[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1596196808-5067-2-git-send-email-michal.vokac@ysoft.com>
Date: Fri, 31 Jul 2020 14:00:07 +0200
From: Michal Vokáč <michal.vokac@...ft.com>
To: Rob Herring <robh+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>,
Sascha Hauer <s.hauer@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Michal Vokáč <michal.vokac@...ft.com>
Subject: [PATCH 2/3] ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Orion board
Add devicetree for new variant of the Y Soft IOT appliance.
The board is based on Hydra with the following changes:
- faster SoC (1GHz), 4GB RAM and 64GB eMMC
- removed miniPCIe
- removed Audio jack
- removed uSD slot
- removed RJ10 serial
- HDMI replaced by USB host
Signed-off-by: Michal Vokáč <michal.vokac@...ft.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6dl-yapp4-orion.dts | 50 ++++++++++++++++++++++++++++++++
2 files changed, 51 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-yapp4-orion.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3fa5ae..eec0d61874a4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -482,6 +482,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-wandboard-revd1.dtb \
imx6dl-yapp4-draco.dtb \
imx6dl-yapp4-hydra.dtb \
+ imx6dl-yapp4-orion.dtb \
imx6dl-yapp4-ursa.dtb \
imx6q-apalis-eval.dtb \
imx6q-apalis-ixora.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
new file mode 100644
index 000000000000..0428720417ef
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2020 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+ model = "Y Soft IOTA Orion i.MX6DualLite board";
+ compatible = "ysoft,imx6dl-yapp4-orion", "fsl,imx6dl";
+
+ memory@...00000 {
+ device_type = "memory";
+ reg = <0x10000000 0xf0000000>;
+ };
+};
+
+&gpio_oled {
+ status = "okay";
+};
+
+&leds {
+ status = "okay";
+};
+
+&oled {
+ status = "okay";
+};
+
+®_usb_h1_vbus {
+ status = "okay";
+};
+
+&touchkeys {
+ status = "okay";
+};
+
+&uart2 {
+ status = "disabled";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbphy2 {
+ status = "okay";
+};
--
2.1.4
Powered by blists - more mailing lists