linux-kernel - [PATCH] dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's J7200 devices

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200802070114.9624-1-faiz_abbas@ti.com>
Date:   Sun, 2 Aug 2020 12:31:14 +0530
From:   Faiz Abbas <faiz_abbas@...com>
To:     <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-mmc@...r.kernel.org>
CC:     <robh+dt@...nel.org>, <ulf.hansson@...aro.org>
Subject: [PATCH] dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's J7200 devices

Add binding documentation for mmc host controllers present on
TI's J7200 SOC

Signed-off-by: Faiz Abbas <faiz_abbas@...com>
---
 Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
index 6d202f4d9249..b49cbfdd679f 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
@@ -12,6 +12,8 @@ Required Properties:
 			"ti,am654-sdhci-5.1": SDHCI on AM654 device.
 			"ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
 			"ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
+			"ti,j7200-sdhci-8bit": 8 bit SDHCI on J7200 device.
+			"ti,j7200-sdhci-4bit": 4 bit SDHCI on J7200 device.
 	- reg: Must be two entries.
 		- The first should be the sdhci register space
 		- The second should the subsystem/phy register space
@@ -33,7 +35,9 @@ Required Properties:
 	  These bindings must be provided otherwise the driver will disable the
 	  corresponding speed mode (i.e. all nodes must provide at least -legacy)
 
-Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit):
+Optional Properties (Required for ti,am654-sdhci-5.1,
+				  ti,j721e-sdhci-8bit,
+				  ti,j7200-sdhci-8bit):
 	- ti,trm-icp: DLL trim select
 	- ti,driver-strength-ohm: driver strength in ohms.
 				  Valid values are 33, 40, 50, 66 and 100 ohms.
-- 
2.17.1