linux-kernel - [PATCH v3 2/6] dt-bindings: interconnect: Add property to set BCM TCS wait behavior

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 31 Jul 2020 20:32:11 -0700
From:   Mike Tipton <mdtipton@...eaurora.org>
To:     georgi.djakov@...aro.org
Cc:     bjorn.andersson@...aro.org, agross@...nel.org,
        linux-pm@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Mike Tipton <mdtipton@...eaurora.org>
Subject: [PATCH v3 2/6] dt-bindings: interconnect: Add property to set BCM TCS wait behavior

Add "qcom,tcs-wait" property to set which TCS should wait for completion
when triggering.

Signed-off-by: Mike Tipton <mdtipton@...eaurora.org>
---
 .../bindings/interconnect/qcom,bcm-voter.yaml | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
index 5971fc1df08d..e23df4836c6f 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
@@ -21,6 +21,23 @@ properties:
     enum:
       - qcom,bcm-voter
 
+  qcom,tcs-wait:
+    description: |
+      Optional mask of which TCSs (Triggered Command Sets) wait for completion
+      upon triggering. If not specified, then the AMC and WAKE sets wait for
+      completion. The mask bits are available in the QCOM_ICC_TAG_* defines.
+
+      The AMC TCS is triggered immediately when icc_set_bw() is called. The
+      WAKE/SLEEP TCSs are triggered when the RSC transitions between active and
+      sleep modes.
+
+      In most cases, it's necessary to wait in both the AMC and WAKE sets to
+      ensure resources are available before use. If a specific RSC and its use
+      cases can ensure sufficient delay by other means, then this can be
+      overridden to reduce latencies.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+
 required:
   - compatible
 
@@ -39,7 +56,10 @@ examples:
   # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
   - |
 
+    #include <dt-bindings/interconnect/qcom,icc.h>
+
     disp_bcm_voter: bcm_voter {
         compatible = "qcom,bcm-voter";
+        qcom,tcs-wait = <QCOM_ICC_TAG_AMC>;
     };
 ...
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project