[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200803194529.32357-6-james.quinlan@broadcom.com>
Date: Mon, 3 Aug 2020 15:45:10 -0400
From: Jim Quinlan <james.quinlan@...adcom.com>
To: linux-pci@...r.kernel.org,
Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
Christoph Hellwig <hch@....de>,
Robin Murphy <robin.murphy@....com>,
bcm-kernel-feedback-list@...adcom.com, james.quinlan@...adcom.com
Cc: Jim Quinlan <james.quinlan@...adcom.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Rob Herring <robh@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Florian Fainelli <f.fainelli@...il.com>,
linux-rpi-kernel@...ts.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-arm-kernel@...ts.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v10 05/11] PCI: brcmstb: Add bcm7278 PERST# support
From: Jim Quinlan <jquinlan@...adcom.com>
The PERST# bit was moved to a different register in 7278-type STB chips.
In addition, the polarity of the bit was also changed; for other chips
writing a 1 specified assert; for 7278-type chips, writing a 0 specifies
assert.
Of course, PERST# is a PCIe asserted-low signal.
Signed-off-by: Jim Quinlan <jquinlan@...adcom.com>
Acked-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/pci/controller/pcie-brcmstb.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 7c148eb65170..e5e7f7d82eda 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -83,6 +83,7 @@
#define PCIE_MISC_PCIE_CTRL 0x4064
#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1
+#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK 0x4
#define PCIE_MISC_PCIE_STATUS 0x4068
#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80
@@ -685,9 +686,16 @@ static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie, u32 val)
{
u32 tmp;
- tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
- u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK);
- writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+ if (pcie->type == BCM7278) {
+ /* Perst bit has moved and assert value is 0 */
+ tmp = readl(pcie->base + PCIE_MISC_PCIE_CTRL);
+ u32p_replace_bits(&tmp, !val, PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK);
+ writel(tmp, pcie->base + PCIE_MISC_PCIE_CTRL);
+ } else {
+ tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+ u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK);
+ writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
+ }
}
static inline int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
@@ -772,7 +780,10 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
/* Reset the bridge */
brcm_pcie_bridge_sw_init_set(pcie, 1);
- brcm_pcie_perst_set(pcie, 1);
+
+ /* BCM7278 fails when PERST# is set here */
+ if (pcie->type != BCM7278)
+ brcm_pcie_perst_set(pcie, 1);
usleep_range(100, 200);
--
2.17.1
Powered by blists - more mailing lists