linux-kernel - [PATCH 3/8] spi: dw-dma: Configure the DMA channels in dma

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 31 Jul 2020 10:59:48 +0300
From:   Serge Semin <Sergey.Semin@...kalelectronics.ru>
To:     Mark Brown <broonie@...nel.org>
CC:     Serge Semin <Sergey.Semin@...kalelectronics.ru>,
        Serge Semin <fancer.lancer@...il.com>,
        Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
        Georgy Vlasov <Georgy.Vlasov@...kalelectronics.ru>,
        Ramil Zaripov <Ramil.Zaripov@...kalelectronics.ru>,
        Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
        Peter Ujfalusi <peter.ujfalusi@...com>,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Feng Tang <feng.tang@...el.com>, Vinod Koul <vkoul@...nel.org>,
        <linux-spi@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 3/8] spi: dw-dma: Configure the DMA channels in dma_setup

Mainly this is a preparation patch before adding one-by-one DMA SG entries
transmission. But logically the Tx and Rx DMA channels setup should be
performed in the dma_setup() callback anyway. So let's move the DMA slave
channels src/dst burst lengths, address and address width configuration to
the DMA setup stage. While at it make sure the return value of the
dmaengine_slave_config() method is checked. It has been unnecessary in
case if Dw DMAC is utilized as a DMA engine, since its device_config()
callback always returns zero (though it might change in future). But since
DW APB SSI driver now supports any DMA back-end we must make sure the
DMA device configuration has been successful before proceeding with
further setups.

Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
---
 drivers/spi/spi-dw-dma.c | 42 +++++++++++++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c
index ec721af61663..56496b659d62 100644
--- a/drivers/spi/spi-dw-dma.c
+++ b/drivers/spi/spi-dw-dma.c
@@ -257,11 +257,9 @@ static void dw_spi_dma_tx_done(void *arg)
 	complete(&dws->dma_completion);
 }
 
-static struct dma_async_tx_descriptor *
-dw_spi_dma_prepare_tx(struct dw_spi *dws, struct spi_transfer *xfer)
+static int dw_spi_dma_config_tx(struct dw_spi *dws)
 {
 	struct dma_slave_config txconf;
-	struct dma_async_tx_descriptor *txdesc;
 
 	memset(&txconf, 0, sizeof(txconf));
 	txconf.direction = DMA_MEM_TO_DEV;
@@ -271,7 +269,13 @@ dw_spi_dma_prepare_tx(struct dw_spi *dws, struct spi_transfer *xfer)
 	txconf.dst_addr_width = dw_spi_dma_convert_width(dws->n_bytes);
 	txconf.device_fc = false;
 
-	dmaengine_slave_config(dws->txchan, &txconf);
+	return dmaengine_slave_config(dws->txchan, &txconf);
+}
+
+static struct dma_async_tx_descriptor *
+dw_spi_dma_prepare_tx(struct dw_spi *dws, struct spi_transfer *xfer)
+{
+	struct dma_async_tx_descriptor *txdesc;
 
 	txdesc = dmaengine_prep_slave_sg(dws->txchan,
 				xfer->tx_sg.sgl,
@@ -346,14 +350,9 @@ static void dw_spi_dma_rx_done(void *arg)
 	complete(&dws->dma_completion);
 }
 
-static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
-		struct spi_transfer *xfer)
+static int dw_spi_dma_config_rx(struct dw_spi *dws)
 {
 	struct dma_slave_config rxconf;
-	struct dma_async_tx_descriptor *rxdesc;
-
-	if (!xfer->rx_buf)
-		return NULL;
 
 	memset(&rxconf, 0, sizeof(rxconf));
 	rxconf.direction = DMA_DEV_TO_MEM;
@@ -363,7 +362,16 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 	rxconf.src_addr_width = dw_spi_dma_convert_width(dws->n_bytes);
 	rxconf.device_fc = false;
 
-	dmaengine_slave_config(dws->rxchan, &rxconf);
+	return dmaengine_slave_config(dws->rxchan, &rxconf);
+}
+
+static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
+		struct spi_transfer *xfer)
+{
+	struct dma_async_tx_descriptor *rxdesc;
+
+	if (!xfer->rx_buf)
+		return NULL;
 
 	rxdesc = dmaengine_prep_slave_sg(dws->rxchan,
 				xfer->rx_sg.sgl,
@@ -382,10 +390,22 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 static int dw_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 {
 	u16 imr, dma_ctrl;
+	int ret;
 
 	if (!xfer->tx_buf)
 		return -EINVAL;
 
+	/* Setup DMA channels */
+	ret = dw_spi_dma_config_tx(dws);
+	if (ret)
+		return ret;
+
+	if (xfer->rx_buf) {
+		ret = dw_spi_dma_config_rx(dws);
+		if (ret)
+			return ret;
+	}
+
 	/* Set the DMA handshaking interface */
 	dma_ctrl = SPI_DMA_TDMAE;
 	if (xfer->rx_buf)
-- 
2.27.0