[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200801061227.GG61202@yoga>
Date: Fri, 31 Jul 2020 23:12:27 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Axel Lin <axel.lin@...ics.com>
Cc: Mark Brown <broonie@...nel.org>, Andy Gross <agross@...nel.org>,
"Angelo G . Del Regno" <kholk11@...il.com>,
Liam Girdwood <lgirdwood@...il.com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] regulator: qcom_spmi: Improve readability for setting up
enable/mode pin control
On Fri 31 Jul 22:48 PDT 2020, Axel Lin wrote:
> By checking data->pin_ctrl_enable / data->pin_ctrl_hpm flags first, then
> use switch-case to improve readability.
>
Nice!
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Regards,
Bjorn
> Signed-off-by: Axel Lin <axel.lin@...ics.com>
> ---
> drivers/regulator/qcom_spmi-regulator.c | 70 ++++++++++++-------------
> 1 file changed, 34 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
> index 5ee7c5305d95..05080483fe1b 100644
> --- a/drivers/regulator/qcom_spmi-regulator.c
> +++ b/drivers/regulator/qcom_spmi-regulator.c
> @@ -1633,45 +1633,43 @@ static int spmi_regulator_init_registers(struct spmi_regulator *vreg,
> return ret;
>
> /* Set up enable pin control. */
> - if ((type == SPMI_REGULATOR_LOGICAL_TYPE_SMPS
> - || type == SPMI_REGULATOR_LOGICAL_TYPE_LDO
> - || type == SPMI_REGULATOR_LOGICAL_TYPE_VS)
> - && !(data->pin_ctrl_enable
> - & SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT)) {
> - ctrl_reg[SPMI_COMMON_IDX_ENABLE] &=
> - ~SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK;
> - ctrl_reg[SPMI_COMMON_IDX_ENABLE] |=
> - data->pin_ctrl_enable & SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK;
> + if (!(data->pin_ctrl_enable & SPMI_REGULATOR_PIN_CTRL_ENABLE_HW_DEFAULT)) {
> + switch (type) {
> + case SPMI_REGULATOR_LOGICAL_TYPE_SMPS:
> + case SPMI_REGULATOR_LOGICAL_TYPE_LDO:
> + case SPMI_REGULATOR_LOGICAL_TYPE_VS:
> + ctrl_reg[SPMI_COMMON_IDX_ENABLE] &=
> + ~SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK;
> + ctrl_reg[SPMI_COMMON_IDX_ENABLE] |=
> + data->pin_ctrl_enable & SPMI_COMMON_ENABLE_FOLLOW_ALL_MASK;
> + break;
> + default:
> + break;
> + }
> }
>
> /* Set up mode pin control. */
> - if ((type == SPMI_REGULATOR_LOGICAL_TYPE_SMPS
> - || type == SPMI_REGULATOR_LOGICAL_TYPE_LDO)
> - && !(data->pin_ctrl_hpm
> - & SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
> - ctrl_reg[SPMI_COMMON_IDX_MODE] &=
> - ~SPMI_COMMON_MODE_FOLLOW_ALL_MASK;
> - ctrl_reg[SPMI_COMMON_IDX_MODE] |=
> - data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_ALL_MASK;
> - }
> -
> - if (type == SPMI_REGULATOR_LOGICAL_TYPE_VS
> - && !(data->pin_ctrl_hpm & SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
> - ctrl_reg[SPMI_COMMON_IDX_MODE] &=
> - ~SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
> - ctrl_reg[SPMI_COMMON_IDX_MODE] |=
> - data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
> - }
> -
> - if ((type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS
> - || type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS
> - || type == SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO)
> - && !(data->pin_ctrl_hpm
> - & SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
> - ctrl_reg[SPMI_COMMON_IDX_MODE] &=
> - ~SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
> - ctrl_reg[SPMI_COMMON_IDX_MODE] |=
> - data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
> + if (!(data->pin_ctrl_hpm & SPMI_REGULATOR_PIN_CTRL_HPM_HW_DEFAULT)) {
> + switch (type) {
> + case SPMI_REGULATOR_LOGICAL_TYPE_SMPS:
> + case SPMI_REGULATOR_LOGICAL_TYPE_LDO:
> + ctrl_reg[SPMI_COMMON_IDX_MODE] &=
> + ~SPMI_COMMON_MODE_FOLLOW_ALL_MASK;
> + ctrl_reg[SPMI_COMMON_IDX_MODE] |=
> + data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_ALL_MASK;
> + break;
> + case SPMI_REGULATOR_LOGICAL_TYPE_VS:
> + case SPMI_REGULATOR_LOGICAL_TYPE_ULT_LO_SMPS:
> + case SPMI_REGULATOR_LOGICAL_TYPE_ULT_HO_SMPS:
> + case SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO:
> + ctrl_reg[SPMI_COMMON_IDX_MODE] &=
> + ~SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
> + ctrl_reg[SPMI_COMMON_IDX_MODE] |=
> + data->pin_ctrl_hpm & SPMI_COMMON_MODE_FOLLOW_AWAKE_MASK;
> + break;
> + default:
> + break;
> + }
> }
>
> /* Write back any control register values that were modified. */
> --
> 2.25.1
>
Powered by blists - more mailing lists