator->vcc_on) {
> >  		regulator_disable(vibrator->vcc);
> >  		vibrator->vcc_on = false;
> >  	}
> > @@ -112,7 +112,7 @@ static int gpio_vibrator_probe(struct platform_device *pdev)
> >  	if (!vibrator->input)
> >  		return -ENOMEM;
> >  
> > -	vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
> > +	vibrator->vcc = devm_regulator_get_optional(&pdev->dev, "vcc");
> 
> I know it is very surprising, but regulator_get_optional does not return
> NULL when regulator is not present, but rather ERR_PTR(-ENODEV). You
> need to replace it with NULL in the branch below, or change conditions
> to !IS_ERR(virbrator->vcc) (and still handle -ENODEV in the branch
> below).

Oops, I'll fix that in the next revision.

regards,
	o.

> >  	err = PTR_ERR_OR_ZERO(vibrator->vcc);
> >  	if (err) {
> >  		if (err != -EPROBE_DEFER)
> > @@ -121,7 +121,8 @@ static int gpio_vibrator_probe(struct platform_device *pdev)
> >  		return err;
> >  	}
> >  
> > -	vibrator->gpio = devm_gpiod_get(&pdev->dev, "enable", GPIOD_OUT_LOW);
> > +	vibrator->gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
> > +						 GPIOD_OUT_LOW);
> >  	err = PTR_ERR_OR_ZERO(vibrator->gpio);
> >  	if (err) {
> >  		if (err != -EPROBE_DEFER)
> > @@ -130,6 +131,11 @@ static int gpio_vibrator_probe(struct platform_device *pdev)
> >  		return err;
> >  	}
> >  
> > +	if (!vibrator->vcc && !vibrator->gpio) {
> > +		dev_err(&pdev->dev, "Neither gpio nor regulator provided\n");
> > +		return -EINVAL;
> > +	}
> > +
> >  	INIT_WORK(&vibrator->play_work, gpio_vibrator_play_work);
> >  
> >  	vibrator->input->name = "gpio-vibrator";
> > -- 
> > 2.27.0
> > 
> 
> Thanks.
> 
> -- 
> Dmitry